Filcoten vs. Polymer Trench Drain

Slides:



Advertisements
Similar presentations
Unit 8 Fastening Systems
Advertisements

GRP Service Riser Systems PULTRUDED STRUCTURAL PROFILE SUPPORTS WITH GRP MOULDED ANTI SLIP GRATING FOR OPEN RISERS AND CUT OUTS FOR SERVICES.
Civil Engineering Materials
SHOTCRETING K.V.SUBBA RAO.
Arma-Chek R Covering Systems STANDARD FEF PRODUCTS.
Materials used in the external walls. Brick Bricks are probably the oldest manufactured material we have today. Although the method of production has.
Present Water Infrastructure Local authorities were established for conservation & proper distribution of water. Pipe lines were laid & connections provided.
Polymer Floor & Wall Coatings: Selection, Preparation, Installation and Troubleshooting.
VCI anticorrosion and Industrial packaging By Jinny Kim Business Manager - Industrial 1.
Walls Ron Gatepain constructionsite.
New Ideas in Specification Drainage & Specialties Products Hepworth – Doha, Qatar - Jan-14, 2012.
Product Range  Epoxy Flooring & Coatings Epoxy Flooring & Coatings  Waterproofing Compounds Waterproofing Compounds  Grouts Grouts  Admixtures Admixtures.
MUNCHY THE CATERPILLAR PRODUCT RELEASE DOCUMENT TM.
Masonry. Terms –F > 15-5 –Go thru all figures –Joints between brick = ¼ inch.
Gas Transmission Pipelines
INTERIOR WALL FINISHES
Epoxy Resin Coatings Team: Monopolymer.
Direct Shear Test CEP 701 PG Lab.
PRE-FABRICATED STRUCTURES
University of Palestine Industrial Engineering Department Materials And Construction Technology Chapter (2) Blocks And Stone works.
CRACK CONTROL IN CONCRETE MASONRY WALLS
March 13, 2007 DRILL Architecture Styles and Vocabulary QUIZ tomorrow
Metals. Introduction u Metal is used in various places in the construction process including: –rebar = reinforcing steel in round shapes –flashing = thin.
Arkema’s property. Any unauthorized use, distribution, copying or printing is strictly forbidden without Arkema agreement. Copyright ® June 2015 Automotive.
Chapter 2b Foundations Shallow & Deep Foundations.
1 COMPOSITE MATERIALS What are composite materials? Two or more materials bound together Example from civil engineering: Concrete reinforced with steel.
BUILDING CONSTRUCTION V ARCHITECTURAL FINISHING SYSTEMS
INTRODUCTION Definition:
What is the most Important system on your vehicle?
The new technology for watertight construction joints
Fangxing Thanks for All Your supporting in We wish a brightness and successful cooperation in the new year 2011!
BondChem TECHNICAL DATA Roll-a-crete ( Three Component Cementitious Waterproof Coating ) Page 1 / 2. DESCRIPTION BondChem’s Roll-a-crete is a three component.
Architectural acoustics Acoustical materials. Sound absorber: Reapor Expanded Glass Granulate  Description  The sound absorber for challenging environments.
PLASTERBOARDS Plasterboard is a rigid flat sheet material which comprises of a core of gypsum plaster with the surfaces covered by stout paper. This covering.
4.4 SOIL NAILING SOIL NAILING IS A REINFORCEMENT METHOD TO REINFORCE THE GROUND WITH STEEL BARS OR STEEL BARS IN GROUT FILLED HOLES. IT IS MAINLY USED.
BILBOND H 4545 Formerly Bhavi International Ltd.
Unit 6: Building Technology in Construction Learning Outcome Understand the techniques used in the construction of superstructures for low-rise domestic.
Certificate number: FS453/02 Application FS21 Firestop Panel is used to firestop mechanical and electrical services where they pass through fire rated.
Blocking a b c d.
Welcome to HASOLON NYLON PRODUCTS PVT. LTD. Website: ID: Mo:
Sanitary Engineering Lecture 13
2016 SUBSTRATE PREPARATIONS. SUBSTRATE PREPARATION METHODS FOR CONCRETE Very Course Profile Scabbling – Suitable for very aged, weak or contaminated substrates.
FIXING the WORLD Technical Training. 1. Definition. 2. Working Principles. 3. CE Marking 4. ETA´s. Technical Training Iván Martínez Contents.
5. FERROCEMENT.
FORGING PROCESSES COMMON FORGING OPERATIONS INCLUDE: 1. Upsetting
Unit 27: Mechanical fasteners 2 Dr
Building Materials of the Future
Structural Slab Analysis
National Silicone THE WAY WE DO SILICONE SILICONE RUBBER 2016
High Density Polyethylene (HDPE) Panels or Sheets
Unit 27: Mechanical fasteners 2 Dr
METHODS OF CRACK REPAIRS
Flash penetrations through roofs and walls.
High Order correctors coil manufacturing
Chapter 27: Mechanical fasteners 2
INTRODUCTION.
Objectives Describe the fasteners, anchors, and adhesives used in construction and explain their uses. f. Identify various types of mechanical anchors.
MATERIALS AND CONSTRUCTION I
Zinc Powder for Coating - Protective Primer on Metal Surfaces Zinc Powder For Coating.
Introduction to Pavement Design
Roller Shade system from Hunter Douglas
The evolution of pipe cutting Patented products Designed in Finland Pipe Cutting System.
FBE04 BUILDING CONSTRUCTION AND MATERIALS
GENERALPIPINGREQUIREMENTS:. Designing and erecting an efficient piping system requires certain aspects/ requirements which could be found in our PME handbook…
An Introduction. An Introduction An Introduction Atlas steel lockers are the ultimate solution when it comes to versatile, durable personal storage.
An Introduction. An Introduction An Introduction Atlas steel lockers are the ultimate solution when it comes to versatile, durable personal storage.
Floor outlet boxes British Standard
Pipe fitting Threads on pipe fittings are tapered and rely on the stress generated by forcing the tapered threads of the male half of the fitting.
Gas Transmission Pipelines
Presentation transcript:

