Pressurized Reactor ME 462 Capstone Design Presented by: Rita Russell

Slides:

Advertisements

Similar presentations

Heat Exchanger Design Thermal / Fluid System Design Final Project Department of Mechanical Engineering Fall 2005 December 13, 2005 Team Members: Andrew.

Advertisements

Caskets Cap Openings.

MR Airway Pressure Device Group Members Laura Sheehan Kevin Johnson Jon Cappel Noelle Simatic Client Dr. Victor Haughton Advisor Prof. Mitch Tyler.

Ss Hefei, China July 19, 2011 Nuclear, Plasma, and Radiological Engineering Center for Plasma-Material Interactions Contact: Flowing.

An Apparatus for Optimizing Heat Exchange and Solution Mixing for Cryopreservation Experiments with 2D Tissue Systems: Temperature and Concentration Control.

Team 10, Catheter Wash System Problem TERUMO® Medical Corporation, manufactures medical catheters for use in arteries and veins These catheters must be.

History of Vacuum Research Corp. Vacuum Research Corporation (VRC) traces its history back almost 60 years. VRC was one of the pioneer companies in the.

Air Muscle Robotic Tiger P Presentation Agenda Specs and Customer Needs Concept Summary Design Summary System Testing Results Successes and Failures.

Vacuum Vessel Production Readiness Review

Drug Delivery & Tissue Engineering Laboratory

COMMERCIAL REFRIGERATION

M.E. 462 Capstone Design I.U.P.U.I. Spring 2007 Bishop Steering: 1970 Lotus Europa Front Axle Re-design Aaron Emmons Phil Palmer Brad Holtsclaw Adam Spindler.

Analyzing the Pneumatic Reservoir Building a Mathematical Model of The Interior Volume of the Reservoir.

Group 10 Anthony Muller Gerald Tyberghein Joshua Wood 1.

Multidisciplinary Engineering Senior Design Project 05xxx Project Name 2005 Critical Design Review May 13, 2001 Project Sponsor: Team Members: Team Mentor:

Capstone Design MAE 4980 Coordinator: Dr. A. Sherif El-Gizawy.

1 Infrastructure at RAL Iouri Ivaniouchenkov, RAL MICE Collaboration CERN, 29 March 2003.

Academic Advisor: Dr. Dave Turcic Team Members: Ron Pahle Khoa T. Tran Duc M. Le Thanh Q. Nguyen Shafi Alhajri Sponsoring Company: Edwards Vacuum Ltd.

XEROX DIGITAL PRINTING SYSTEM Brandon Romano Sang Jung Leon Dillard Kevin Forge.

“HEAR IT AND FORGET IT, SEE IT AND REMEMBER IT, DO IT AND UNDERSTAND IT” R12310: ME and ChemE Lab and Demo Hardware Development DPM – Spring 2012.

LARP QXF 150mm Structure Mike Anerella / John Cozzolino / Jesse Schmalzle November 15, nd Joint HiLumi LHC-LARP Annual Meeting.

Design Group: Wei-Yuan Chu Adrian Conrad Thomas Hylton Scott Jean Nicholas Metzger IUPUI Faculty Advisor: Dr. Jie Chen Rolls-Royce Advisor: Timothy Fuesting.

P13621: Conductive Heat Transfer Lab Equipment MSD II: Final Project Review 10 May, 2013 RIT KGCOE.

CHAPTER 6 Moving Heat: Heating and Air Conditioning Principles

CMS FPIX Cooling Prototype Phase One Estimate and Conceptual Design R. L. Schmitt 10/28/2009.

Shielding the Weiner PSU 7 May 2013 Kiril Marinov ASTeC, MaRS, DL 1.

ME 414 : Project 1 Heating System for NASA North Pole Project Team Members Alan Benedict Jeffrey Jones Laura O’Hair Aaron Randall May 5, 2006.

IV Tubing Organizer Blake Hondl, Amit Mehta, Ryan Pope, Kristen Sipsma, April Zehm, Katie Zenker BME 200/300 October 10, 2003.

1 CONCEPT GENERATION AND SELECTION SUMMARY Need Required functionality Concept 1 Concept 2 Concept 3 … Concept n QFD Functional Decomposition Morphological.

Magnetic Shielding Issues Roy Preece STFC - RAL. Overview Issues Items in harms way – Step IV Step IV mitigation plan –Racks –Compressors Current / Future.

COMPACT MOBILE LIFTING DEVICE Team 3 Michael Shaffer, Ken Kammerer, Dave Geesaman, Jin Ko Sponsor: Fraunhofer Advisor: Dr. Michael Keefe Innovative Lifting.

SC dipole magnet for CBM E.A.Matyushevskiy, P.G. Akishin, A.V. Alfeev, V.S. Alfeev, V.V. Ivanov, E.I. Litvinenko, A.I. Malakhov JINR, Dubna CBM Collaboration.

High Temperature Waste Pasteurizer Brian Kilger Kyle Cohn Kyle Weston Stephanie Mauro P13411.

ME 414 Thermal / Fluid System Design Heat Exchanger Project Professor: John Toksoy 12/13/05 Team Members: Chester Bennett Wilton Green Scott Guttman Nick.

1 Target Station Design Dan Wilcox High Power Targets Group, Rutherford Appleton Laboratory EuroNu Annual Meeting 2012.

Sponsor: Carrier Corporation Advisor: Dr. H. El-Mounayri May 3, 2007 Design Team: Mike Abel Braden Duffin Simon Marin Joe McGuire.

