Acceleration analysis (Chapter 4) Objective: Compute accelerations (linear and angular) of all components of a mechanism Visit for more Learning Resources

Outline Definition of acceleration (4.1, 4.2) Acceleration analysis using relative acceleration equations for points on same link (4.3) Acceleration on points on same link Graphical acceleration analysis Algebraic acceleration analysis General approach for acceleration analysis (4.5) Coriolis acceleration Application Rolling acceleration

Definition of acceleration (4.1, 4.2) Angular = = rate of change in angular velocity Linear = A = rate of change in linear velocity (Note: a vector will be denoted by either a bold character or using an arrow above the character)

Acceleration of link in pure rotation (4.3) AtPA P APA Length of link: p AnPA ,   A Magnitude of tangential component = p, magnitude of normal component = p 2

Acceleration of link, general case AtPA P APA Length of link: p AnPA ,   AnPA AtPA A AP APA AA AA AP=AA+APA

Graphical acceleration analysis Four-bar linkage example (example 4.1) AtBA B AtB 3 A AtA Clockwise acceleration of crank 4 2 AnA 1

Problem definition: given the positions of the links, their angular velocities and the acceleration of the input link (link 2), find the linear accelerations of A and B and the angular accelerations of links 2 and 3. Solution: Find velocity of A Solve graphically equation: Find the angular accelerations of links 3 and 4

Graphical solution of equation AB=AA+ABA AtB AtBA 2 3 4 1 AtA AnA B A AtB AA AtBA AnBA -AnB Steps: Draw AA, AnBA, -AtBA Draw line normal to link 3 starting from tip of –AnB Draw line normal to link 4 starting from origin of AA Find intersection and draw AtB and AtBA.

Guidelines Start from the link for which you have most information Find the accelerations of its points Continue with the next link, formulate and solve equation: acceleration of one end = acceleration of other end + acceleration difference We always know the normal components of the acceleration of a point if we know the angular velocity of the link on which it lies We always know the direction of the tangential components of the acceleration

Algebraic acceleration analysis (4.10) 2 3 4 1 B A a b c R4 R2 R1 1 Given: dimensions, positions, and velocities of links and angular acceleration of crank, find angular accelerations of coupler and rocker and linear accelerations of nodes A and B

Loop equation Differentiate twice: This equation means:

Solution

General approach for acceleration analysis (4.5) P, P’ (colocated points at some instant), P on slider, P’ on bar Acceleration of P = Acceleration of P’ + Acceleration of P seen from observer moving with rod+Coriolis acceleration of P’

Coriolis acceleration Whenever a point is moving on a path and the path is rotating, there is an extra component of the acceleration due to coupling between the motion of the point on the path and the rotation of the path. This component is called Coriolis acceleration.

Coriolis acceleration APslip: acceleration of P as seen by observer moving with rod VPslip P APcoriolis AP’n AP’t APslip O AP

Coriolis acceleration Coriolis acceleration=2Vslip Coriolis acceleration is normal to the radius, OP, and it points towards the left of an observer moving with the slider if rotation is counterclockwise. If the rotation is clockwise it points to the right. To find the acceleration of a point, P, moving on a rotating path: Consider a point, P’, that is fixed on the path and coincides with P at a particular instant. Find the acceleration of P’, and add the slip acceleration of P and the Coriolis acceleration of P. AP=acceleration of P’+acceleration of P seen from observer moving with rod+Coriolis acceleration=AP’+APslip+APCoriolis

Application: crank-slider mechanism B2 on link 2 B3 on link 3 These points coincide at the instant when the mechanism is shown. When 2=0, a=d-b Unknown quantities marked in blue . B2, B3 normal to crank Link 2, a 3, 3, 3 2, 2 2 O2 Link 3, b d

General approach for kinematic analysis Represent links with vectors. Use complex numbers. Write loop equation. Solve equation for position analysis Differentiate loop equation once and solve it for velocity analysis Differentiate loop equation again and solve it for acceleration analysis

Position analysis Make sure you consider the correct quadrant for 3

Velocity analysis VB3= VB2+ VB3B2 VB3B2 // crank VB3 ┴ B2 on crank, rocker B2 on crank, B3, on slider . crank rocker VB2 ┴ crank O2

Velocity analysis is the relative velocity of B3 w.r.t. B2

Acceleration analysis Where:

Relation between accelerations of B2 (on crank) and B3 (on slider) AB3slip // crank AB3 Crank . B2, B3 AB3Coriolis ┴ crank AB2 Rocker

Rolling acceleration (4.7) First assume that angular acceleration, , is zero O  O  R  (absolute) C  (absolute) C r P No slip condition: VP=0

Find accelerations of C and P -(R-r)/r (Negative sign means that CCW rotation around center of big circle, O, results in CW rotation of disk around its own center) VC= (R-r) (Normal to radius OC) AnC=VC2/(R-r) (directed toward the center O) AnP=VC2/(R-r)+ VC2 /r (also directed toward the center O) Tangential components of acceleration of C and P are zero

Summary of results R AC, length VC2/(R-r) C VC, length (R-r) r AP, length VC2/(R-r)+ VC2 /r P VP=0

Inverse curvature  (R+r)/r VC=(R+r) (normal to OC) AnC=VC2/(R+r) (directed toward the center O) AnP=VC2/r - VC2 /(R+r) (directed away from the center O) Tangential components of acceleration are zero

Inverse curvature: Summary of results VC, length (R+r) C r AC, length VC2/(R+r) P VP=0 R AP, length VC2 /r -VC2/(R+r)

Now consider nonzero angular acceleration, 0 The results for zero angular acceleration are still correct, but ACt=r (normal to OC) APt is still zero These results are valid for both types of curvature For more detail contact us