[AttuneII]How to get the screenshot on the Center Module Preparation PC SD Memory Card RS-232C Interface cable for Attune2 Connect PC to the center module by interface cable(RS-232C) for Attune2. Insert SD/SDHC memory card. Operation Start terminal software and set as below. Speed : 19200bps Data bit : 8bit Parity bit : none Stop bit : 1bit Show the image which you want to take a screenshot on the LCD. Input below commands on the terminal software. Command : gsav -f \\[File name].bmp (* ‘\’ means “Backslash”) ex) gsav -f \\SettingInformation.bmp Then the image file which named by command is saved in root directory on SD/SDHC memory card. Show the image on the LCD Input the commands. Saved on SD/SDHC card