slider qty (Each part) Client: Gadi Gate type: Model: submarine gate Model: NO. of gate (Each part) / Part name: back hanger panel Hot runner: Part No: Tool type: 2 plate mold General thickness Back:1.66MM Hanger:1.68MM Panel:1.37MM slider qty (Each part) Plastic material: ABS Lifter qty (Each part) Part weight: Back:40.1G Hanger:7.3G Panel:21.5G Shrinkage: 1.005 Cavities: 1+1+1 DFM by: James

panel hanger back

General layer

GATE SCHEME back Sub gate will to the ejector , please approve it。

Parting line back Parting line PL Cavity Core

cavity side mold structure back 4 pcs insert pin, please approve！ these 4 surface please add 0.5 degree to avoid the part stick cavity！

Core side mold structure back And these place we will add 12 insert pin, for the air issue.

Part’s ejection back 5mm ejector 4 pcs 6mm ejector 5 pcs Please approve it ！

Part’s thickness analysis back OK

Part’s change in cavity/core side back These two place please add 3 degree in cavity side with reducing resin, for this place is shut off. Please approve it ! The red surface is cavity side, the blue color is core side , the green no draft , so please add 1 degree draft in core side with reducing resin. The red surface is cavity side, the blue color is core side , the green no draft , so please add 1 degree draft in cavity side with reducing resin.

GATE SCHEME panel Sub gate for ejector, please approve it.

Parting line PL Cavity Core

Part’s ejection panel 3.0mm ejector 16 pcs, please approve it.

Core side mold structure panel And these place we will add 12 insert pin, for the air issue.

Part’s thickness analysis panel OK ！

Part’s change in cavity/core side panel The red surface is cavity side, the blue color is core side , the green no draft , so please add 1 degree draft in cavity side and core side with reducing resin.

GATE SCHEME hanger Sub gate , please inform.

Parting line hanger PL Cavity Core

hanger Part’s ejection 4mm ejector 6 pcs, please approve.

Part’s thickness analysis hanger OK!

hanger Part’s change in cavity/core side The red surface is cavity side, the blue color is core side , the green no draft , so please add 1 degree draft in cavity side and core side with reducing resin.

hanger These red surface, please reduce width each side 0.2MM to make kiss off with cavity side and core side.。 For the mold construction, please delete these two hole, for this place if do kiss off or shut off will very easy to break, so please add resin to delete the two side hole.

Thank you !!!