Screen Management System

4K video processing for your installation There’s a growing demand for extremely high-resolution, high performance display technology for todays video-based installations. \

Switching terms explained Matrix Switcher Scaler / Converter Composition 1 2 3 LIVE Routing which input signal(s) go to which output signal(s) – without any scaling nor conversion Converting one signal to another type, and/or adjusting the resolution or frequency Using an AUX destination with E2, S3-4k, or standard outputs with ImagePro-4k Integrated scaling and switching to enable seamless live switching Using E2 or S3-4k to combine sources using native backgrounds and layered PiPs

Smart Solutions Barco is a reliable partner for all your projects Build to Order State-of-the-art Reliable Modular Scalable “Build to Order” configurations to support a wide variety of project configurations Industry leading “Athena” scaling without comprimising signal quality and latency Ruggedized engineering that is built for mission critical projects with 24/7 uptime Modular hardware design to enable easy repairs and future upgrades Comprehensive: Small switchers for Breakouts and meeting rooms like the PDS Simple switching or complex conversions with the ImagePRO Large complex shows with the Event Master processors depending on size. State of the Art: Latest generation of our proprietary scaling technology that only adds 1 frame of latency to locked systems with progressive signals. Full 4K@60p 4:4:4 scaling and signal processing. 12 bit per pixel scaling and signal back bone to provide the highest quality possible with extremely low latency. Reliable @ Live: Lowest latency processing for live signals, to keep lip sync issues at bay. Road worthy designs that are rigorously tested for impact, vibration, and temperature extremes. Future Proof: Input, output, and processing cards are modular so that the system can grow and evolve as your shows do. The software is continually evolving to provide new features and functionality. As new signal interfaces become available, new cards will be built to support them.

When is low latency important whenever there is real-time interaction with the video content Cameras in the Venue Gaming (eSports) Video Conferencing Remote Control (KVM)

Why is 12bit 444 color processing important Unsmooth color gradient 12 bit 4:4:4 8bit 4:2:0 Jagged Edges

Why is fast & seamless switching important Source “A” 2-5secs in Black Source “B” Source “A” Source “B” Noise and/or Loss of Sync

Purpose built Hotel & Casino Worship Broadcast Government Automotive Stadium & Arena Visitor Attraction Broadcast Government Higher Education Automotive Corporate

Auditoriums, Experience Centers, and Training Rooms Corporate Auditoriums, Experience Centers, and Training Rooms

Unisee and LED Videowalls Corporate Lobby Unisee and LED Videowalls

Auditorium Lecture Halls Higher Education Auditorium Lecture Halls

Broadcast Studio Backdrops

Large Arena & Auditorium Large Venue & Arenas LED Walls and Scoreboards

E2, S3 and Ex

Barco Screen Management System S3 and E2 Modular Frame / Card Architecture Up to 4x 4k60 Canvas using a single chassis Up to 16HD or 4x 4k layered windows Up to 2x 4k60 Canvas using a single chassis Up to 8x HD or 2x 4K layered windows Input Section Output Section Expansion Genlock Input Section Output Section Expansion Genlock

E2 Junior Configuration Contains one bank of four VPU cards: Up to 4 links of canvas & 16 SL single layers Input Section Output Section Multiviewer Redundant Power Supplies Network and Genlock Multi-Viewer must be HDMI 1.4 Output Card CARDS ARE NOT HOT SWAPPABLE

S3 Junior Configuration Contains one bank w/ one VPU card: Up to 4 links of canvas & 4 SL single layers VPU Input Section Output Section Multiviewer Single Power Supply Network and Genlock Multi-Viewer must be HDMI 1.4 Output Card CARDS ARE NOT HOT SWAPPABLE

Mention that you do not have to have both card slots available Ex Frame I/O slot Ex rear photo coming soon Links Network and Genlock I/O slot Power Supply Mention that you do not have to have both card slots available Cover these topics: Linking to an E2/S3, you can use any “Link Port” When linking to an Ex you must use “bottom” link port On an E2 you can have a max. of 8 Ex frames On a S3 you can have a max. of 4 Ex frames In standalone mode, you can link 2 Ex units together Linking to E2 you can have up to 32 inputs and 32 outputs Linking to S3 you can have up to 16 inputs and 16 outputs Standalone mode is a max. of 2 frames that can be populated in any configuration of I/O cards. 8 inputs/8 outputs, 12 inputs/4 outputs, or 4 inputs/12 outputs

E2 Factory Pre-configured Systems E2 Standard R9004698 E2 Jr R9004777 E2 Tri Combo R9004789 All prior factory configured models are still available as well as Build To Order (BTO) systems