Project 2: Heat Exchanger Design Group Members: Brian Schludecker Phillip Palmer Adam Spindler Mike Hay Joe McGuire Presented 12/12/2006 to Dr. Toksoy.

High Speed Vessel Fendering System Design Presenters: Cameron Clark Dave Maharaj Okason Morrison Jean-Pierre Njante Alexandra Ortiz Advisor: Prof. Sadegh.

1 Target Station Design for Neutrino Superbeams Dan Wilcox High Power Targets Group, Rutherford Appleton Laboratory NBI 2012, CERN.

Beaker A beaker is a simple container for stirring, mixing and heating liquids.

The Operation of the Tevatron Vacuum system Authors David Augustine Alex Chen Scott McCormick 1.

Laparoscopic Banding Device Client: Dr. Thomas M. Julian, M.D. Advisor: Mitch Tyler Leader/BSAC: Gina Stuessy BWIG: Kailey Feyereisen Communications: Anna.

SC Project Review of NCSX, April 8-10, 2008 NCSX Cryogenics Systems WBS-62 Steve Raftopoulos NCSX Cryogenic Systems WBS(62) Manager.

Kronlab Glass Columns high quality glass columns

Types of Bioreactors / Fermenters

Design of a Nulling Yaw Probe for a Gas Turbine Engine Test Rig

ATF2 Magnets ATF2 Magnets 14 Sep 2007Cherrill Spencer, SLAC. Cooling Solid Wire Sextupoles 1 Report of the effort to cool an old FFTB solid wire sextupole.

Table of Content Introduction of heat exchanger. Design of Coolers. Introduction of fixed bed reactors. Design of reactors.

ME444 ENGINEERING PIPING SYSTEM DESIGN CHAPTER 11: STEAM PIPING SYSTEM (1)

A WEIGHT EXCHANGE SYSTEM FOR AN ABSOLUTE PRESSURE BALANCE Authors: H. Kajastie, J. Manninen, M. Rantanen, K. Riski and S. Semenoja, Centre for Metrology.

Extra / Discussion Slides. 2 1.Helium Top Fill Port Add extra CF/ISO flange as collar so that the weld-region is not disturbed 2.Helium bottom FillCF.

Fixed Orifice Tube Cycling Clutch System (FOTCC)

Fixed Orifice Tube Cycling Clutch System (FOTCC)

Advisor: Dr. Shangchao Lin

NPDG Liquid Hydrogen Target: Design and Safety Features

Advisor: Dr. Shangchao Lin

Fixed Orifice Tube Cycling Clutch System (FOTCC)

Date of download: 10/9/2017 Copyright © ASME. All rights reserved.

Full Anode Insert Pressure Cycle Simulation Device

Update on He3 Services design since the ORNL meeting

HFM Test Station Main Cryostat

Improving Simulations in the Post Anesthesia Care Unit

Sarah Springborn Luisa Meyer BeomKang Huh Sarah Czaplewski

Chemical Solidification and Breakdown

Active Reciprocating Compressor Valve Assembly P16452

Working Under Pressure

Double Duty® -12.

The First Free-Vibration Mode of a Heat Exchanger Lid

Prototypes Prototypes are made to see if a product works before it goes into large scale production. Many things will be tested such as function, safety,

P18325: Automated Breast Pump Cleaning System (Team ABC’s)

Presentation transcript:

Pressurized Reactor ME 462 Capstone Design Presented by: Rita Russell Adam Schulte Shahid Osman Tiffany Urias

Objective To design an enclosed container to safely encase test tubes held in a reaction rack, be able to supply heat from an outside source, and provide a pressurized anaerobic environment while transmitting a magnetic field for stirring.

Design Specifications Exterior case with removable reaction tube rack Fixed size of tube rack; racks with different tubes interchange Thermo-stated case with heating 25-150 ºC Pressure range of 0-100 psig; vacuum desirable Non-magnetic for all materials used Stirring of contents via magnetic field through the case Minimize distance between tube rack bottom and the outside bottom Quality of the seal is critical for small scale runs (evaporation)

Gantt Chart

Terra Universal Acrylic Competitors Terra Universal SS Tupperware Terra Universal Acrylic Newco INDELCO vacuum device

QFD List of Customer Requirements Weighing of Customer Requirements List of Competitors Products List of Engineering Requirement Comparision of Competitors Products to Customer Requirements

QFD

Functional Decomposition

Conceptual Design

Concept: Flip Lid

Concept: File Drawer

Concept: Clam Shell

Concept: Sliding Lid

Decision Matrix

Final Concept: File Drawer

Specified Parts Thermo coil Stainless Steel 3-way Valve

Decided Parts Handles Latches Pressure Release Valve Thermocouple O-ring

ANSYS

Prototype

Improvements to Prototype Decreased Weight Decreased Thickness of Material Decreased Volume by 23 in3 Replaced Rails with Grooves and Pins Decreased Length of Thermo coils

ANSYS

Final Design Open

Final Design Closed

Exploded View Final Design

Acknowledgements Dr. Jie Chen (Advisor), Mr. Charles Alt and Mr. David Bradley (Eli Lilly), Mr. Bill Bell and Mr. Dean (The Tarpenning-LaFollette Co.), Mr. Tom Rich (L.T. Rich Products)

Questions and Comments ? Questions and Comments