Beauty Alliance Prepared by Russell Walz OK BAI Location Hazardous Materials Transportation, DOT Awareness Training Procedures for Small Package Ground,

Slides:



Advertisements
Similar presentations
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
Advertisements

Working Safely in an Engineering Environment Element 1 - Comply with statutory regulations and organisational requirements Page 2File ref:
CHEMICAL MANAGEMENT. Agency Missions: Agency Missions: OSHA – Protection of employees from workplace injury and illness. OSHA – Protection of employees.
© Les Kelly Complete Training UK 2012 Driver Certificate of Professional Competence Course 7 Operational Procedures.
Compressed Gases Slide Show Notes
4/23/2015 P.E.S.A.W.(public employees safe at work) 1 Safety Webinar: Hazard Communication and “Your Right to Know” Sponsored by the Georgia Department.
COMPRESSED GASES. Compressed Gases Chemicals include oxygen, argon, nitrogen, helium, acetylene, hydrogen, nitrous oxide, carbon dioxide, ammonia, chlorine,
MODULE 1 Introduction to OSHA and DOT Training.
This presentation is for illustrative and general educational purposes only and is not intended to substitute for the official MSHA Investigation Report.
Resource Conservation and Recovery Act.
A clerk in the sales department receives customer orders by mail and prepares four copies of a sales order.
1 University of Alaska Fairbanks Environmental Health, Safety, & Risk Management September 2010.
HAZARDOUS MATERIALS (HAZMAT)
2.3.6 Student Book © 2004 Propane Education & Research CouncilPage Performing a Walk-Around Inspection of the Transport After Loading Performing.
SkillsTech Australia Records & Reports Stage 2 Units: UEEPOO1,2,3B
ESSENTIAL SAFETY MEARURES IN BUILDINGS PRESENTED BY: BRUCE HOWIE.
INSPECTIONS: WHAT TO LOOK FOR HERB WAGNER, DIRECTOR, OEHS UNIVERSITY OF ARIZONA LABORATORY FIRE SAFETY.
Hazardous Materials Transportation
HAZARDOUS MATERIALS TRAINING! What do we do with this stuff, it looks dangerous?!?
For Packaging & Shipping of Regulated Medical Waste and Pharmaceutical Waste U.S DOT Hazmat Training.
Importance of Documentation Demonstratin g Due Diligence concept application defense.
+ DOT Shipping Primer Dwight Clark, CHMM Full Circle Compliance, LLC.
Health & Safety of Truckers within the United States MaryAnn Garrahan, OSHA NAFTA Land Transport Conference San Antonio, Texas May 31, 2002.
Cargo Tanks Portable Tanks DOT Requirements. Hazmat Employers/Employees v Employers who use one or more employees in connection with: transporting hazardous.
Standard 29 CFR Part Flammable & Combustible Liquids.
EGRESS AND FIRE PROTECTION
© Copyright SafetyInstruction.com 2006 FIRE - SLIDE 1 OF 59 WELCOME OSHA 29 CFR INDUSTRIAL FIRE SAFETY CORPORATE SAFETY TRAINING.
To start… Define the following words using your textbook: Qualitative Quantitative Independent variable (p 534) Dependent variable (p 534)
East Tennessee State University
Employment-Related Injuries Chapter 24. OSHA Occupational Safety and Health Administration Primary representative of protective agencies Primary representative.
OSHA Requirements for Safety Jesse LaPrade Extension Environmental and Safety Specialist The Alabama Cooperative Extension System and Auburn University.
Module 1 : Lesson 1: Working safety in the shop
1 University of Alaska Fairbanks Environmental Health, Safety, & Risk Management August 2015.
Hot Work Procedure Training
Safe handling, Storage, and Disposal of Chemicals
HONR 297 Environmental Models
Top 10 OSHA Violations and How to Avoid Them. Agenda OSHA Violations and Penalty Structure –How Much Can the Fines Be? Most Frequently Cited Standards.
OSHA Revised Hazard Communication Standard What you need to know and your responsibility under the new rules.
Prepared by Michele Mascia “This workforce solution was funded by a grant awarded under Workforce Innovation in Regional Economic Development (WIRED) as.
Occupational Health & Safety Legislation -companion resources > In Class NL OHS Act Binder.
4.2.3 Student Book © 2004 Propane Education & Research CouncilPage Transporting Materials of Trade To transport hazardous material as a material.
Transportation Program Safety Policy
Picking Up A Shipment Paperwork Training. Picking Up A Shipment  When you arrive at the shipper's premises to pick up a shipment, it is your responsibility.
At Yeelein: design & sourcing services converge  Yeelein Textile Company is a trust-worthy company for baby products and home fashions.
NPF MANAGERS OHS ACCOUNTABILITY HS3_ AGENDA 2 Reference Accountabilities.
Lesson 1 - WHMIS and its Importance
Flammable and Combustible Liquids Standard 29 CFR Part City of Council Bluffs Presented by: SilverStone Group © 2006, 2012 Zywave, Inc. All rights.
Safety and Health Program Don Ebert- Risk Manager (509)
BY FRANS WILBRINK WILBRINK & ASSOCIATES. OUTLINE Classify the different types of hazardous areas Identify the risks associated with each of these areas.
OCCUPATIONAL SAFETY INSPECTIONS: HOW TO REPRESENT YOUR CAMPUS DURING THE INSPECTION PROCESS University of Wisconsin System Office of Safety and Loss Prevention.
Transportation of Dangerous Goods HCS Introduction A dangerous good is any material that can cause injury to others By law, a worker must be trained.
Hot Work Permit Osan AB Fire Emergency Services.
Every employer must ensure, as far as is reasonable practicable, the health, safety and welfare of all his employees More specifically, employers must.
HAZCOM Hazardous Communication 29 CFR “Right To Know”
Your name You and the Law Understanding Your Obligations Under the OHSA 1.
Shipping Dry Ice Training University of Notre Dame Risk Management & Safety
Breakout Session Summary Transportation Industry
St. Lawrence-Lewis BOCES “Right to Know” Training
Breakout Session Summary Transportation Industry
Hours of Service Regulations
DOT Rail Car Procedure The Federal Railroad Administration (FRA) is an agency in the United States Department of Transportation (DOT). The agency was.
An Introduction to WHMIS
Protection of power conductors from mobile equipment
Protection of power conductors from mobile equipment
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
Hazardous Material Training
Breakout Session Summary Transportation Industry
Hazardous Substances.
Shipping and Receiving Hazardous Materials
Presentation transcript:

