DENON TU-604CI 6 zone expandable multi tuner Ask if there are questions and refer to the support dide on www, escient Europe.com Thank them for their time
DENON TU-604CI Key Features 6 independent tuner possibility 2 build in FM/AM Tuners 4 Expansion slots for Additional FM/AM or DAB tuners Independent triggers + master trigger Web interface for setup and remote assistance Ip/RS232 control with easy to understand RS232 protocol
DENON TU-604CI Front panel Shift button Tuner on/off indicator Tuner select Tuning buttons Display With remote sensor Memory button Display Dimmer Mode button RDS PT PTY buttons Return/ Status button Power button + Indicator Tuner Module on/off selection Function buttons Setup button Band mode button Jog dail/ Push to select
DENON TU-604CI Back Panel Tuner module Independent Tuner module Build in FM/AM tuner DAB/FM-AM Tuner Expansion slots RS232port Ethernet port Tuner module Independent Stereo line out Remote bus in/out 3.5mm jack Tuner module independent trigger 12v Master trigger
DENON TU-604CI Tuner modules FM/AM TUNER module Specification; Fm 87.5 – 108.00 MHz AM 522 – 1611 KHz Sensitivity FM 1.0 uV Sensitivity AM 18uV s/n Stereo 70dB F-type antenna connector Presets and line connectivity are on the TU-604 Ci for each module slot
DENON TU-604CI Tuner modules DAB TUNER module Specification; BandIII 174.928 – 239.200 MHz Band L 1452.960 – 1490.624 MHz Sensitivity band III -98dB Sensitivity band L -94 dB s/n Stereo 90dB F-type Antenna connector Presets and line connectivity are on the TU-604 Ci for each module slot
DENON TU-604CI Tuner module installation Power off the unit Un tighten the screws of the blind plates Take away the blind plates which cover the Tuner slots
DENON TU-604CI Tuner module installation Insert the tuner module into the Slots You can add DAB or FM/AM modules in any slot Fit the screws back to secure the modules. The modules are direct recognized
DENON TU-604CI Web Interface The Web interface can be accessed by entering the provided IP address of the router to the TU-604CI In the Internet explorer From here you have the ability to select between; - Unit control - Setup menu - Unit rename Default is the name of the module Slot
DENON TU-604CI Unit Control Use this page to control: -Power (ON/OFF) -Tuner (ON/OFF) -Tuner Band (FM/AM or DAB -Frequency -Memory Preset Select tuner (module) Select preset and frequency Display Select memory Via select tuner you can select the module you want to control
DENON TU-604CI Setup Menu Assign Preset banks to the Tuner modules
DENON TU-604CI Main Setup Select Tuner module to prepare for control. (FM/AM module or DAB) Tuner 1 and 2 are FM/AM build in
DENON TU-604CI Setup Menu Tuner Preset (A1 to G8) including: - Memory Preset number - Radio Band (FM/AM) - Frequency
DENON TU-604CI Option Setup Basic settings for the general control of the TU-604 CI: - Dimmer Level (Bright/Dim/Dark/OFF) - Remote ID (1/2/3/4) (set the remote code set for the module) - Remote Lock (ON/OFF) (to avoid remote control) Setup Lock (ON/OFF) (lock the unit to avoid changes) RS-232 Power (ON/OFF) ( Enables rs232 control from standby mode) - Firmware Update
DENON TU-604CI Unit rename Unit Rename Use this page to change the name of Each tuner modules in the unit. This is a useful tool to identify the tuner modules in a project
DENON TU-604CI Save & Load Save / Load Use this pages to save your settings and to restore in case of accidental erasing. You can also upload settings in another TU-604CI Your projects are stored in your computer.
DENON TU-604CI 6 zone expandable multi tuner RS232 control Straight connection Pin1: GND, Pin2: TxD, Pin3: RxD, Pin5: Common (GND) Settings: Communication Speed : 9600bps Character Length : 8 bits Parity Control : None Start Bit : 1 bit Stop Bit : 1 bit Example: STMS*ANFM<CR> : Select analog tuner FM band TPS*ANUP<CR> : Select tuner preset one position up TMS*ANMANUAL<CR> : Tuning frequency manual mode. The complete RS232 protocol files are downloadable on the Denon web site: TU-604CI http://www.usa.denon.com/TU604CI-IRCodes_V01.pdf