1. FULLY PROGRAMMABLE DSP 모 델 명 DIGIDRIVE88 제 조 사 ATEIS 적 용 장 소 주 요 기 능 DIGIDRIVE88 Equipped with 24 bit AD / DA converter, DIGIDRIVE88 is a Conference broadcast system Features pre-amplifier, compressor-limiter, equalizer, as well as matrixing and Delay fuctions in one unit. It can also be controlled via 3rd Party host such as Crestron, AMX, VITY, Creator, or via a PC using an application software provided with. The user interface comprises 8 dials on the front and 8 analog control inputs. Each control input can be associated to the variable audio processing functions of the DIFIDRIVE88 ( input level, output level , routing , preset change...etc ). The RAC5 and RAC8 remote controller are ideally suited to be connected to the analog control inputs for Level and controls. DIGIDRIVE88 High efficiency ADI DSP processor SHARC21371 inside which processing speed is 266MHz, 1.596G FLOPS. 주 요 사 양 Audio input impedance: 10 kOhms Input sensitivity: -54dB ~ 0dB ( 4 software-selections ) Max input: +20dBU (Dynamic range:110dB) Bandwidth: 20Hz ~ 20KHz Phantom power soft config : 24VDC Audio output impedance: 50 Ohms Bandwidth: 20Hz ~ 30KHz Max output: +20dBU (Dynamic range:110dB) Total Harmonic Distortion: < 0.03%(DC power supply), <0.04%(AC/DC auto power switch), 20~20KHz. S/N: 102dB ( unity gain ) S/N: 85dB ( 54dB gain ) RS232 port: for ATEIS or third party equipment remote control. RS485 port: for Remote Controller ( ATEIS URC ) RJ45 port: for PC or NB control. 8 TTL inputs or analogue inputs. CMRR :>75dB. Crosstalk :<-85dB. Power supply: AC : 100 ~ 240 VAC, 50/60 Hz DC : 22 ~ 28 VDC Consumption : 60 VA 10 VA in stand-by mode CERTIFICATE :CE