Beauty Alliance Prepared by Russell Walz OK BAI Location Hazardous Materials Transportation, DOT Awareness Training Procedures for Small Package Ground, LTL, Full Truck Load

Our Responsibility!!! Many Beauty Alliance products are hazardous and therefore regulated by the Department of Transportation (DOT). Strict rules must be followed when shipping these products to customers. Serious violations result in large fines. DOT training every three years

Training Obligations!

WHO Must Comply!!!

Penalties!!! You can be held accountable!!! Training must be conducted within 30 days of employment! Until the employee is trained and certified, he/she must work under the supervision of an employee that has full DOT Hazardous DOT Training.

BAI AIR Shipping Policy Product is NOT to be shipped via AIR freight for any reason. Product is NOT to be shipped via AIR freight for any reason. If a non product related package is going to be shipped air it must be logged, inspected by the warehouse manager or general manager and signed off on. Ex- envelopes, computer hardware…. If a non product related package is going to be shipped air it must be logged, inspected by the warehouse manager or general manager and signed off on. Ex- envelopes, computer hardware….

All transporters must follow DOT Regulations!!!

Commonly Found DOT Hazard BAI Flammable Liquid = Liquids which could easily catch fire in the event of contact with spark, flame or other fire source. Flammable Liquid = Liquids which could easily catch fire in the event of contact with spark, flame or other fire source. These products should be kept away from oxidizers. These products should be kept away from oxidizers. Based on a test that determines the chemical flash point to be <140F. Based on a test that determines the chemical flash point to be <140F. Flammable Solid = Solid which will easily ignite and burn in the presence of a spark, flame or other fire source. Flammable Solid = Solid which will easily ignite and burn in the presence of a spark, flame or other fire source. These products should be kept away from oxidizers. These products should be kept away from oxidizers. Based on a test called a burn rate. Based on a test called a burn rate. Packages containing these hazardous classes must be processed properly to meet DOT requirements.

Commonly Found DOT Hazard BAI Oxidizer = A reactive material that can create its own oxygen and keep burning, unless managed in a way that controls the fire (foam, etc.). Oxidizer = A reactive material that can create its own oxygen and keep burning, unless managed in a way that controls the fire (foam, etc.). Fire, flames, heat and moisture should not be allowed to come into contact with these products. Fire, flames, heat and moisture should not be allowed to come into contact with these products. Based on a test that determines how a chemical will react to heat and moisture. Based on a test that determines how a chemical will react to heat and moisture. Should be stored away from flammable materials. Should be stored away from flammable materials. Corrosive = Material that could chemically burn the eye, skin or respiratory system if contact with the body occurs (could take a long time or a short time to experience pain). Corrosive = Material that could chemically burn the eye, skin or respiratory system if contact with the body occurs (could take a long time or a short time to experience pain). Can damage other containers if leaking occurs. Can damage other containers if leaking occurs. Can damage its own container if placed in the wrong packaging. Can damage its own container if placed in the wrong packaging. Usually based on a test that measures the pH or likelihood of a chemical to cause burns. Usually based on a test that measures the pH or likelihood of a chemical to cause burns.

