Panasonic Attune HD3 Headset WX-CH455M Staging and preparing The HD3 headset for McD WX-455M-C3010 for the WX-C3010 Center Module WX-455M-CC41X for the WX-CC411/412 Center Modules Start
needed Micro USB Data Cable HD3 Settings Tool Software Can not use charge only cable You can test if the cable is a Charge Cable by connecting and the software will not connect to headset HD3 Settings Tool Software Available on the FTP3.Panasonic.Com site WX-CH455 HD3 Headset Battery not needed Windows PC Windows 7 or higher Quick Link Buttons HD3 Headset Steps WX-CH455M-C3010 Steps WX-CH455M-CC41X Steps Save/Open Settings
HD3 Headset Steps P1 P2 P3 P4 Open HD3 Headset Cover (P1 & P2) Plug in Data Cable to the headset and the PC (P3) Start the Software Turn on HD3 Headset (P4) You do not need the battery in the headset P3 P4
Software Steps For WX-CH455M1 Open Software Should display Connected Hit the [Receive] Button Set Default Settings: Talk Button Setting: Talk Lock Page Button Setting: PTP Talk/Page Auto Off Setting: On Voice Prompt Setting: English Center Module Model Selection: WX- C3010 Headset Microphone Gain: Off Talkback: Off Hit the [Update Headset] Button Disconnect headset and re-box Headset. Put note page in the box and reseal.
Software Steps For WX-CH455M2 Open Software Should display Connected Hit the [Receive] Button Set Default Settings: Talk Button Setting: Talk Lock Page Button Setting: PTP Talk/Page Auto Off Setting: On Voice Prompt Setting: English Center Module Model Selection: CC411/WX-CC412 Headset Microphone Gain: Off Talkback: Off Hit the [Update Headset] Button Disconnect headset and re-box Headset. Put note page in the box and reseal.
Save/Load Settings To save and load settings to speed changing settings. Open Software Click Save As or Open Save As: Once the settings have been adjusted, use this feature to save these settings to program the next headsets much faster. Open To load the previous saved settings, click File/Open and select the file that was created with the “Saved As” feature. Once opened, you can skip changing the settings and just click [Update headset] button.