Welcome to the MaxTRAQ Tour Introduction Welcome to the MaxTRAQ Tour MaxTRAQ is manual digitizer that can be used to extract kinematic properties out of standard AVI files. This brief introductory will show you the main features of MaxTRAQ and how to use them. Copyright © 2002 Innovision Systems, Inc.

Copyright © 2002 Innovision Systems, Inc. Main Features Reads standard AVI Files Export Data as ASCII or AVI Print or Cut and Paste Manual or Prediction Tracking Auto-advance Point and Frame Options Adjustable Video Brightness & Contrast, etc. Rotate, Flip and Photo-invert Image 2D Scaling and Coordinate System Point Traces and Stick Figures Overall Zoom and Point Zoom 1 or 2 Point Distances 2, 3 or 4 Point Angles Image Notes Copyright © 2002 Innovision Systems, Inc.

Copyright © 2002 Innovision Systems, Inc. The User Interface Toolbar Point Table Digitizing Controls Video Controls File Properties Copyright © 2002 Innovision Systems, Inc.

MaxTRAQ Video Controls The Video Controls are used to move around in the video and to adjust video properties such as Brightness, Contrast, B/W. You can also adjust the number of frames to step and the replay speed. The T0 and T1 controls allows you to set the start and end frame. Play Reverse Previous Frame Next Frame Play Forward First Frame Stop Last Frame B/W Mode Step Length Brightness Superimpose Contrast Play Speed Set Start Frame Current Frame Indicator Set End Frame Copyright © 2002 Innovision Systems, Inc.

Copyright © 2002 Innovision Systems, Inc. Digitizing Digitizing Points Digitizing points of interest is easy. Turn the digitzer on and simply click where the point is located in the image. You can zoom in around the mouse cursor by holding down the shift key. To automatically advance to the next point, click on the Auto-point button. You can also have MaxTRAQ advance to the next frame after you have finished digitizing each frame by checking the Auto-frame button. To delete all digitized points in the current frame, press the Clear button. Digitize On/Off Autoadvance Point Autoadvance Frame Number of Points Delete all Points Copyright © 2002 Innovision Systems, Inc.

Traces and Stick Figures Point Traces Click on this button to display a trace of the digitzed points. Stick Figures Click on this button to define a stick segment between 2 points. This has to be repeated for each stick segment. Click on this button to display defined stick segments. Stick Figures Point Traces Copyright © 2002 Innovision Systems, Inc.

Copyright © 2002 Innovision Systems, Inc. Tools Distances Calculates the distance between 2 points or 1 point and the origin. Angles MaxTRAQ can calculate the angle between 2 points and the x axis, 3 points or 4 points. Notes To display a note in the current frame, invoke to Note tool and click where you want the pointer and the position of the note. Scaling Gauge Scales the coordinate system using the distance between 2 known locations. Scaling Gauge Image Notes Angles Distances Copyright © 2002 Innovision Systems, Inc.

Reporting Once you have digitized your points of interest you can: Save your analysis as a MaxTRAQ file, export your data to an ASCII file or save it as a new AVI file. Cut and Paste current frame Print current frame Copyright © 2002 Innovision Systems, Inc.