INSTALLING OF VIDEO GAME Competency : Installing of video game
Teknologi dan Rekayasa DIRECTION BE ABLE TO INSTALL THE PLAY STATION WITH OTHER DEVICES
Teknologi dan Rekayasa INSTALLATION HOW TO USE PSX CABLE Even the end of the AV cable that is ON the back of the panel associated with the AV output connector with multimedia
Other end of the AV cable to connect to the audio video inputs on the rear panel TV or VCR with the color match cable
Connect the AC power cable
1.Data – pin ini membawa sinyal, setiap kali tombol pengendali ditekan dikirim pengendali ke PSX.Ini merupakan transmisi serial 8 bit. 2.Command – Pin ini digunakan oleh PSX untuk mengirim informasi ke pengendali. Seperti informasi pemicu motor dalam controller Dual Schock pada saat yang tepat, juga berupa transimisi serial 8 bit. 3.Tidak digunakan. 4.Ground. 5.Ground – memberikan tegangan 5 volt pada pengendali PSX. 6.Slect – digunakan oleh PSX untuk memberi tahu pengendali data yang datang. 7.Clock – membawa sinyal sinkronisasi dikiri PSX untuk pengendali. 8.Tidak digunakan. 9. Acknowledge – mengirim sinyal ke PSX dari pengendali setiap setelah perintah diterima pin 2. Insert the plug to stop contact
Teknologi dan Rekayasa Press the on / standby / reset make sure the lamp indicator light.
Press enter key note PSX game CD and close the back
Turn on TV
Press the TV / video on the TV remote
PEMASANGAN PSX MENGGUNAKAN ADAPTER RFU Connect the flat end of the RFU adapter cable to the AV Multi out the back panel PSX
Connect the output cable to the RFU with the back of the TV antenna. ANT input on the adapter cable RFU
RFU adapter Set button and select the TV channel 3 or 4. Do not use the area that is fully
CARA PEMASANGAN PSX DENGAN KABEL S-VIDEO Connect the cable S-Video to AV multi-out panel on the back of the PSX
Connect one end of the cable to the S- Video input on the back of the TV, gray cable to jack S-Video IN, white and red cable into the jack audio IN
NITENDO 64 INSTALATION
NINTENDO 64 CONTROLLER
KONSOL OF PLAYSTATION 2 Teknologi dan Rekayasa FRONT SIDE
Teknologi dan Rekayasa BACK SIDE
CONNECTING TO THE TELEVISION Teknologi dan Rekayasa
CONNECTING WITH CONTROLLER Insert the analog controller (DUAL SCHOCK ® 2) in the port to the console controller
In the standby position presented on the console front of a red light indicates that the Wana concole in standby mode
USE ANALOG CONTROLLER Teknologi dan Rekayasa Analog controller is a key function sensitip pressure. If you also have a resonance function. 1.Analog stick left and right, or L3 and R3 buttons function only in analog mode (red indicator). 2.R3 and L3 button function when the analog stick is pressedn
THE END Teknologi dan Rekayasa By. Setyo Harmadi,ST SMK Muhammadiyah 3 Yogyakarta