Procedure for Slot Structure Start Time

Slides:



Advertisements
Similar presentations
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Advertisements

19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
EDMG-STF for OFDM Date: Authors: May 2017 Name Company
EDMG STF for OFDM in 2,3,4CB Date: Authors: July 2017 Name
On the Implementation of Dynamic Load Balancing for A-BFT Channel
Short SSW Frame for A-BFT
Duty cycle mode STA’s PS follow-up
Duty cycle mode STA’s PS follow-up
TBD clarification for TGba D0.1 (WUR Duty cycle)
Spec text clarification for FDMA
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Efficient TDD slot schedule mechanism
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
TBD clarification for TGba D0.1 (WUR Beacon)
On Random Access in A-BFT
Clarification on TXSS Sector List Feedback
Channel Access for WUR FDMA
Duty cycle mode STA’s PS follow-up
Mapping DN/CN of mmWave Distribution Network to DMG Entities
WUR Beacon transmission
BRP frame exchange in TDD SP
ACK operation in TDD SP Date: Authors: MAY 2018 Name
Procedure for Slot Structure Start Time
Signaling for 11ay Spatial Sharing
Multi-BF Procedure for 11ay
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Duty cycle mode STA’s PS follow-up
Ack/BA for mmWave Distribution Networks
Address field in WUR frame
WUR Discovery Period Announcement
Short SSW Frame for A-BFT
Data transmission detail in WUR mode
Multi-Beamforming in Polarized Channels for 11ay
Power saving operation for WUR STAs in duty cycle mode
Address field in WUR frame
WUR Action Frame Format
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
FDMA Channel signaling
Power saving operation for WUR STAs in duty cycle mode
Spec text clarification for FDMA
WUR Discovery Period Announcement
Considerations for WUR Response
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Multi-Channel Spatial Sharing for 11ay
WUR Synchronization Date: Authors: November 2017 Name
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
EDMG-Header-A contests
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Multi-BF Procedure for 11ay
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Multi-Channel Spatial Sharing for 11ay
FDMA Channel signaling
Generalized Multi-Beamforming for 11ay
Clarification on TXSS Sector List Feedback
Duty cycle mode STA’s PS follow-up
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
TBD clarification for TGba D0.1 (WUR Beacon)
Clarification of WUR frame related to group addressed frame
Power saving operation for WUR STAs in duty cycle mode
Spec text clarification for FDMA
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Channel Access for WUR FDMA
FDMA Channel signaling
Address field in WUR frame
Feedback of Short SSW Packet Based Sector Sweep in DTI
Clarification of WUR frame related to group addressed frame
Address field in WUR frame
Month Year doc.: IEEE yy/xxxxr0 May 2012
Presentation transcript:

Procedure for Slot Structure Start Time May 2015 doc.: IEEE 802.11-15/0496r1 MAY 2018 Procedure for Slot Structure Start Time Date: 2018-05-08 Authors: Name Company Address Phone Email Saehee Bang LG Electronics saehee.bang@lge.com JinMin Kim jinmin1230.kim@lge.com Kiseon Ryu kiseon.ryu@lge.com JinSoo Choi js.choi@lge.com SungJin Park allean.park@lge.com SunWoong Yun Sunwoong.yun@lge.com Sang G. Kim sanggook.kim@lge.com Edward Au (Marvell Semiconductor)

May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Introduction In 11ay D1.0, the following texts are described regarding TDD slot structure update. 10.36.6.2.2 SP with TDD channel access Upon reception of a TDD Slot Structure element corresponding to allocations identified by the Allocation ID subfield value within the element, a DMG STA shall adopt the TDD structure within the element for all the TDD SPs identified by the same Allocation ID subfield value until the time it receives an updated TDD Slot Structure element from the DMG AP or DMG PCP for the allocation. The TDD structure shall be adopted at the time indicated by the value of the Slot Structure Start Time subfield within the element. 9.4.2.267 TDD Slot Structure element The Slot Structure Start Time subfield indicates the lower 4 octets of the TSF timer at the start of the first TDD SP in which the slot structure takes effect. Edward Au (Marvell Semiconductor)