S3-4k Factory Pre-configured Systems S3-4k R9004757 S3-4K Tri Combo R9004788 S3 Jr R9004778 S3 Standalone R9004794 All prior factory configured models are still available as well as Build To Order (BTO) systems

Gen1 4k@30 Input and Output Cards HDMI 1.4, DisplayPort 1.1, and 3G SDI 4K/UHD @30Hz on a single cable 4K/UHD via Quad SDI or 2Si SDI formats. Input EDID for VESA, CEA, or custom timings HDCP 1.4 compliant. Custom Area of Interest (output) 4K aux scaler or up to 4 HD aux scalers (output) HDMI 1.4/DP1.1 input 3G SDI input 3G SDI output HDMI 1.4 output #NoBarcoNoShow

Gen2 4k@60 Input and Output Cards HDMI 2.0, DisplayPort 1.2, 12/6/3G SDI 4K/UHD @60Hz on a single cable 4K/UHD via Quad SDI or 2Si SDI formats. 8/10bit per color 4:4:4 Input EDID for VESA, CEA, or custom timings HDCP 1.4 and 2.2 compliant. Custom Area of Interest (output) Output Rotation Splitter mode for output connectors Dual 4K aux scalers or up to 6 HD aux scalers 2x 4K input or output per card when inserted into dual capacity slots DisplayPort 1.2 input card HDMI 2.0 input card 4K60 Tri-combo input card DisplayPort 1.2 output card HDMI 2.0 output card 4K60 Tri-combo output card #NoBarcoNoShow

Custom Build to Order (BTO) Can’t find an off-the-shelf model? Specify your exact system requirements with a built-to- order (BTO) processor. BTO enables you to:   Choose the layer capacity and number of pips/keys Decide whether you will link or not Select your input/output mix

Large Venue Use Case

Corporate LED Wall Use Case

Barco Screen Management Systems Output Types Auxiliary Destination (Scaled Output) 1 2 Screen Destinations (Composition) Output Section 3 Multiviewer

Event Master Processors with Version 6. 0 Gen 1 vs Event Master Processors with Version 6.0 Gen 1 vs. Gen 2 Cards – 4K input and output signals Generation 2 I/O cards support up to two 4K60 signals when installed in the slots outlined below in red Support one 4K60 in any of the input slots outlined below in orange E2 Chassis S3 Chassis Ex Chassis

Barco Screen Management System E2 and S3 Connector Capacity 12x 4K IN (connectors) 8x 4K OUT (connectors) 5x 4K IN (connectors) 6x 4K OUT (connectors) Expansion Input Section Output Section Expansion VPU Input Section Output Section Genlock Genlock

Barco Screen Management System E2 and S3 Canvas and Layer Capacity @ 60Hz 16x HD Layers 4x 4k60 Canvas 8x HD Layers 2x 4k60 Canvas Expansion Input Section Output Section Expansion VPU Input Section Output Section Genlock Genlock

Barco Screen Management Systems Input Types An input can be defined as: ‘Background” ‘Source’ for either Screen or Aux Destination Background: Always Layer 0 Native Canvas Resolution Multiple inputs can be combined to create 1 widescreen (multi-channel) background` Layers (PiPs): Uses a scaler to resize the source Layered on top of background Can can be resized, positioned, and decorated Can be defined by a single input or a combination of mulitple inputs

Scaling Layers – Mix Layers Vs Single Layers Two scalers bound together in mixing mode for input A/B crossfading on PGM A Screen Destination must have at least one mix layer for PiPs to mix between inputs of different resolutions Always a channel available in PVW Can always transition seamlessly Preset recall to PVW will not cause resource conflicts with the following: Source Change Layer Effect Border Adjustment Shadow Adjustment During transition from PVW to PGM, sources are cross dissolved on PGM at the same time. This gives the look of a seamless transition. Two builds – one for preset recall, one for transition

Scaling Layers – Mix Layers Vs Single Layers Single scaler (More of these available in System) Cannot seamlessly transition If layer exists on PGM, changing source in PVW causes a resource conflict Cannot manually change anything in PVW if PGM is Locked Preset recall to PVW creates resource conflicts if layer is on Locked PGM Source Change Layer Effect Border Adjustment Shadow Adjustment Preset Conflict Resolution Modes: Force Recall Change Locked PGM (Glitchy Looking) Auto (Default Mode) Preset recall will remove layer from Locked PGM until Operator performs transition User Confirm Pop-Up Dialog with choices for Operator Off No Change; Error Pops up requiring user interaction Animation shows Automatic (default) conflict resolution: Two builds – one for preset recall, one for transition Unlocked PGM has same effect as “Force Recall”

Process up to (2) 4k canvas and (8) non mixing layers VPU S3 Canvas & Layers (2) VPU Cards Process up to (2) 4k canvas and (8) non mixing layers 2x2 3x3 4x2 HD Non mixing Layers (8) HD Layers (8) HD Layers (4) HD Layers 4k non mixing Layers (2) 4k Layers (2) 4k Layers (1) 4k Layers

