ICAO ACP WG-N meeting Use of IP in ARTAS 3rd July 2006 European Organisation for the Safety of Air Navigation

ARTAS ARTAS (ATM Radar Tracker and Server) is conceived as a distributed system composed of a number of identical sub-systems, each with their own domain of Operation, co-operating together. Each sub-system, called an ARTAS Unit, will process all surveillance data reports - at present, these are classical radar reports and, in the future, Mode S and ADS reports as well - so as to form the best estimate of the current air traffic situation.

ARTAS – Current Environment

ARTAS Future environment

ARTAS Technical Environment Mode-S Sub-network ADS S Regional Wide Area Network ATC users ARTAS ATC Centre Military Sensor data Air Situation Picture Router

ARTAS Deployment 1/2

ARTAS Deployment 2/2

ARTAS System presentation SNMP, NTP SNMP, NTP Sensor input Sensor input Sensor input Users Users Adjacent Unit Adjacent Unit A complete Artas system is composed of : 10 stations, 2 FDDI hubs, 2 X terminals, 4 external disks, 2 tape drivers, Broadcast users Broadcast users

ARTAS System presentation (cont’d) Internal LAN (Dual Eth. HUB or Dual FDDI Conc.) MMS node MMS node SRV node SNMP, NTP SNMP, NTP SRV node Sensor input Sensor input RBR node RBR node Users Users Adjacent Unit Adjacent Unit TRK node A complete Artas system is composed of : 10 stations, 2 FDDI hubs, 2 X terminals, 4 external disks, 2 tape drivers, TRK node Broadcast users REC node Broadcast users REC node

ARTAS System presentation (cont’d) The Router Bridge is the only OP CSCI interfacing with the external world. The RBR can use up to 6 LANs. Only the first 2 can be used for Sensor Input. Max 23 USER simultaneously ( 20 Ordinary Users and 3 Adjacent Units or 12 Adjacent Units and 11 Ordinary Users) Router Bridge RADAR LAN A RADAR LAN B BROADCAST LAN NTP LAN SUPERVISION LAN Point-to-Point USER LAN

Protocols used in ARTAS TCP: The RFC 793 IP: RFC 761 Multicast Host Extensions for IP multi-casting: RFC 1112 UDP: RFC 768 PDC (Private Data Channel) NTP: RFC 1305 SNMP: RFC1157

SENSOR INPUT ARTAS supports up two RADAR LANs. Preferred LAN Secondary LAN FDDI (except with V7A1 Linux) and Ethernet LANs are supported.

SENSOR INPUT Sensor information is a multicast message. There are two possible protocol stacks: ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX ÌP UDP ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX UDP/IP MAC/LLC1 Only one protocol stack has to be used.

SENSOR INPUT ASTERIX CAT used: 001 Plots-Local tracks 002 Radar Service Messages 034 Radar Service Messages* 048 Plots-Local tracks* 021 ADS−B message** 023 CSN/ATM ground station service message** 241 RMCDE PROTOCOL * Mode-S stations ** ADS-B Ground stations ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX ÌP UDP ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX

Normal USER connection Normal Users are connected through a POINT-TO-POINT connection The Private Data Channel ( PDC) protocol is on top of TCP layer. ARTAS ARTAS SYSTEM

Normal USER connection ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX ÌP TCP PDC ARTAS

Normal USER connection ASTERIX CAT used: FDPS 032 MINIPLAN messages 062 Track information 065 Service related messages 252 Service related messages Other Normal users 062 Track information 065 Service related messages 063 Sensor information 252 Service related messages 030 Track information 030 Sensor information ARTAS ARTAS SYSTEM

Adjacent Unit connection Adjacent units are connected through a POINT-TO-POINT connection The Private Data Channel ( PDC) protocol is on top of TCP layer. ARTAS UNIT B ARTAS UNIT A WAN

Adjacent Unit connection ARTAS UNIT B ARTAS UNIT A WAN ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX ÌP TCP PDC ASTERIX CAT used: 032 MINIPLAN messages 062 Track information 065 Service related messages 252 Service related messages

Broadcast Service ARTAS Tracks Multicast message Two protocol stacks UDP/IP MAC/LLC1 ARTAS

Broadcast Service MAC/LLC1 UDP/IP ARTAS ASTERIX ASTERIX ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX ÌP UDP ETHERNET or FDDI MAC/LLC1 <not used> ASTERIX MAC/LLC1 UDP/IP ARTAS

Broadcast Service ASTERIX CAT used: 062 Track information 065 Service related messages 063 Sensor information 252 Service related messages 030 Track information 031 Sensor information ARTAS

‘IPAX COMPLIANCE’ “IPAX Compliance”: A destination port uniquely identifies the application in the receiving system that should process the incoming IP packets. ARTAS Requirement: There shall be a default port number* (configurable by means of an MMS parameter) that is written initially to the fields “Port 1” to “Port 4”. For backwards compatibility an operator can choose to change this default port number according to his needs (in the range of [1024, 65535]). Implementation: A sensor is not any longer identified by a PORT NUMBER and there is DEFAULT PORT NUMBER for ALL RADARS. *The default port number would be the port number for ASTERIX in receiving systems.

ARTAS non-Sensors Environment Unique IP PORT NUMBER for the output. At the moment the UDP ports must be in the range [5001,65535]

IPv6 ARTAS is only validate for IPV4.