Estimated implementation time [Bottle Gate] Short Description A new kind of bottle lock mechanism that can avoid using the current bottle end cups. Benefit for consumer This design is intended for avoiding beverage bottle end cups. The design have adantage over the eexisting ones in the fact that as long as the bottle is in a good condition the gate can be re used again since the gate do not get out of the bottle, the bottle can be sealed back after opening manually, it avoids end cup production which lower cost, the bottle does not need tool to be opened, does not add waste to the environment like existing ones, fun and easy to use and so on. For more information https://www.globalinnovationexchange.org/innovation/bottle-gate Technical details Visual Mechanism- This design has simple mechanism. To open one only have to pull out the small handle of the gate. Then the gate will free itself from the grooved bottle having small lock on the inside. The by pulling until the other end the bottle can be opened. For sealing back just push the gate inside to lock it with the inner part of grooved with lock bottle. While drinking the fluid will not spill because the bottle will be 100 percent sailed when it is opened. Investments Risk mitigation Estimated implementation time Cost analysis depends on the bottle We use and will be submitted when The project is accapted. There is no risk concerning the design. This design can be implemented in Matter of days all we need is the mold For production. Andrey