Processes up to (2) 4k canvas and (16) non mixing layers E2 Canvas & Layers (4) VPUs BANK A Reserved BANK B Mother Board (8) VPU Cards Processes up to (2) 4k canvas and (16) non mixing layers 3x3 4x3 4x4 (16) HD Non mixing Layers (4) 4k non mixing Layers

Up to (8) HD PiPs S3-4k 2x 4k @ 60Hz canvas support Input Section Output Section Expansion Genlock VPU Up to (8) HD PiPs

to expand I/O, canvas or layers S3-4k + Ex 4x 4k @ 30Hz canvas support Link an EX to expand I/O, canvas or layers Input Section Output Section Expansion Genlock VPU I/O slot Power Supply Links

Input Section Up to (16) HD PiPs E2 4x 4k @ 60Hz canvas support Output Section Expansion Genlock Up to (16) HD PiPs

Super Aux Feature No canvas or layer limitations – Simply add inputs and outputs Input Sources 4k@30 or less Super Auxiliary Destination Picture and Picture

Mixing modes : Terminology Program (PGM) is the on-screen output Preview (PVW) is the preview of a layout before transitioning on-screen (PGM) Single Layer : Layer without Preview where the layer does not have “A-B” mixing capability May create resource conflicts if layer is already on screen (PGM) Cannot transition seamlessly, must “dip to black” Doubles the number of layers that can be shown simultaneous Mixing Layer Layer that performs a transition from preview to on-screen (PGM)

Genlock – Synchronize the inputs Prevent tearing by using Genlock to synchronize multiple video signals from one or more media servers

Barco Screen Management Keying TITLE TITLE Keying a source allows part of the picture to be rendered transparent, permitting you to “see through” to the content behind it. Commonly used for lower thirds title graphics over live camera or Logo insertion Keying is done in a layer Luma, Chroma and Cut + Fill (Linear) key types Luma Key Example TITLE TITLE Chroma Key Example Cut + Fill MUST use a mixer as it uses one half for cut source, the other half for fill source. Cut + Fill Key Example

Screen Management Systems Linking units together doubles the resources Links Up to 8 units Up to 320MP canvas Share 48xHD/12x4k Inputs Expansion Card

Take Control in 3 easy steps

Take Control in 3 easy steps

Take Control in 3 easy steps

Crestron Driver support Free Crestron Driver available on the Crestron App Store Fully functional sample application Leveraging Barco’s open protocol using JSON-RPC

Ex Expansion simplified Affordable stand alone scaler or Expand E2 and S3-4K capability Features: Scales and converts signals up to 4K@60p Scales and converts up to 4x HD signals Adds up to 32x HD inputs and 32x outputs to the E2 Adds up to 16x HD inputs and 16x outputs to the S3-4K Double the layers/mixers in your S3-4k Extends signals via fiber 100+ meters away Link up to 8x Ex with E2 or 4x Ex with S3 Compatible with E2 and S3-4K cards

Mention that you do not have to have both card slots available Ex Frame I/O slot Ex rear photo coming soon Links Network and Genlock I/O slot Power Supply Mention that you do not have to have both card slots available Cover these topics: Linking to an E2/S3, you can use any “Link Port” When linking to an Ex you must use “bottom” link port On an E2 you can have a max. of 8 Ex frames On a S3 you can have a max. of 4 Ex frames In standalone mode, you can link 2 Ex units together Linking to E2 you can have up to 32 inputs and 32 outputs Linking to S3 you can have up to 16 inputs and 16 outputs Standalone mode is a max. of 2 frames that can be populated in any configuration of I/O cards. 8 inputs/8 outputs, 12 inputs/4 outputs, or 4 inputs/12 outputs

Ex Standalone LED Walls – Different AOI on each output, same or different inputs or .png stills Up to six SL outputs on a TCO Create and recall presets Mention multiple options to “adapt” content to LED wall(s). Scaling mode and source adjustments with software

Full control at your fingertip[ EC30, EC-50 and EC-210 Finger-tip control 36 user-programmable buttons with customizable LCD displays and multi-page selection High-resolution T-bar for manual transitions 8 dedicated layer selection buttons with multi-page selection and dedicated BG layer button 12 user-definable destination buttons with multi-page selection

Training videos available on YouTube https://www.youtube.com/user/BarcoFolsomIP Short informative segments based on specific tasks

Example of how image can be used – find the right image in the DAM | youtube.com/BarcoTV | linkedin.com/company/Barco | twitter.com/Barco | facebook.com/Barco Example of how image can be used – find the right image in the DAM 52