CorroCrush DEMO

Test Samples before Test All Test Samples were from CR4 grade steel Size: 150x 70mm² and 1mm thick

Application Of CorroClean

Note how CorroClean removes all the oil and dirt CorroClean Results Note how CorroClean removes all the oil and dirt

Sample washed and Dried After surface is free of all dirt, oil and loose rust. It is ready For CorroCrush to be applied.

Application of CorroCrush Milky off-white coating when applied 1 min after coated Even now the rust is being converted to a black substance

Application of CorroCrush 5 min after Application the conversion process is well underway

Conversion process 30 min after application CorroCrush is now dry to touch or ready for application of another coat if needed

Summary After the conversion process CorroCrush can be left as a topcoat or any other topcoat can be applied after Solvent based topcoats needs to be applied 24 hours after CorroCrush has been applied When Heavy-duty protection is needed in very humid conditions it is recommended to apply a coat of CorroCrush EpoZin for extra protection For any extra information see product write-up or send queries to cj.carbontech@gmail.com or 082 803 4763 Thank You