PPT12: Shape Modification Tools CAP 6736 Geometric Modeling PPT12: Shape Modification Tools PPT and video are due no later than April 12 Submit to: lpiegl@gmail.com This template file is just an outline of the presentation that you need to complete. Additional pages may be necessary to fully explore the topic above. Each page should contain adequate text as well as illustrations. You are free to use all publicly available information (text as well as graphics) as long as the sources are properly acknowledged.

Team members’ contributions Member [name]:

Part I: Technical details For this part you will need an equation editor. You may use: MS equation editor, MathType, LaTeX, or Handwritten equations if all else fails

Control Point Repositioning Suggested content: control point repositioning move one point shape function

Control Point Repositioning Suggested content: control point repositioning move one point examples

Control Point Repositioning Suggested content: control point repositioning move two points examples

Control Point Repositioning Suggested content: control point repositioning for surfaces examples

Weight Modification Suggested content: weight changes for curves one weight examples

Weight Modification Suggested content: weight changes for curves two weights examples

Weight Modification Suggested content: weight changes for surfaces examples

Warping Suggested content: curve warping warp function control point repositioning

Warping Suggested content: curve warping warp process

Warping Suggested content: curve warping examples

Warping Examples Suggested content: curve warping examples

Warping Suggested content: surface warping region warp

Warping Suggested content: surface warping region warp

Warping Suggested content: surface warping skeletal warp

Warping Examples Suggested content: surface warping skeletal warp examples

Flattening Suggested content: curve flattening the process of control point repositioning

Flattening Suggested content: curve flattening examples

Flattening Suggested content: surface flattening examples

Bending Suggested content: curve bending bending with respect to a base curve

Bending Suggested content: curve bending examples

Bending Suggested content: surface bending bending with respect to a base surface

Bending Suggested content: surface bending examples

Part II: Design examples

Design Examples Suggested content: Add design examples: images and/or videos Give credit to the designers

Part III: GM lab For this part of the assignment you may use an existing system, such as Blender, or write the code and visualize the result using graphics tools like Processing.

Geometric Modeling Lab Suggested project: Design shapes using curve and surface shaping tools