LARP Phase II Secondary Collimator RC-0 and RC-1

Slides:

Advertisements

Similar presentations

Coll Eng E Doyle 1/18 LARP Phase II Secondary Collimator RC1 Prototype Engineering Status 6/21/06 Jaw-hub-shaft concept - continued Permanent.

Advertisements

Mech Systems Proposed EMI Modifications Marc Campell 9/2/03.

4m Undulator Design Concepts Amanda J Brummitt CCLRC RAL On behalf of the HeLiCal Collaboration.

Status of the LARP Phase II Secondary Collimator Prototype 30 September 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US.

Update on Be Wall Cavity Steve Virostek Lawrence Berkeley National Lab MTA RF Workshop November 15, 2010.

Status of the LARP Phase II Secondary Collimator Prototype 14 October 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.

SLAC rotating collimator for HiRadMat beam tests 14 March 2014 S. Redaelli, A. Bertarelli, CERN T. Markiewicz, SLAC US LHC Accelerator Research Program.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes now twist, under vacuum, as jaws turn, with R~1.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes twist, under vacuum, as jaws turn, with R~1 m.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes twist, under vacuum, as jaws turn, with R~1 m.

SPL cryo-module conceptual design review Cavity, helium vessel and tuner assembly N. Valverde, G. Arnau, S. Atieh, I. Aviles, O. Capatina, M. Esposito,

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes now twist, under vacuum, as jaws turn, with R~1.

MECHANICAL DESIGN OF TCSP COLLIMATORS Secondary Collimators Embedding BPMs L. GENTINI, A. Dallocchio, A. Bertarelli, F. Carra, M. Garlasche.

Door seal test set-up concepts 10/10/2015Robin Lafever LBNL1 Generic Door seal concepts for personnel access and feed-through applications in the CUORE.

LHC Phase II Collimator teleconference - 4 March 2008LHC Rotatable Phase II Collimators 1 beam LARP Phase II collimator Progress and Plans 4 March 2008.

1 LARP Phase II Secondary Rotatable Collimator Evolution of design changes 3 rd March, 2010.

RWA, 8/12/2006 Present Preliminary Production Plan All still preliminary, as we are re-establishing production. January 9 th,2007: –Delivery of 2 ring.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 06 June 2006 No 1 /17 LARP Phase II Secondary Collimator RC1 Collimator Test Program Plan Forward Revised.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 16 May 2006 No 1 /22 LARP Phase II Secondary Collimator RC1 Collimator Test Program Revised 5/15/06.

SLAC RC Status Report 30 August 2010 LHC Collimation Working Group Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

SLAC R&D Mtg November 2007LHC Rotatable Phase II CollimatorsSlide # / 17 beam LARP Rotatable Collimators for LHC Phase II Collimation 12 November.

LARP LHC PHASE II COLL RC1 - S. Lundgren 1 April 2009 No 1 /6n LARP Phase II Secondary Collimator RC-1 Mechanical Design Review 01/04/09.

TCLDA Design status Collimation Upgrade Specification Meeting L. GENTINI.

The Stripping Foil Test Stand in the Linac4 Transfer Line

A. Bertarelli CERN TS – MME Group 1 CERN European Organization for Nuclear Research Actuating system of the LHC Collimators (Phase 1) Main Features.

UK Neutrino Factory Meeting Front End Test Stand (F.E.T.S.) Engineering Status by P. Savage 22nd April 2009.

Main features of PETS tank J. Calero, D. Carrillo, J.L. Gutiérrez, E. Rodríguez, F. Toral CERN, 17/10/2007 (I will review the present status of the PETS.

Beam Rotatable Collimators as a Possible US Contribution to the LHC Luminosity Upgrade Project 24 April 2008 LARP CM#10 Tom Markiewicz/SLAC BNL - FNAL-

Task List for Phase II Rotatable Collimator Project at SLAC 30 January 2007 CERN/LARP Video Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.

LARP LHC PHASE II SECONDARY COLLIMATOR CD1 REVIEW. - E. Doyle 15 Dec /25 LARP Phase II Secondary Collimator RC1 Review SLAC 12/15/05 Prototype Engineering.

Updated Design of TCLD whit reduced jaw length Collimation Upgrade Specification meeting L. GENTINI.

LARP Rotatable Collimators for LHC Phase II Collimation 09 July 2007 SLAC R&D Status Meeting Gene Anzalone, Eric Doyle, Lew Keller, Steve Lundgren, & Tom.

