Irrigation – Garden – Plumbing - Lighting Garden Club Dripping Systems

An introduction to Holman Irrigation Export Internationally through DIG and K-Rain to Home Depot 50 Years Young G Garden Decor 3 Offices Perth, Melbourne, Brisbane Australian Family Owned P Plumbing 4 Warehouses Perth, Melbourne, Brisbane, Sydney Designed & Engineered in Australia 140 + Employees

Drippers Saving water Saving soil Saving herbicides Saving environment

nETAFIM Pressure compensating drippers installed inside the tube Water remains in tube after shut-down. No need for Air release valve Other drippers can be added as required

Flushing valve Allows water to flush dirt and ants out of the line every start-up Avoids common and repeated blockage Install at the end of the line with an elbow attachment

Air release valve Allows air to enter the line when water is switched off Avoids drippers sucking in dirt and debris Install at highest point of line

Anchor securely to base Pressure reducer From 8 bars to 2 bars With filter attached Anchor securely to base

Choose your dripper Drippers – add water to immediate area Shrubblers – add water to a small area with large droplet size, meaning there is little misting or evaporation Spray heads – spread water over a larger area (1m radius approx.) Risers – lift watering above surrounding foliage and debris to ensure even spread of water

Be sure to use the right tools

Bottle drippers Great for pot plants Fully adjustable

Timers

Grip ‘n’ lock Fittings No more drips, leaks, blow-offs - If you are going to leave a tap on to service a timer or dripper, you need to ensure you have reliable connectors Barbed insert is longer and gains better grip Blue collar set to indent the hose against insert (attach to hose BEFORE fitting) Blue o-ring on Tap fitting seals from leaks (replace as needed)

THANK YOU