Perel Latvia SIA Sveicināti! Jauni produkti 2008

Perel Latvia SIA Metrel Sprieguma & nepārtrauktības testeri MD1000MD1100 LED modelis LCD modelis CAT IV 1000V 3 gadu garantija RCD nostrādes tests IP65

Perel Latvia SIA Tehniskā specifikācija MD 1000-LED Pamata raksturojums Sprieguma tests - 12 V ÷ 690 V Automātiska AC/DC pazīšana Nepārtrauktības tests līdz 500 kΩ Fāzes & griežlauka tests RCD nostrādes tests Diožu tests Gaismas diožu displejs MD 1100-LCD Pamata raksturojums Sprieguma tests - 12 V ÷ 690 V Automātiska AC/DC pazīšana Nepārtrauktības tests līdz 2000 Ω Fāzes & griežlauka tests RCD nostrādes tests Diožu tests Auto Power Off Data Hold Apgaismojams šķidro kristālu displejs

Perel Latvia SIA Metrel MI-3101 EurotestAT Fast measurement using AUTO SEGUENCY Simple to use Standardized test report Automatically detects possible hazardous measurement

Perel Latvia SIA Metrel MI-3101 EurotestAT AUTO SEQUENCE ® - Enhanced test performance, patented by Metrel – one programmable procedure with several Single Tests in sequence. Clearly visible information on big 320x240 dots matrix display with backlight. Locator function enables tracing fuses, lines and faults. (like MI-2093 cable tester) Date and time, related to each saved result. On-line voltage monitor shows voltage levels for L-L, L-N and L-PE during the measurement. Fast, reliable and accurate Loop L-PE resistance measurement without RCD tripping. Built-in Fuse characteristics database for quick evaluation of measuring results at LINE/LOOP impedance testing. Field-proven Earth resistance measuring method which eliminates stray earth currents during the measurement. TN/TT/IT Earthing System support. Multi-functional schuko Plug commander for faster execution of a measuring sequence. Built-in internal memory with professionally organized structure with up to 2000 locations. QUERTY keypad for creating names in installation's structure.

Perel Latvia SIA Metrel MI-3101 EurotestAT Help menu with connection diagrams and short descriptions for all available functions Continuity test uses N and PE wires for measurements to enable N-PE Continuity verification on live installation through schuko-plug. This means Auto sequence neednt be interrupted to switch mains off.

Perel Latvia SIA Metrel MI-3101 EurotestAT Automatic measurement of installation resistance between all three wire pairs: L-N, L-PE and N-PE up to 1 Gohm. Test voltages: 50V, 100V, 250V, 500V or 1000V Two-point and three-point earth resistance measurement.

Perel Latvia SIA Metrel MI-3101 EurotestAT Complete RCD analysis also in automatic 6-steps RCD By providing various test current 10mA 1000mA. Multipliers ½ I to 5*I, Current polarities and shapes, (sin AC, pulsed A, general G and selective S) Precise measurements of L-N and L-L line impedance in wide voltage range. 30V 440V Measures also in RCD protected line with RCD trip lock function. Extensive fuse characteristics database with built-in limit values.

Perel Latvia SIA Metrel MI-3101 EurotestAT Qwerty keypad on screen !! Create test report quickly !! Both USB and RS232 Insert our personal remarks simply drop & drag interface

Perel Latvia SIA Metrel MI-3101 EurotestAT Standard set Instrument, carrying bag + belt, test tips 3pcs, alligator clips, plug commander, USB cable, test cable, power adapter + NiMH cells, instruction manual long + short, conformity declaration, production verification data, PC SW Euro link-lite. Optional Accessories Tip commander, earth set 20m, fast cells, charger for 12 cell, probe lead, earth set 50m, three phase cable, three phase adapter, selective probe, receiver, PC SW Euro link pro

Perel Latvia SIA Multi M700 & M730 Noplūdes strāvu mērītājs FEATURES High Sensitive for Low Range Leakage Current Suitable for Measurement of 4-20mA DC Controlled Circuit DC mV Analog Signal Output Lowest Influence from Magnetization & Terrestrial Magnetism Wide Measuring Ranges - up to DC 1000mA & AC 10A M700 & M730 M700 M730

Perel Latvia SIA Multi M700 & M730 Specifikācija Measuring function : AC/DC current Safety Standard : IEC CAT 600V or CAT 300V Measuring method : Clamp CT M730 (Slid/Hook Type M700) Jaw opening capability : 5mm φ M700 ; 30 mm φ M730 Measuring ranges : DC 100mA/1000mA, AC 100mA/1000mA/10A (45Hz 65Hz) Display : Max count on LCD Zero adjustment : For DC current range, by "0 ADJ" switch Signal Output : DC 100mV full scale to each range Circuit voltage : less than AC/DC 500V Auto power off : Approx. 10 minutes Consumption Current : Approx. 9mA (approx. 200h for continuous use) Accessories : Soft Case, Batteries, Instruction Manual

Perel Latvia SIA Paldies!