Gurpreet Singh CSE/IT

Hardware Required Hub or Switch [depending on no. of comp. used] CAT 5 cable RJ45 connectors Crimper tool One network card for each computer The network socket on the back of your computer and network cable ,cable plug look like this Gurpreet Singh CSE/IT

Select the COMPUTER NAME tab Choose  START / MY COMPUTER / right click on the My Computer icon and choose PROPERTIES from the menu.   Select the COMPUTER NAME tab Select the CHANGE button Gurpreet Singh CSE/IT

In the Workgroup text box, type a workgroup name of your choice and click OK.  In the Computer Name text box, type a user name.....] . This name must be unique in the Network!  No Duplications of a Computer Name is allowed! Gurpreet Singh CSE/IT

Click OK at the bottom of this window Click OK at the bottom of this window.  A message box will appear, these changes will not take effect until the computer is restarted, Click OK.  After completing the above steps, restart the computer, come back to this location to verify that you have changed to this Workgroup. Gurpreet Singh CSE/IT

OR Go to Start by going to Control panel, open the Network Icon and click on the Identification tab. Gurpreet Singh CSE/IT

Click on Access Control tab, enable Share-level access control   Gurpreet Singh CSE/IT

Next click the Configuration tab and you should see the following. Gurpreet Singh CSE/IT

Now highlight TCP/IP for your NIC like in the picture below - then click the properties button. Gurpreet Singh CSE/IT

Select specify an IP address and enter the numbers exactly as they appear below. On the second machines use the same numbers except increment the last digit for each machine. Example the second machine would be 192.168.0.2 and a third machine would be 192.168.0.3 The subnet Mask stays the same for all machines and in this example we are using 255.255.255.0 Gurpreet Singh CSE/IT

Checking connection Open a DOS-Prompt window on the computer 192.168.0.1 and type ping 192.168.0.2 and you should see data returned showing the ping time between the two computers. Gurpreet Singh CSE/IT

Other computer in the Network only shows you the SHARED FOLDER. You should be able to see each computer by clicking on My Network Places from your desktop. To view other computers Folders and Files you must now share those items. Other computer in the Network only shows you the SHARED FOLDER. Gurpreet Singh CSE/IT

Steps to share folders and files Gurpreet Singh CSE/IT

Sharing files and folders Right click on the drive and select sharing and security The disk or folder that you share, along with all of the folders that it contains, will be accessible by other network users. Gurpreet Singh CSE/IT

The first time that you set up sharing, Windows XP displays a warning, urging you to use the Network Setup Wizard for safety. Click where indicated to either run the Wizard or to do it yourself Gurpreet Singh CSE/IT