HBr, dep. Calc. E0,Vm+4,Vm+5 https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/PPT-290812ak.ppt
D1(z-axis) Points for 0 < D1 < 0.001 -for W2 £ W3 W3 W2 https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/PXP-290812ak.pxp; Lay:0,Gr:1; “Image plot”; “spectrum”
D1(z-axis/out of plane axis) W3 Points for 0 < D1 < 0.001 -for W2 £ W3 W2 https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/PXP-290812ak.pxp; Lay:1,Gr:0 ; Contour plot
B1 (z-axis) Points for 0 < D1 < 0.001 -for W2 £ W3 W3 W2 https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/PXP-290812ak.pxp; Lay:3,Gr:3 ; Image plot
B1(z-axis) B1 = 8.84; W2 = 64, W3 = 100 Points for 0 < D1 < 0.001 -for W2 £ W3 W2=49,W3=78, B1=8.41,D1=0.002 from Deperturb. fit analysis: https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/Deperturbed%20E0%20state%20HBr.doc W3 Region close that obtained from “IR” analysis / See next slide W2 Unrealistic Region(?) https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/PXP-290812ak.pxp; Lay:2,Gr:2 ; Contour plot
NB!: Let´s search the area W3 > 100 and 70 > W2 > 60 Comments: NB!: Let´s search the area W3 > 100 and 70 > W2 > 60 Judging from the figs. above the W´s must be far away from DEJ´ /2 (=Wmax)values(?): Is that the case? based on https://notendur.hi.is/agust/rannsoknir/rempi/hbr/July12/Deperturbed%20E0%20state%20HBr.doc => W2 = 20.6 – 20.8 and W3 = 48 – 54 cm-1 Judging from the plots above these W´s should give 0 < D1 < 0.001 !! and B1 = 7.93- 7.94 !