SX-UP2 installation for Windows XP In this guide you will be instructed on how to install the SX-UP2 cable in combination with the Roland EGX-20 Lode PLessers Roland DG
After the cable is plugged in , the following messages will appear. - Plug in the cable. After the cable is plugged in , the following messages will appear. Lode PLessers Roland DG
Lode Plessers Roland DG
Lode Plessers Roland DG
Lode Plessers Roland DG
- EGX-20 driver installation. The following steps will show you how to install the EGX-20 driver on the correct communication port. Lode PLessers Roland DG
Open the “Printer and Faxes” menu Lode Plessers Roland DG
Add a printer Lode Plessers Roland DG
Click “Next” Lode Plessers Roland DG
Local printer attached to the computer Click “Next” Lode Plessers Roland DG
Choose the highest USB Port number. Then click Next. Lode Plessers Roland DG
Click the “Have Disk…” button Lode Plessers Roland DG
Click the “Browse…” button. Click “OK” Click the “Browse…” button. Browse to the drivers folder on your CD and select the correct folder for your windows operation system. Lode Plessers Roland DG
Select the Roland EGX-20 Click “Next” Lode Plessers Roland DG
Replace existing driver Click “Next” Lode Plessers Roland DG
Click “Next” Lode Plessers Roland DG
Choose NO Click “Next” Lode Plessers Roland DG
Click “Finish” Lode Plessers Roland DG
Choose “Continue Anyway” Lode Plessers Roland DG
The files will be copied to your computer. Lode Plessers Roland DG
The Roland EGX-20 is added to your printers and can be used with the SX-UP2 Cable. Lode Plessers Roland DG
Don’t hesitate to contact us if you need help. Roland DG support@rolanddg.be +32 14 57 59 11 Lode Plessers Roland DG