Filcoten vs. Polymer Trench Drain 04.04.2019

HYDRO BG is an Austrian based multi-national corporation doing business in 32 countries worldwide. HYDRO BG is the inventor and sole producer of Filcoten HPC trench drains. HYDRO BG’s innovative approach in forging new paths brings us a one of a kind product. Filcoten combines affordable functionality with 100% sustainability.

Hydro BG Inc Locations HQ North America, Montreal, QC – Canada USA – Plattsburgh NY Inventory Gonzales LA, USA Montreal QC, Canada Contacts Serge Brouillette, Operations Development Manager and YOUR Main Contact to MIFAB Kastriot Malci, Technical Support Engineer Daniel Crevier, Business Development Manger Ferdinando R. Lezza, President 04.04.2019

100% recyclable, 100% Sustainable, contains no VOC’s or heavy metals 100% recyclable, 100% Sustainable, contains no VOC’s or heavy metals. HYDRO BG uses no heavy metals in the production of Filcoten. Filcoten is completely non-flammable, it contains no resins to ignite or contribute to a fire. Filcoten is made of cement- bonded fiber, which react to changes in temperature in the same way as the surrounding concrete. Filcoten is tested down to -40 F. Because Filcoten uses no polymer resin it is 100% UV resistant.

Impact Resistant As a result of Filcoten’s fiber reinforced exclusive formula, product stability and strength are significantly increased. Filcoten is expected to last the life of the building. Compression Strength Drop Test

Vertical outlet on every channel Rail Choices - Stainless Steel - Galvanized Steel 4 mm instead of competitors Vertical outlet on every channel Every channel has the possibility of a channel sized outlet, i.e.. a 4” channel an have a 4” outlet. Functional design The Filcoten railing and channel wall are designed to be flush , allowing more application flexibility around buildings or with pavers. Technically advanced manufacturing The Filcoten process uses NO releasing agents in the de-molding process. This leaves a cement to cement surface not found with other production methods. This increased adhesion, provides the opportunity for the channel to become monolithic with the surrounding surface. UV Resistant Containing no polymer , Filcoten is completely unaffected by direct sunlight.

