New MB 500 GNSS OEM Board

Strong R&D: History of Innovation MB 500 Dual-Frequency GPS+GLONASS+SBAS with BLADE (2008) DG14 First L1 GPS+SBAS board with RTK (2002) G8 First L1 GPS board with carrier @ $125 (2001) GG12 First GPS+GLONASS FAA-Certifiable Board (1999) Z-Eurocard First Dual-Frequency GPS board under $10k (1998) GG24 First GPS+GLONASS board 1996 G12 First Ashtech OEM board (1996) Z-12 First Z-Tracking GPS receiver (1992) Good slide

Multi-constellation GNSS board Introducing MB 500 100 mm 80 mm Multi-constellation GNSS board L1 or L1/L2 (L2C) GPS+GLONASS+SBAS Up to Centimeter real-time accuracy

MB 500 Specifications Multi-constellation Dual Frequency GNSS Board: GPS L1 C/A L1/L2 P-code/L2C, L1/L2 full wavelength carrier GLONASS L1 C/A, L2 C/A or P-code, L1/L2 full wavelength carrier SBAS: code & carrier (WAAS/EGNOS/MSAS) Fully independent Code and Phase measurements Available from single frequency GPS+GLONASS version up to a full featured version by firmware key activation RTK Base RTCM-2.3: Types 1, 3, 9, 16, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 36 RTCM-3.1: Types 1001 to 1013 ,1019, 1020, 1029, 1033 CMR: Types 0, 1, 2, 3 ; CMR+: Type 0, 3 ATOM™ (Magellan Professional proprietary format) Moving base operation New

New MB 500 Specifications RTK Rover BLADE technology Up to 10 Hz Synchronized RTK & up to 20 Hz Fast RTK RTCM-2.3: Types 1, 3, 9, 16, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 36, 59 (FKP) RTCM-3.1: Types 1001 to 1017, 1019, 1020, 1029 to 1033 CMR: Types 0, 1, 2, 3 ; CMR+: Type 0, 3 ATOM, DBEN an LRK (Magellan Professional proprietary format) Networks: VRS, FKP, MAC RTK with moving base operation Heading and pitch or roll determination (against another board or sensor) New

MB 500 Environmental Specifications Operating Temp: -30°C to +70°C (-22°F to 158°F) Storage Temp: -40°C to +85°C (-40°F to 185°F) Power consumption: 1.9W (GPS), 2.4W (GPS+GLONASS) Input voltage: 3.3 to 9V DC Antenna power: +5 VDC (±10%), Size: 100 x 80 x 13 mm (3.9 x 3.1 x 0.5 in) I/O: 30 pins SAMTEC connector Antenna and Reference Clock Input signal: female MMCX straight connector Humidity: 95% non-condensing Shock: MIL-STD 810F, Fig 516.5- 10 (40g, 11ms) Vibration: MIL-STD 810F, Fig. 514.5C-17 Low Power Consumption! Harsh Environment-Proof!

MB 500 Technology and Performance Instant-RTK™ and LRK™: Fast initialization and centimeter accuracy at long range Typically 2 seconds initialization for baselines < 20Km 99.9% reliability Initialization range > 40Km Flying RTK™ accuracy at long range Decimeter accuracy up to 1000 Km

MB 500 Accuracy Specifications RTK Fixed RTK Horizontal (1 sigma): 1cm +1ppm Vertical (1 sigma): 2cm + 1ppm Flying RTK™ Horizontal (CEP): 5cm +1ppm after 3minutes of convergence Vertical (1 sigma): 10cm + 1ppm Heading Pitch/Roll Heading (1 sigma) : 0.2°/ Baseline (m) Pitch/Roll (1 sigma) : 0.4°/ Baseline (m)

MB 500 has been designed for various applications such as: MB 500 Applications MB 500 has been designed for various applications such as: Survey Offshore Marine dynamic positioning Tail buoy seismic tracking Unmanned Autonomous Aircraft Container tracking Machine control Opencast Mining Agriculture Etc

BLADE technology inside for… Optimal Use of SBAS and GLONASS ranging signals to strengthen the GPS solution allowing reliable RTK with GPS+SBAS or GPS+GLONASS+SBAS receivers HDG DT/BT Heading with baseline auto calibration Relative Positioning (RTK with moving base) Strong multi-path mitigation

BLADE technology inside for… Flying RTK Faster time to a decimeter accurate solution up to 1000 km baseline The L-Band alternative Long Range RTK Centimeter positioning over baselines up to 40km

PRODUCT DESCRIPTION ProMark 500 GNSS System ProMark 500 Sensor Multi-Constellation, dual-frequency receiver BLADE™ Technology MobileMapper CX Windows CE.Net ruggedized data collector Sub-meter hand-held GNSS receiver FAST Survey Complete suite of field applications Real-time and raw data collection GNSS Solutions Real-time and raw data processing Network solutions