May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Issues Currently, it is recommended that DNs (distribution networks) use the same TDD slot structure and update it at the same time if possible since the TDD slot structure are shared among associated CNs and DNs. For multiple DNs to share the same TDD slot structure and update it at the same time, an updated TDD Slot Structure element should be exchanged among DNs early enough before its update takes effect. For this, the Slot Structure Start Time subfield should be able to indicate the time of several BIs later. However, it’s not clear which TDD slot structure is applied during the time right after a DMG STA received an updated TDD Slot Structure element till the time indicated by the Slot Structure Start Time in the updated TDD Slot Structure element. Edward Au (Marvell Semiconductor)

May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Proposed method If the newly updated slot structure element is applied after several BIs rather than the current BI, then the current slot structure must be maintained until “Slot Structure Start time” Examples of current assumptions According to the current spec , when a slot structure element is received, it is updated. Examples of proposed assumptions The Slot Structure Time indicates the time rather than the current BI, then the current slot structure must be maintained. Received New Slot structure element Indicates non-current BI time Slot Structure Start Time ( Slot structure change time) A Slot structure updated, but not applied. And no slot structure applied B No slot structure applied No slot structure applied No slot structure applied No slot structure applied new slot structure applied As you can see in this slide According to the current spec , when a new slot structure element is received (A) , old TDD structure is applied till (A) as the text below. a DMG STA shall adopt the TDD structure within the element for all the TDD SPs identified by the same Allocation ID subfield value until the time it receives an updated TDD Slot Structure element from the DMG AP or DMG PCP for the allocation.   We want to clarify the old TDD structure to be applied till (B) as the modified text below. a DMG STA shall adopt the TDD structure within the element for all the TDD SPs identified by the same Allocation ID subfield value until the time indicated in the Slot Structure Start Time subfield in an updated TDD Slot Structure element it receives an updated TDD Slot Structure element from the DMG AP or DMG PCP for the allocation. Received New Slot structure element Indicates non-current BI time Slot Structure Start Time ( Slot structure change time) Old slot structure applied Old slot structure applied Old slot structure applied Old slot structure applied new slot structure applied Maintained the current slot structure until Slot Structure Start Time BI with TDD slot structure changed Edward Au (Marvell Semiconductor)

May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Proposed method TDD Slot Structure elements can be sent over several BIs to ensure that DNs update the TDD slot structure simultaneously. Followings are proposed text: Upon reception of a TDD Slot Structure element corresponding to an allocation identified by the Allocation ID subfield value within the element, a DMG STA shall adopt the TDD structure described by the element for all the TDD SPs identified by the same Allocation ID subfield value at the time indicated by the value of the Slot Structure Start Time subfield in the element. From the time the DMG STA receives an updated TDD Slot Structure element until the TDD structure is adopted, the current TDD structure shall remain in effect it receives an updated TDD Slot Structure element from the DMG AP or DMG PCP for the allocation. To increase reliability, a TDD Slot Structure element can be sent more than once to the STA. The TDD structure shall be adopted at the time indicated by the value of the Slot Structure Start Time subfield within the element. Edward Au (Marvell Semiconductor)

May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Straw poll Do you agree to include the text for Slot Structure Start Time proposed in (11-18-0844-00-00ay-Procedure for Slot structure Start Time) to the spec draft? Followings are proposed text: 10.37.6.2.2 SP with TDD channel access Upon reception of a TDD Slot Structure element corresponding to an allocation identified by the Allocation ID subfield value within the element, a DMG STA shall adopt the TDD structure described by the element for all the TDD SPs identified by the same Allocation ID subfield value at the time indicated by the value of the Slot Structure Start Time subfield in the element. From the time the DMG STA receives an updated TDD Slot Structure element until the TDD structure is adopted, the current TDD structure shall remain in effect it receives an updated TDD Slot Structure element from the DMG AP or DMG PCP for the allocation. To increase reliability, a TDD Slot Structure element can be sent more than once to the STA. The TDD structure shall be adopted at the time indicated by the value of the Slot Structure Start Time subfield within the element. Edward Au (Marvell Semiconductor)

Reference [1] Draft P802.11ay_D1.0 MAY 2018 May 2015 doc.: IEEE 802.11-15/0496r5 MAY 2018 Reference [1] Draft P802.11ay_D1.0 Edward Au (Marvell Semiconductor)