Draft Guidelines for application of the Unique Identifier (UI) Transmitted by the expert of GRE-IWG-SLR 　　Document DETA-32-07e Draft Guidelines for application of the Unique Identifier (UI) WP29 IWG IWVTA - SG58-22-10 Rev1 Proposal to amend Annex 1 Taking into account: The original proposal in SG58-22-10 Rev1 The proposal in SG58-23-04 (Japan) clarifying the situation concerning extensions to approvals relating to a mix of products having different performance levels. The amendment proposed in DETA-31-04Rev.1 –GRE IWG-SLR Comments noted during the discussion of DETA-31-04Rev.1 –GRE IWG-SLR in the IWVTA -26 Session 09 March 2018. The IWVTA experts agreed with the basic approach proposed by GRE IWG-SLR but suggested that the proposed wording may be difficult to understand by anyone unfamiliar with the detail of the preceding discussions. IWG-SLR was invited to divide the line 5 of the table in Annex 1 into two sections. The following version of the table divides the line 5 into two parts, resulting in the renumbering of the sections. Additionally the table has been reformatted to show the differentiation between the cases applicable to the text of the original series of amendments and a subsequent series.

Case 1: Current Series of Amendments of the Regulation Annex 1: General guidelines on the use of the UI in case of modifications of approved products or of UN Regulations. Case 1: Current Series of Amendments of the Regulation Product status Impact on approval Impact on conventional UN type approval marking Impact on UI marking (when database is available) 1 New product New approval Approval no (’s) issued UN type approval marking(s) on the new product Approval no (‘s) issued and linked to a UI UI marking on the new product 2 Modification of the product with no impact on approval No impact 3 Modification of the product with impact on approval but not exceeding its type definition Extension required 4 Modification of the product which exceeds its type definition New approval no (’s) issued; New UN type approval marking(s) on the new product New approval no (‘s) issued and linked to a new UI New UI marking on the modified product

Case 2 : Update of UN Regulation - New Series of Amendments Annex 1: General guidelines on the use of the UI in case of modifications of approved products or of UN Regulations. Case 2 : Update of UN Regulation - New Series of Amendments Product status Impact on approval Impact on conventional UN type approval marking Impact on UI marking (when database is available) 5 a) No modification to the product. All variants of the product included in the original type approval already comply with the new series of amendments of the UN Regulation Extension of approval with indication of the new series of amendments New UN type approval marking(s) on the un-modified product to indicate the new series of amendment No change to the UI marking b) The product and all or some of its variants  is (are) modified to comply with the new series of amendments to the UN Regulation but does (do)  not exceed its type definition New UN type approval marking(s) on the modified product New UI marking