Pretraživanje interneta Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

Otvoriti pretraživač; Pronaći forum o računarima; Otvoriti Word dokument; Podesiti stranicu; Napisati ili kopirati dio zanimljivog teksta sa foruma. Pronaći sliku na internetu; Snimiti je; Obraditi u programu; Ubaciti u Word dokumentu; Snimiti Word dokument; Poslati prijatelju dokument kao e-mail. Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.