Cleaveland/Price Motor Operators and Controllers Automation of Overhead, Padmount, and Underground Switches in Distribution and Transmission Applications

Motor Operators Experience designing and manufacturing motor operators since 1981 Designing and manufacturing switch automation motor operators since 1992 Automation products developed in conjunction with utility leaders in automation

Established Firsts Electric operators specifically for both distribution and transmission automation Capability of housing both RTU and radio within the motor operator enclosure Operators with true reciprocating motion through the top of enclosure Ability to be retrofitted to the switches of various manufacturers

Full Line of Switch Automation Products ADMO For overhead distribution and transmission switches PTAD For overhead distribution switches PAD For padmounted switches UAD For underground switches RAD For single phase and three phase hydraulic reclosers HHC Handheld controller for underground switches

Incorporating Critical Features for Automation Reliability Dual power source motor Temperature compensated battery charging Automatic battery testing Automatic load disconnect No-Go function Stall-out timer

ADMO (Automated Distribution Motor Operators) Available Motor Operator Type Application Operating Direction Operating Speed Operating Force BR Distribution Reciprocating .4 sec. 800 – 1400 lbs. BR-T Transmission 1.2 sec. 1200 –1800 lbs. BR-TF .7 sec. 1000 –1600 lbs. BT-D Torsional .4 sec. – 90° rotation 7,500 in. lbs BT-T 1.7 sec. – 90° rotation 17,000 in. lbs. BT-TF 7,500 in. lbs.

Distribution Installations Torsional ADMO type BT-D Reciprocating ADMO type BR

Reciprocating & Torsional Operation

Types of Distribution Switches Operated A. B. Chance D7, AR S&C OmniRupter S&C AldutiRupter Bridges Cooper Kearney KPF Inertia Engineering

Broad Customer Base including: Southern California Edison Mississippi Power Alabama Power Arizona Public Service Florida Power and Light Georgia Power South Carolina Electric and Gas

Transmission Installations Torsional ADMO types BT-T and BT-TF

Types of Transmission Switches Operated Cleaveland/Price Turner SEECO Kearney KPF Joslyn PASCOR MORPAC Southern States USCO

Solar Charging Option for Transmission Switches Operator can be supplied with a solar detection board and fuse kit 80 W. solar panels available with mounting rack Number of panels dependent upon power demand of RTU and radio and number of sun-hours per day Supplemental battery pack available for carry-over days Size (amp-hours) of battery pack dependent upon power demand and the number of carryover days desired

PTAD - Poletop Switch Automation

PTAD Application For distribution switches rated to 38 kV Switch operation without the use of vertical operating pipe Retrofitable to new or existing switches operating with or without vertical operating pipe Adaptable to any switch mounting configuration

Superior Operational Features Constant ready operation state – no mechanism wind-up required Lockout of the motor by using a hotstick from ground level After manual operation, the motor can be re-synchronized with the switch locally or remotely via SCADA True switch position status is always reported

Timesaving Installation and Operation Features No setting of limit switches required during installation No decoupling procedure necessary – the PTAD automatically decouples for manual operation No decoupling procedure required for lockout Decoupling not required to test the motor

Status Indications Provided Switch Open Position Switch Closed Position Remote Status Loss of AC/Charge Alarm Low Battery Alarm No-Go Controller Position Indication

PAD - Padmount Automation Switch Controller for use with ElastaMold and G&W switches

PAD Features Utilizes the proven ADMO control package Multi-way controllers available Adaptable to mount on any padmount switch Provisions for electrical and manual operation Adjustable open & close limits Decoupler / Lock-Out provision Fast and easy installation

PAD on G&W 2-way switch

PAD on S&C 2-way switch

Type of Switches Operated A B Chance Federal Pacific S&C G&W Canada Power Products

UAD – Underground Switch Controllers

UAD Features Utilizes the proven ADMO control package Multi-way controllers available Controller available for pad mounting or submersible in-vault installation Motor adaptable to mount on any underground switch Provisions for electrical and manual operation Simple travel set controls Adjustable open & close limits Lock-Out provision

Type of Switches Operated S&C G&W Elastimold Joslyn Canada Power Products

UAD Operation G&W SF6 Switch Elastimold Vacuum Switch for use with ElastaMold and G&W switches Elastimold Vacuum Switch

Extensive Testing Mechanical life testing Mechanical load testing Extreme heat Surge protection Submersion testing

Underground Switch Handheld Control Submersible Control Safe Out of Vault Switch Operation

RAD – Recloser Automation Retrofit to existing single phase or three phase hydraulic reclosers Easy to install Simple travel set controls Provision for manual operation After manual operation, the motor can be re-synchronized with the switch locally or remotely via SCADA

Why Cleaveland/Price?

Feature Packed Controllers Operates any existing or new switch using existing linkage Compatible with any RTU and communication system Surge and electrostatic protection Safety features Provides electrical and manual operation Stall-out timer with auto-reset Modular electronics Lock-out provisions Thermostatically controlled heater

Sophisticated Battery Management Uses a temperature compensated charging system to maintain battery health Automatic battery testing with load applied for true battery voltage measurement Low battery voltage alarm No-Go function Automatic load disconnect

Status Indications Provided Switch Open Position Switch Closed Position Remote Status Loss of AC/Charge Alarm Low Battery Alarm No-Go

Product Customization Choice of RTU Choice of Communications Means Radio Fiber Cellular Phone Custom Mounting Panels Plug & Play Wiring Assortment of Accessories

Valued Added Options Available Complete automation packages DigitaLogic automatic restoration Battery warmer/cooler to extend battery life Field cable assembly for Lindsey sensors LVA board for simple loss of voltage activation

Fast and Easy Installation Measure Degrees of Rotation or Stroke Drill Two Mounting Holes Cut Operating Pipe to Length Mount ADMO to Pole Attach Operating Pipe to ADMO Operate ADMO Manually & Electrically

Extensive Type Testing Mechanical Life Battery Discharge Surge Withstand Radio Interference Extreme Heat Extreme Cold Condensing Humidity Testing Operations after Loss of AC Test Submersion Tests on in-vault controllers Ice Testing Seismic Test Fault Closing

Real World Testing Extensive environmental testing of motor operators Extreme cold to –50°C Extreme heat Extreme humidity Surge conditions

Automating With Cleaveland/Price One Source Supplier for Automating Overhead, Underground and Padmount Switches Automate any Existing Switch Works with any RTU, any SCADA Protocol Extensive Testing with Years of Experience and Proven Reliability Outstanding Customer Service Customized Automation Packages to Fit Your Needs

Production Tests Each motor operator is tested for torque or force output Each motor operator has an electronic burn-in period End point testing is performed

THE choice for automating switches Cleaveland/Price THE choice for automating switches