Enki has a long-lasting experience in the development of any medical Device, although in recent years we have specialized in epiduroscopy, pain therapy and radiofrequency catheters. We have designed customized radiofrequency catheters with and without balloons, steerable video-guided catheter with balloons electrified, with 2, 3, 4 directions, discal decompressors. Each of our catheters has been developed to satisfy a specific feature required by our customers. Therefore we feel that we are the right company which can help you design a unique device that would make the difference. Engineering is performed with Finite Elements Analysis (FEA) and flow simulation. For your convenience we have attached a few photos of some of our catheters parts designed from our R&D department especially for our customers. This will help you understand our capabilities.

Custom Moulded components Custom Braided, Multilayer, Multilumen and bump tubing Custom dipping & Blow-moulding balloons

Epiduroscopy Video-guided Catheters 4 lumen catheter sheath …Slow Two directions …& Fast Two different movements Available Diameters: from 9.6Fr to 11.4Fr …with double RF electrode Accessory with Balloon 3.6Fr…

Electrified 3 Fr Catheter Two directions Cable rolled in The handle Retractable cable RF steerable catheter with thermocouple

Epiduroscopy Video-guided Catheters Diameters from 8.4 to 10.5Fr 2 & 4 direction! 6 lumen catheter sheath

RF steerable catheter with thermocouple Light & ergonomic handle Diameter 5.1 Fr

Epiduroscopy Video-guided Catheters 4 lumen catheter sheath

Supplied separately from the device Discal decompressor Cochlea 2.4 to 3Fr Disposable motor Supplied separately from the device

Electrified and non catheter with NiTi needle coming out Diameter 3.6Fr / needle 1.5Fr Handle engineered to allow 30 movements before it stops!

Fibrin submission Mixing & spray devices

Discal inject-decompressor Cochlea 3Fr

Irrigeasy

Automatic spray devices We would like to remind you that all our products are entirely developed and manufactured inhouse, thanks to our extrusion department equipped with tri-/four layer extrusion lines, a rapid-prototyping and a moulding department for small components moulding, a balloon clean room and clean rooms for our catheters assembly. We have recently set up a compounding department to develop plastic materials in different medical grades and braided tubing have been added to our range of products. We are confident that our know-how, experienced staff and technologies can be a valid support for your current and future project development. If you need to contact us or to receive further information or if you wish to have a meeting with one of our R&D technicians, we will be very happy to meet you. For further information about our services, please visit our website at www.enkisrl.com or contact one of our customer service agents: Mrs. Elena Raza e.raza@enkisrl.com Mrs. Rebecca Sciara r.sciara@enkisrl.com Best Regards Ph. +39 030 2185263 Fax. +39 030 2750239