Model Reversion : A Client : Slider qty : 3 Model : Latte-2nd Lifter qty : Part name : Frame,2nd drawer Main,MP_2-2 Gate type : Pin gate Part no.. : 54-06344-00A Cavities : 1 DFM by : WeiYong 2/3 Plate : 3 plate

DFM follow-up issue. Integral Corrective Action List ICAL ICAL 1 - Date of opening (all dates in 2036) 2 - Date of beginning of action 3.- Date foreseen for validation DFM follow-up issue. Integral Corrective Action List 4 – Date of validation (closing) Page Open points Solutions / Action Who 1 2 3 4 P.3 Gate (mold flow) Waiting for confirmation. 08/09 P.4 Parting line P.5 P.6 P.7 Slider Waiting for confirmation P.8 Suggestion (others) P.9 P.10 P.11 Draft angle P.12 P.13 P.14 P.15 P.16

Gate (mold flow) Four pin gate

Parting line cavity core

Parting line cavity core

Parting line cavity core

PLS add slider pins for preventing sticking in slider half.

THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK. Suggestion (others) THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK. Suggestion (others) THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK. Suggestion (others) THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

Draft angle This yellow surface need cut plastics 1° for slider release. This yellow surface need cut plastics 1° for slider release.

This yellow surface need cut plastics 1° for slider release. Draft angle This yellow surface need cut plastics 1° for slider release.

This yellow surface need cut plastics 1° for slider release. Draft angle This yellow surface need cut plastics 1° for slider release.

Draft angle This red surface need cut plastics 3° for shutoff.

This shade surface need cut plastics 3° for shutoff. Draft angle This shade surface need cut plastics 3° for shutoff.

Draft angle All yellow surface no draft angle. PLS cut plastics 1° for cavity release, cut plastics 0.5° for core release.