Clean Line Valve System CL03 / CL03-XL The valve system for wash-down applications

At a Glance Hygienic design (EHEDG-certified) Protection class: IP69k Resistant to cleaning agents Single valve, multipole-, field bus connection Up to 32 pressure zones possible Modularity in steps of 1 Flow 850 – 1100 NL/min (combinable) Dual pressure application Vacuum application Sturdy HF03/03-valve Pneumatic connections in metric & inch Online-Configurator

Modular Concept 1 to 16 valves in one valve system Up to 18 valves at CL03-XL by parallel actuation Extendendable in steps of 1 Exchange of valves without disassembling of valve system Tie rod principle Pilot air supply can be selected Field bus und multipole connection exchangeable Pilot air setting Internal out of channel 1 Internal out of channel 5 External Tie rod Extendable in steps of 1 Base plate is modular 2 ports (2,4) 4 ports (2,3,4,5) 5 ports (1,2,3,4,5) Universal interface For multipole connection For field bus Channel seperation Up to 32 pressure zones

Hygienic Design Valve cover Polyamide 12 Fiberglass reinforced Screws and threat Stainless steel All exterior metal parts The Design of CL03 corresponds to the specifications of EHDG EHEDG-certified Materials resistant to cleaning agent e.g.: caustic soda, phosphoric acid, sodium Well mechanical properties Low hydroscopicity Manuel override Protected by cover Seals HNBR Visual seal between base plate Base plate and end plate Polyamide 12 Fiberglass reinforced Visual seal between valve cover and base plate

CL03 with Field bus and HF02/03 Valves Field bus coupler Profinet Ethernet IP Profibus CanOpen Device Net CL03-XL-Valve HF02-Valve 1100 NL/min Additional supply (1,3,5) CL03-Valve HF03-Ventil 850 NL/min Additional supply (3,5)

CL03-Singel-Valve with HF02/03 Valves Screws and threats Stainless steel All exterior metal parts LED-Indication Yellow LED for actuation status Electrical connection M12x1 Stainless steel Seals between base plate and cover Base plate and valve cover Polyamide 12 Fiberglass reinforced CL03-Valve HF03-Ventil 850 NL/min Valve function: 5/2, 5/3, 2x 3/2 Manual override turn/detend (covered) Thread connection G1/8 / M5

Protection Class IP69K The object, in this case the valve terminal system CL03, is sprayed with water of high pressure. The test requires: a water pressure of 100 bar a flow of 14-16 l/min a water temperature of 80°C sprayed from a distance of 10-15 cm The object rotates with a speed of 5 rpm. during the test and water is sprayed from 4 different angles (0°, 30°, 60° and 90°) in 30 sec. per angle The acceptance conditions for IPX9K are fulfilled if water, sprayed with high pressure on the object from any angle, makes no harm to the object.

Technical Data Valve functions 5/2, 5/3cc, 2x3/2nc,no Extension up to 16 (18) valves with up to 32 coils Flow rate Qn max CL03 with HF03 valves 850 l/min CL03-XL with HF02 valves 1100 l/min Working pressure -0.9 – 10 bar Control pressure 3 – 10 bar Ambient temperature 0 – 50 °C IP Protection IP69K Power consumption 0,35 W Voltage 24 VDC (-15 %/ +20 %) Field bus protocols Profinet, Ethernet IP, Profibus DP, CANopen, DeviceNet

Pneumatic Connections Internal / external pilot control via 1, 5 or X Left end plate: Air exhaust (3/5): G3/8 Air supply (1): G1/2 (Air supply also possible with 3 and 5) Right end plate: Air supply (1): G1/2 Pilot control air exhaust (R): G1/8 Pilot control supply (X): G1/8 Base plate: Connections (2/4): G1/4 (optionally available with a cartridge for a 5/16 inch hose) Optional: additional air supply over 3,5

Pneumatic Connections Single Valve 3 1 4 R (pilot exhaust air) Vent (Ventilation) Mounting thread Mounting thread 2 5 X (always external pilot supply)

Pressure Zones Creation of several pressure zones is possible by closing channels 1, 3, and 5 (every valve can be controlled with separate air supply) Up to 32 different levels of pressure in one system (two different pressure levels in every valve) Each valve can be provided with individual air supply Channels sealed between the sub plates Different pressure levels in connections 3 and 5

Dimensions M6 (2x in every end plate and in every base plate with 4 connections 149 G3/8 90 G1/2 135.25 mm + no. of base plates x 30 mm G1/4 (US, connection 5/16) 237.25mm + number of base plates x 30mm) 267.5 mm + number of base plates x 30 mm G1/4 (US, connection 5/16) 169 42 G1/8 G1/2 78.5

Advantages and Customer Benefits Modular building system Modularity in steps of 1 Easy extension Flexible Electrical connection D-SUB, field bus, single valve Variable connectivity Wide range of electrical connections Hygienic design Protection class IP69k Sturdy HF02/03-valves Optimal for food-applications Washable, cleaning agent resistant Reliable valve technology AVENTICS Configurator Product documentation Complete documentation Immediate availability