PRODUCT DESCRIPTION ProMark 500 Sensor L1 & L2 tracking of GPS, GLONASS and SBAS BLADE™ Technology Real-Time precision SBAS Horizontal: < 3 m (10 ft) DGPS Horizontal: < 0.8 m (2.62 ft) Real-Time Kinematic Horizontal: 10 mm (0.033 ft) + 1 ppm Vertical: 20 mm (0.065 ft) + 1 ppm Post-Processed precision Static, Rapid Static Horizontal: 5 mm (0.016 ft) + 0.5 ppm Vertical: 10 mm (0.033 ft) + 1 ppm Kinematic 24 GPS channels, 24 GLONASS channels and 2 SBAS channels

PRODUCT DESCRIPTION ProMark 500 Sensor Initializations Typically 2 seconds for baselines < 20 km (12.4 miles) Range typically to 40 km (24.8 miles) Data characteristics Update rates to 10 Hz Recording intervals 0.1 to 999 seconds 128 MB internal memory (~83 MB available for data) Real-time support for: RTCM 3.1 RTCM 2.3 Magellan ATOM CMR/CMR + NMEA 0183 NTRIP and DIP connections

PRODUCT DESCRIPTION ProMark 500 Sensor Physical Characteristics Size: ~ 23 x 19 x 8 cm (~ 9 x 7 x 3 in) Weight: 1.4 kg (3.1 lb) OLED Monitoring screen RS232, RS422, USB, Bluetooth PPS & External event Operating temperatures: -30° to +55°C (-22° to +131°F) Storage temperatures: -40° to +70°C (-40° to +158°F) Shock: ETS300 019, 2 m (6.56 ft) pole drop Vibration: EN60945 LiIon battery: 7.4V - 4400 mAh, ~ 6 hours @ 20°C OLED=Organic Light Emitting Diode

5/8” x 11 Threaded Connector PRODUCT DESCRIPTION Bottom of Sensor Comm. Module USB UHF Antenna Connector 9-Pin Fisher TNC GSM Antenna Connector GSM Modem SMA Under Comm. Module Battery Cover RS232/422 Power port will accept 9 – 28 volts. Port A is the RS232 connection Port C is the Bluetooth connection Port D is the Internal Radio Port E is the GSM Modem External Power 7-Pin Fisher 3-Pin Fisher Bluetooth Antenna 5/8” x 11 Threaded Connector

PRODUCT DESCRIPTION Interface Buttons and Indicator LED Power LED Scroll Log Special button combinations: With the PM500 off, pressing the Power, Log and Scroll buttons simultaneously for a few seconds will restore all the factory settings. Always use this combination after changing the radio module which will allow the receiver to recognize the new module. With the PM500 off and a USB key connected, pressing the Power and Scroll buttons simultaneously for a few seconds will cause the PM500 to start a firmware upload process. If there is no USB key connected or the key does not contain a firmware update, then the process will abort after a few seconds. Power On/Off

PRODUCT DESCRIPTION Real-time Communications ConfRadio: New software utility for programming Magellan radios. U-Link Transmitter is compatible with PDL Rovers U-Link Transmitter configuration is stored in the PM500

PRODUCT DESCRIPTION LED Display Screens Boot Screen System Status Memory Statistics System Information File Management Displays will turn off the backlight after approximately one minute of inactivity. When the backlight is off, a short press of the Scroll button will turn the backlight on.

PROFLEX 500

PROFLEX 500 GNSS Characteristics Real-Time Accuracy Memory 75 Channels GPS L1 C/A, L1/L2 P-code, L2C GLN L1 C/A, L2 C/A, L2P SBAS Code and Carrier (WAAS, EGNOS, MSAS) Up to 20 Hz output (raw data and position) Real-Time Accuracy RTK - 1 cm + 1 ppm (Horizontal) SDGPS - 0.9 m (Horizontal) Flying RTK - 20 cm + 1 ppm (Horizontal) Memory 128 MB Internal - (~ 83 MB available for data logging) Expandable via USB

RECEIVER REVIEW Environmental Characteristics Monitoring OLED Display Operating temperature: -30ºC to +65ºC Humidity: 100% condensing IP67 waterproof and dustproof as described in EN60945 Salt mist as defined in EN60945 Shock: MIL-STD 810F Vibration: MIL-STD 810F Monitoring OLED Display Internal battery acts as UPS ATOM, RTCM 3.1, CMR/CMR+, RTCM 2.3 GSM/GPRS/EDGE Class 10 Quad band modem U-Link and Pacific Crest Tx and Rx options Backpack configuration

V2 FIRMWARE ENHANCEMENTS GPS L2C Support L1 (by default) , L2 in option SDGPS mode (SBAS Differential) Moving Base option Data streaming via Ethernet Data download from the Internet Configuration and control via Internet Web Interface Firmware upgrade via Internet New OPTIONs introduced

ETHERNET FUNCTIONS Web controller – Server Access Open web browser Indicate the IP address in the URL