Pic Pic Pic Pic WOCCS Mid Range Wireless Module P11207 2010 - 1 & 2 Philip Bryan: Project Guide Harris Corporation: Sponsor Pic Pic Pic Pic Ryan Toukatly (EE) Erwan Suteau (EE) Peter Franz (EE) Trey Minarcin (EE) MISSION STATEMENT: The Mid Range wireless module is designed to wirelessly transmit command and telemetry data between a base station and remote unit at a mid range distance. PROJECT PLAN September: Planning Identify Customer Needs Develop Engineering Specifications September/October : Concept Development Brainstorm Concepts Concept Details Comparisons Decision October: System Level Design Risk Assessment Feasibility Analysis November/December: Detailed Design Schematics Circuit Board Bill of Materials January – Assembly/Testing Receive parts Assemble boards Electrical testing Debugging February – System Integration Functionality check Test to specifications May – Field Demo Deliver Technical Paper CONCEPT SELECTION: MULTIPLE FORK ACTUATION USING: / PNEUMATICSCONCEPTS WERE GENERATED INCLUDING: DIRECT SHIFT ATV POWER FEASIBILITY ANALYSIS RESULTS SELECTED CONCEPT: BASED ON SEVERAL KEY LIMITATIONS (TIME, COST, RESOURCES, CUSTOMER SPECIFICATIONS) THE ACTUATION OF THE SHIFT AND RAPID SHIFTING. SYSTEM-ON-CHIP: BASED ON A REQUIRED SHIFTING TORQUE OF 150 IN-LB, AT A 1 INCH RADIUS: →93 PSI IS THE MINIMUM AIR SUPPLY PRESSURE REQUIRED INTERFACE PROTOCOL/CABLE?: SHIFTING TORQUE OF 150 IN-LB, AT A 1 INCH RADIUS: COMMUNICATION PROTOCOL: SHIFT GEARS ANTENNA: THE ATV PCB BOARD THE THE 3.3V MSP430 FROM THE 12V SOLENOID VALVE TEST PLAN SHIFTING TIME: TEST RESULTS CONCLUSIONS/IMPROVEMENTS: LOW. THE ACKNOWLEDGEMENTS: SPECIAL THANKS TO: Peeps Dots Welch’s Fruit Snacks