ORM-D = ORM-D products ARE HAZARDOUS!!! They could be flammable liquids, oxidizers and sometimes corrosives or flammable solids… ORM-D = ORM-D products ARE HAZARDOUS!!! They could be flammable liquids, oxidizers and sometimes corrosives or flammable solids… Products with this label are able to be shipped using more relaxed rules than fully regulated products Products with this label are able to be shipped using more relaxed rules than fully regulated products ORM-D classification makes it easier to ship hazardous materials via ground transport – one label + up arrows only, no special shipping papers for ground transport, no special boxes ORM-D classification makes it easier to ship hazardous materials via ground transport – one label + up arrows only, no special shipping papers for ground transport, no special boxes Not all products are able to be exempt from the regs. Not all products are able to be exempt from the regs. Have to be a certain hazard type and limited quantity or small sized internal containers Have to be a certain hazard type and limited quantity or small sized internal containers Fully Regulated = Hazardous products whose internal containers or hazard type can not use an ORM-D classification – require special box design, additional labeling and shipping papers Fully Regulated = Hazardous products whose internal containers or hazard type can not use an ORM-D classification – require special box design, additional labeling and shipping papers Packages containing these hazardous classes must be processed properly to meet DOT requirements. ORM-D vs. Fully Regulated

What does an ORM-D box look like?

What does a Fully Regulated box look like?

Placards!! You must keep a supply of Hazardous Placards on hand. Carriers may ask for these to display on their trucks while transporting our goods after reviewing our bills for hazardous types.. You must keep a supply of Hazardous Placards on hand. Carriers may ask for these to display on their trucks while transporting our goods after reviewing our bills for hazardous types..

Label Definitions Up Arrows- Must be presented on all hazardous packages that contain liquid material, up arrows must be on opposing sides of the package and must be two color Up Arrows- Must be presented on all hazardous packages that contain liquid material, up arrows must be on opposing sides of the package and must be two color ORM-D Labels- Must be presented on all packages classified as ORM-D and must be clearly visible on at least one side of the carton ORM-D Labels- Must be presented on all packages classified as ORM-D and must be clearly visible on at least one side of the carton Fully Regulated Hazardous Materials Labels – must be visibly presented on at least one side of all cartons containing hazardous materials that can not use the ORM-D exemption. Labels that may be used are shown below. Fully Regulated Hazardous Materials Labels – must be visibly presented on at least one side of all cartons containing hazardous materials that can not use the ORM-D exemption. Labels that may be used are shown below.

Job Specific Training DOT Requires employers to train employees in the job specific tasks that they will be assigned to while processing packages, the next 4 slides will demonstrate the required tasks for- DOT Requires employers to train employees in the job specific tasks that they will be assigned to while processing packages, the next 4 slides will demonstrate the required tasks for- Small Package Shipping Small Package Shipping QA QA LTL LTL Unclassified Message Unclassified Message

Small Package Shipping DOT Procedure Small Package Shipping DOT Procedure Check the Package for DOT labels Check the Package for DOT labels If the Package does not contain hazardous items, process package as normal. If the Package does not contain hazardous items, process package as normal. If DOT labels are present or the package contains hazardous items, verify the package is marked correctly. Process the package in World Ship ensuring that the proper hazard class is checked in the system. This will ensure that the hazard class is on the UPS manifest. If DOT labels are present or the package contains hazardous items, verify the package is marked correctly. Process the package in World Ship ensuring that the proper hazard class is checked in the system. This will ensure that the hazard class is on the UPS manifest. Fully regulated items are to be shipped in original manufacturer marked full cases ONLY! Fully regulated items are to be shipped in original manufacturer marked full cases ONLY!

