•Openings – Gables and Skylights Module Learning Outcomes: . Module Contents: MODULE 10 – Roof Framing •Rafters •Framing •Openings – Gables and Skylights •Roofing Materials, Sheathing & Insulation •Air Movement •Attics Module 10 ARCH 28544 – Architectural Studio 2
Rafters Common Rafter Hip Rafter Ridge Board Valley Rafter Gable Cripple Jack Rafter Valley Jack Rafter Jack Rafter Module 10 ARCH 28544 – Architectural Studio 2
ARCH 28544 – Architectural Studio 2
Framing – Rafter vs. Truss? OR GABLE Module 10 ARCH 28544 – Architectural Studio 2
ARCH 28544 – Architectural Studio 2 Framing : Lookouts and Overhangs Module 10 ARCH 28544 – Architectural Studio 2
Framing - Lookouts and Overhangs Module 10 ARCH 28544 – Architectural Studio 2
Framing - Lookouts and Overhangs Module 10 ARCH 28544 – Architectural Studio 2
ARCH 28544 – Architectural Studio 2 Framing - Blocking Module 10 ARCH 28544 – Architectural Studio 2
Openings – Gables and Skylights Module 10 ARCH 28544 – Architectural Studio 2
Openings – Gables and Skylights ARCH 28544 – Architectural Studio 2
Openings – Gables and Skylights ARCH 28544 – Architectural Studio 2
Roofing Materials, Sheathing & Insulation Module 10 ARCH 28544 – Architectural Studio 2
Roofing Materials, Sheathing & Insulation Module 10 ARCH 28544 – Architectural Studio 2
Air Movement
Air Movement
Drainage – Water Management
ARCH 28544 – Architectural Studio 2 Fancy Framing Module 10 ARCH 28544 – Architectural Studio 2
ARCH 28544 – Architectural Studio 2 Roof deck See: http://www.finehomebuilding.com/how-to/qa/building-roof-deck.aspx Module 10 ARCH 28544 – Architectural Studio 2
1 - find a relevant OBC note; Framing - REVIEW Choose a connection point between two framing elements (i.e. rafter connection to tie beam) and: 1 - find a relevant OBC note; 2 – draw a detail sketch of the connection showing how the two pieces are held together; 3 - write a descriptive note that would explain to a contractor how to build it; 4 – hand in to your instructor. Module 10 ARCH 28544 – Architectural Studio 2
Required Reading Reminder: Course Reader: Canadian Wood-Frame House Construction – CMHC: “Ceiling and Roof Framing” p.121-146. Module 10 ARCH 28544 – Architectural Studio 2
To prep for Assignment 5: determine each of the slopes of your roofs and add it to your CAD drawing elevations. size each of your roof members, including your ridge board using the span table in the OBC determine what your roof edge detail will be and show your eaves show any overhangs / lookouts frame any openings, like dormers or skylights determine your sheathing size, span and layout