A. Bertarelli – A. DallocchioWorkshop on Materials for Collimators and Beam absorbers, 4 th Sept 2007 LHC Collimators (Phase II): What is an ideal material.

LARP Rotatable Collimators 19 June 2006 ILC R&D Status Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 30 Jan 2007 No 1 /13 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 10 Dec 2007 No 1 /12 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 1/17 LARP Phase II Secondary Collimator RC-1 Collimator Development Status and Outlook Revised.

PXIE RFQ Engineering Design Steve Virostek Engineering Division Lawrence Berkeley National Laboratory April 10, 2012 Project X Collaboration

1 SLAC RC Status Report 19 July 2010 LHC Collimation Working Group Meeting Jeff Smith/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

Prototype Cryomodule FDR Ken Premo 21 – 22 January 2015 High Power Coupler Design.

LARP Phase II Secondary Collimator Status Report SLAC ILC R&D Summary Meeting 24 April 2006 T. Markiewicz/SLAC.

Florian Buchsteiner (HEPHY Vienna)

News and Introduction from CERN June 15th, 2005

LARP Phase II Secondary Collimator RC1, ETC - Status 4/10/06

BSS Prep work at CERN and Acceptance of Parts

LARP Phase II Secondary Collimator RC1

Complementary ISTC Projects #3888, 3889p

Review on collimator movement with stepping motors

LARP Phase II Secondary Collimator RC1

LARP Phase II Secondary Collimator RC1

Preliminary Y-chamber specifications – First draft

LARP Phase II Secondary Collimator RC1 Review SLAC 12/15/05 RC1 Construction and Test Plan LARP LHC PHASE II COLL REVIEW – RC1.

LARP Phase II Secondary Collimator RC-1

SLAC RC Status Report US LHC Accelerator Research Program

Review on collimator movement with stepping motors

Recommendations of 12/16/05 review committee & SLAC response

23 April 2012 Tom Markiewicz/SLAC

¼ meshed models for Omega3P calculations

LARP Phase II Secondary Collimator RC1

Phase II Collimators : design status

questions for cern – doyle rev 7/09/07 1/5

LARP Phase II Secondary Rotatable Collimator

LARP Phase II Secondary Rotatable Collimator

LARP Phase II Secondary Rotatable Collimator

LARP Phase II Secondary Collimator RC-1

LARP Phase II Secondary Collimator RC-1

LARP Rotatable Collimators for LHC Phase II Collimation

LARP Phase II Secondary Collimator RC-1

Engineering Update E. Doyle 5/16/06

LARP Phase II Secondary Collimator RC-0 and RC-1

Presentation transcript:

LARP Phase II Secondary Collimator RC-0 and RC-1 Collimator Development Status Revised 03/16/09 LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 1 /5

RC-1 Status 1st Mandrel mounted in 4th. axis milling machine for grooving. Part delayed due lack of at vendor. 1st Hub plating and final machining in the SLAC shop queue. 1st Mandrel/Coil Assembly is planned for winding in early April with brazing to follow. Will release Mandrel Braze assembly machining drawing after brazing has been completed. Glidcop material for the Jaws is delayed. Delivery not until mid-May!! LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 2 /5

Near Term End Support Flex Vane drawings in work now. Braze tests are planned later for round tubing configuration. Square Cu-Ni tubing obtained from CERN will be brazed into square grooved mandrel section at a later date. LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 3 /5

Tank design concept defined Tank constructed from a standard 355.6mm dia. x 6.35mm wall type 304 Stainless Steel pipe. Combining the CERN bellows/tank base plate design with a modified pipe seems to make the most sense for us at this time. Flanges on each end provide access to the RF foils, end supports and ratchet mechanisms after the appropriate cool down period. Chain Tensioners clamp the CF gaskets LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 4 /5

90 Degree Collimator orientation used for Robustness Test Existing CERN Phase 1 Cross Roller Dives with upgraded motors Existing CERN Phase 1 Interface Plate & Stand Use 90 Degree orientation in LHC Tunnel ? Use upgraded CERN Drives ? Remove other beam pipe for installation? LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 5 /5

Main Constraints Transport Stay Clear 1406mm 394mm 503mm Survey LARP LHC PHASE II COLL RC1 - S. Lundgren 16 Mar 2009 No 6 /5