Sustainable Filcoten is free of resins, heavy metals and solvants. Filcoten is 100% recyclable. Filcoten can be used in internal living spaces. No aggressive agents are released when machined (Please still use mask to protect from fine dust, like for concrete machining) 04.04.2019

Frost resistance Filcoten will absorb substantially less water than standard concrete. Frost damages occur mainly in the surrounding concrete due to water infiltration between the prefabricated components. Plastic and polymer concrete components are prone to separation with the surrounding concrete - which leads to water infiltration due to: Non-grip surface Use of releasant agents (polymer concrete) Different material expansion (HDPE & PP) Frost resistance is increased if the prefabricated component will become one monolithic unit with the surrounding concrete with equal mechanical properties (like with the Filcoten product). 04.04.2019

Temperature expansion Equal temperature expansion as the surrounding concrete. No thermal related stress possible. 04.04.2019

Adhesion Filcoten is cement based and has the same material properties as concrete. Filcoten channels are produced without releasant agents and therefore are absolutely free of grease. Filcoten has optimal adhesion to the surrounding concrete. Sealant material can be used without degreasing the surface. 04.04.2019

Machining Filcoten can be cut and drilled with standard concrete tooling. Standard adhesives for concrete can be used. Cracks can be fixed unlike with polymer concrete. 04.04.2019

Four point grate safety locking system Anti-vandalism locking available for self-locking system (Suffix -6) Unique 4 point fiX self-locking system with 2 longitudal anti-shifting lugs 04.04.2019

MIFAB T1500 vs. Smith / Aco Minimum wall thickness 19mm / ¾“. Available with galvanized and stainless steel rails. Heavy duty rails, twice as (thick – 4mm vs. 2mm) strong as Aco. Load Class E Four point fiX self locking device – no locking bar in the hydraulic section like the quick lock of Aco. Less than ¾“ wall thickness. Light duty rails for loading class up to C250kN/1162psi only. However Aco also provides gratings up to cl.E600kN/2788psi Quick lock 1 point locking for grating section with capacity limiting bar in hydraulic section. Up to 30% interference depending on the height of the channel. 04.04.2019

MIFAB T1500 vs. Polydrain Locking bar 04.04.2019 Minimum wall thickness 19mm / ¾“. Heavy duty galvanized or stainless steel rail. Same surface design with metallic materials on exposed surface. Up to Load Class E. Four point fiX self-locking system. Sealant joints are standard feature. Minimum wall thickness 12mm / 1/20“. No edge protecting steel rails for medium loads. Polymer edge can withstand load class up to Class B125kN/581psi only. Expoesd Polymer concrete edge is not UV resistant and will deterioriate over time. No self-locking devices available. Locking bar reduces substantially the hydraulic section by up to 30% depending on the height of the channel. Red dot locking is not waterproof. No sealant joint available. 04.04.2019

MIFAB T1500 vs. Polydrain with frame Ductile iron and galvanzied steel grating fits in the steel rail channel. Up to Load Class E. Four point fiX self-locking system or bolted locking available. Frame is not mechanically connected to the channel body. Installation with black top is not suitable. Frame can slide on channel in case of heavy longitudinal brake forces. Connecting point between anchor lugs and frame will cause cracks in concrete due to thin layer of covering surface. 04.04.2019

T1400 polymer T1500 Filcoten HPC When shall I use T1500 T1400 polymer T1500 Filcoten HPC Indoor application Controlled temperature situation Low to medium load applications Outdoor applications Heavy duty application Special floor finish like Epoxy finish Tile finish Pavers Installation flush to wall or kerb stone Fire code requirements UV requirements 04.04.2019

Thank you 04.04.2019