Additional UPS Requirements to be done at manifesting All fully regulated packages must be labeled with specific UPS Hazardous materials shipping papers (which will print out when the package is manifested through Star Ship and World Ship).. You can order these documents through your UPS REP. For reference to UPS Hazmat shipping guidelines please visit- All fully regulated packages must be labeled with specific UPS Hazardous materials shipping papers (which will print out when the package is manifested through Star Ship and World Ship).. You can order these documents through your UPS REP. For reference to UPS Hazmat shipping guidelines please visit-

LTL Order Shipping All DOT labeling outside of fully regulated cartons will be done in picking by the order picker for both full cases and totes. All DOT labeling outside of fully regulated cartons will be done in picking by the order picker for both full cases and totes. If the package contains ORM-D, the Picker will be prompted by the wearable to apply the appropriate DOT-Labels If the package contains ORM-D, the Picker will be prompted by the wearable to apply the appropriate DOT-Labels The picker can not move to the next package until the proper ORM-D label and up arrows are applied and the carton or tote is scanned complete….. The picker can not move to the next package until the proper ORM-D label and up arrows are applied and the carton or tote is scanned complete…..

QA Fully Regulated cartons will be directed by the system to Quality Control to be inspected ensuring that the carton meets all DOT labeling and packaging rules. All Labeling of fully regulated packages will be applied in QA by trained authorized personnel. QA personnel will scan the package, the system will generate a label with the proper fully regulated carton information (UN#, Shipping Name, 4g) and apply it along with the provided proper placard label. Random ORM-D packages will be directed by the system to QA to be inspected ensuring that the package meets all DOT labeling and packaging rules.

Unclassified Items Definition- Any SKU in the BAI database that has not been reviewed by Regulatory Affairs for proper DOT classification is defined as Unclassified If you receive the following message on your computer, scan gun or wearable when scanning a package, you must follow the established procedure. If you receive the following message on your computer, scan gun or wearable when scanning a package, you must follow the established procedure. The Package must be given to the assigned site designee and Regulatory Affairs must be notified to classify the item or items. The Package must be given to the assigned site designee and Regulatory Affairs must be notified to classify the item or items.

Shipping All Hazmat information will be accumulated by the system and printed electronically on our outbound Bill of Lading and UPS manifest. All Hazmat information will be accumulated by the system and printed electronically on our outbound Bill of Lading and UPS manifest. Only employees that have completed the full DOT shipping training are allowed to sign manifests/bill of ladings and will be appointed by the site manager. Only employees that have completed the full DOT shipping training are allowed to sign manifests/bill of ladings and will be appointed by the site manager.

STOP!!!! If you dont know… ? ? … the package does not go!

Security Procedures/Emergency Response Drivers must check in and out before being loaded or unloaded. Drivers must check in and out before being loaded or unloaded. Drivers must remain with the load or in specified driver holding area. Drivers must remain with the load or in specified driver holding area. Manifests and BOLs must be reviewed prior to loading or unloading trucks. Manifests and BOLs must be reviewed prior to loading or unloading trucks. Contract carriers must have pre-determined delivery times. Contract carriers must have pre-determined delivery times Emergency Response numbers should be on all outbound freight bills Emergency Response numbers should be on all outbound freight bills. Emergency Response Plan should be initiated upon any spill or chemical release during a delivery to your facility. Emergency Response Plan should be initiated upon any spill or chemical release during a delivery to your facility.

QUIZ ORM-D are packages considered hazardous material- True or False ORM-D are packages considered hazardous material- True or False Only one side of hazmat packages need up arrows- True or False Only one side of hazmat packages need up arrows- True or False Only totes contain hazmat items- True or False Only totes contain hazmat items- True or False All employees can sign bill of ladings- True or False All employees can sign bill of ladings- True or False Training must be conducted for all new BAI employees within 30 days- True or False Training must be conducted for all new BAI employees within 30 days- True or False You must use a 32 ECT box for hazardous packages that weigh between 0 and 20 (per UPS) - True or False You must use a 32 ECT box for hazardous packages that weigh between 0 and 20 (per UPS) - True or False The penalty for violating the Hazardous Materials Regulations can result in criminal penalties of up to 10 years in prison- True or False The penalty for violating the Hazardous Materials Regulations can result in criminal penalties of up to 10 years in prison- True or False Fully Regulated boxes dont need to be marked with the proper hazardous label- True or False Fully Regulated boxes dont need to be marked with the proper hazardous label- True or False BAI encourages employees to ship hazardous material via air- True or False BAI encourages employees to ship hazardous material via air- True or False Hazardous materials when transported can be a risk to health, safety and property- True or False Hazardous materials when transported can be a risk to health, safety and property- True or False

Quiz Answers 1- True 2- False 3- False 4- False 5- True 6- True 7- True 8- False 9- False 10- True

Dot Training Class Roster Date_____________ Instructor______________ Name______________________ Name______________________