Job Performance Requirement 10-15 Flat Load

A A water supply flat load starts with the male end of the hose on the right side of the bed at the rear. This will allow this hose load to be connected to another hose load for long hose lays. JPR 10-15A

B The hose is laid flat until the front is reached where the hose is folded over and brought to the rear. When back at the rear, turn the hose off the first layer and lay it flat next to the first row. JPR 10-15B

C When the edge of the hose bed is reached, a second layer is started with a double layer, moving back to the right side of the bed. JPR 10-15C

D An appliance, such as a ball valve, can be placed on the female end on top of the load. JPR 10-15D