TSW3070 ARB WAVEFORM GENERATION 10/05/2017 Neeraj Gill

HARDWARE REQUIRED TSW3070EVM TSW1400EVM 6V power supply for TSW3070EVM Mini USB cable for TSW1400EVM USB A to B cable for TSW3070EVM SMA cable for applying clock signal SMA to BNC for connecting TSW3070EVM output to Oscope

Hardware setup USB A to B FOR TSW3070EVM 6V for TSW3070EVM Output to Oscope Clock signal 500MHz 6dBm Mini usb for TSW1400EVM

DAC5682Z GUI LOAD If board is connected correctly, status will indicate “Connected to DAC5682Z EVM!” Click “Register Config”

DAC5682Z GUI Load Cont… Step 2 Step 1 Step 1 – click “Load Regs” under CDCM7005 tab and select “CDCM7005_4x.txt” Step 2 – click “Load Regs” under DAC5682Z tab and select “DAC5682Z_4x.txt”

Setup DAC in HSDC Pro Launch HSDC Pro, select Serial Number (DAC Capture Card) Click OK

Setup DAC in HSDC Pro Select the “DAC5682Z” from the FW dropdown Click OK to load the FW

Setup DAC in HSDC Pro Go back to the DAC GUI and click the DLL reset radio button twice The DLL light should turn from red to green

Setup DAC in HSDC Pro Set “Data Rate” to “125M” and “DAC Option” to “2’s Complement”

Setup DAC in HSDC Pro Step 1 Step 2 Step 1 – Click “Load External Pattern File” Step 2 – Select “DAC5682z customer pattern file.csv” and click OK

Setup DAC in HSDC Pro Click Send to start waveform playback

DAC5682Z GUI Load Cont… Go Back to DAC GUI and toggle software sync radio button

Output