Compass Constructions
Copying A Segment
Step #1: Start with the original segment
Step #2: Using a straightedge, draw a line that is longer than the original segment
Step #3: Place the needle of the compass on point A and the pencil on point B
Step #4: Transfer the distance to the drawn line, making an arc
Step #5: Label the new points A’ and B’. Then erase the excess line.
Bisecting a Segment
Step #1: Place the needle of the compass on point B and the pencil on a point about 3/4 across the segment
Make a semi-circle
Step #2: Maintaining the same distance on your compass, repeat step #1 from point A
Step #3: Label the points of intersection of the semi-circles points C and D
Step #4: Using a straightedge connect points C and D
is the perpendicular bisector of