38M-49M BOOM CAB INSTALL

5.00 STAGE 1 38M-49M BOOM CAB INSTALL 1 NOTE: Remove panel from MAC truck to modify as shown. Find # Parts switch EL V Inverter plate WH Green light EL0003 NOTE: Install parts into panel as shown ½ hole X /8 hole X 113/32 hole X 1

STAGE 2 38M-49M BOOM CAB INSTALL NOTE: Re-install panel into MAC cab NOTE: Install Reed marker light harness and 12V battery harness in MAC frame rail using tie wraps. NOTE: Connect (-) 12V to the battery on off selector switch, Off side as shown. NOTE: Connect 12V power cable to (+) 12V fused side on Mac battery tray

STAGE 3 38M-49M BOOM CAB INSTALL Find # Parts qty 1 mack trailer plug 1 2 mack tailight plug cable 14 AWGx5C 2.5F cable 16AWGx2C 10F #10 ring lug / male/fem 1 bullet lug cable 14AWGX4C 12F 6.00 RUNNING LIGHTS…... BACK-UP HORN…….. 1 SIDE VIEW 5 6 #1 #2 #3 #4 YELL/GRN P/N CABLE 3 RIGHT TAIL LIGHT 2 A B C D E #1---B/UP #2---R/LIGHT LEFT TAIL LIGHT #3---BRAKE/RH #4---SPARE #5---GND #1 A B C D E #1---B/UP #2---R/LIGHT #3---BRAKE/LH #4---SPARE #5---GND #1--(+) #3--(-) LIC PLATE LIGHT YEL/GRN A B C D #4 #1 #3 #4 #2 WIRE # 7.00 GROUND………...…… BOOM TRUCK MARKER LIGHT HARNESS ASSY 5.00 GND P/N CABLE P/N CABLE P/N CABLE 7 7 RUNLIGHTS L / TURN BRAKE R / TURN BRAKE BACK -UP FRONT VIEW MAC PLUG 1AB DC 2

STAGE 4 38M-49M BOOM CAB INSTALL CHINA BOOM POWER HARNESS Instructions: Cut cable as directed for appropriate boom size. Find # Parts qty fuse holder WH A fuse WH cable 14 AWGX4C 30FT 30 FT 49M China Boom + - #1,#2 #3, Yell,Grn 1FT Shrink 6 Shrink 54 Loom 25 FT + - #1,#2 #3, Yell,Grn 1FT Shrink 6 Shrink 54 Loom 39M China Boom CUT OFF 12IN WIRE 12 CUT OFF 12IN WIRE

38M-49M BOOM CAB INSTALL CB38 BATT CB43 IGN GNDREV PWR NEUT PWR CB23 IGN MAC PANEL MAC HORN RELAY RPM + RPM _ + - PTO LIGHT ON/OFF Q Q35 PUMPDRIVE CONTROL BOX #2#3 A+A - GRN/YELL SPARE MAC ECM J1-7J1-8 J2-10 J1-6 RPM + RPM -PTO SPEED INVERTER ON/OFF #1 HORN RELAY 12VDC A12 SPARE NOTE* Cut terminal rail 3