N vs. E 0.25mip threshold roughcut for SLAC 2/24/2019
Single Particle E Resolution Non-projective geometry roughcut for SLAC 2/24/2019
Digital vs. Analog roughcut for SLAC 2/24/2019
Multiple thresholds roughcut for SLAC 2/24/2019
ZZ Events Stable MC particles roughcut for SLAC 2/24/2019
Recipe Energy Smearing Jet Reconstruction Fit s as a function of incident E (slide5) and smear neutral hadrons accordingly g ~ 17%/sqrt(E), generated E for charged hadrons Jet Reconstruction pT order stable MC particles (ignoring neutrinos) start with highest pT particle and cluster in 0.7 cone repeat for remaining particles roughcut for SLAC 2/24/2019
Energy Fractions Neutral hadron fraction g fraction roughcut for SLAC 2/24/2019
Jet E Resolution rms used roughcut for SLAC 2/24/2019
Layer Stack roughcut for SLAC 2/24/2019
Cosmic Data with PMT ~11 p.e roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
Si-PM’s roughcut for SLAC 2/24/2019
Cosmic Data with Si-PM roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
Cosmic with APD Hamamatsu S8550 roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
MRS Signal roughcut for SLAC 2/24/2019
Cosmics with MRS roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
roughcut for SLAC 2/24/2019
Current Pulse roughcut for SLAC 2/24/2019
Surface Treatment/Wrapping UNPOLISHED TOP AND POLISHED BOTTOM POLISHED TOP AND UNPOLISHED BOTTOM 0.98 1.00 1.02 Tyvek Paint VM 2002 Mylar CM590 CM500 Alum Foil 1.00 0.89 1.08 0.83 0.28 0.44 0.63 roughcut for SLAC 2/24/2019
Spray It On Titanium white acrylic roughcut for SLAC 2/24/2019
Quantifying Paint roughcut for SLAC 2/24/2019
Miscellaneous Measurements 6cm2/9cm2 Straight/Sigma Square/Hex Extruded/Cast 0.95 0.94 0.7 NICADD scintillator 1mm round Kurray After/Before glue EJ500/BC600 (optical glues) Y11/BCF92 1.15 1.0 3.1 0.8 mm square Bicron roughcut for SLAC 2/24/2019
Miscellaneous Measurements Groove Area Response Hexagon Sigma 9.4 1895.3 Square 1665.8 6 1740.5 1743.8 2015.9 Straight 1523.4 4 1618.6 861.5 900.9 1089.4 roughcut for SLAC 2/24/2019
Uniformity Measurements roughcut for SLAC 2/24/2019
Uniformity Measurements roughcut for SLAC 2/24/2019
Response vs. Thickness roughcut for SLAC 2/24/2019
MEPHI-ITEP-DESY Solution Can the cost be further reduced? roughcut for SLAC 2/24/2019
Thickness Tolerances ELJEN cast NICADD extruded roughcut for SLAC 2/24/2019
Response Dispersion roughcut for SLAC 2/24/2019