Please leave at least a 25mm margin on all sides to avoid cropping during printing. Remove this text box before submitting. Title J. A. Smith1, M. B. Fields2 1. Company/University name, Department name (if applicable), City, State and post code (if applicable), Country 2. Company/University name, Department name (if applicable), City, State and post code (if applicable), Country INRODUCTION: Get the viewer interested in the issue that you are addressing. Keep background information to a minimum and focus on writing a concise hypothesis of your research work. Placing a picture in the introduction could also convey your idea more clearly to the viewers. RESULTS: Present your results and findings based on the simulation work. Address your hypothesis and present your results in the form of simulated graphics of your model, tables and graphs. Figure 3. Title of the figure Figure 4. Title of the figure Figure 1. Title of the figure Variable Value Units Density 1000 Kg/m3 Dynamic Viscosity 1 Pa.s Diffusion Coefficient 0.5 m2/s Shear Modulus 200 Pa COMPUTATIONAL METHODS: Describe your approach to the problem at hand. It might be a good idea to show the important equations that you are solving for. You may also refer to the physics interfaces that you used for the simulation. This could be a good place to introduce the geometry and describe the conditions that define the problem. Please leave at least a 25mm margin on all sides to avoid cropping during printing. Remove this text box before submitting. Table 1. Title of the table Figure 5. Title of the figure CONCLUSIONS: State whether your hypothesis was supported by your work. Briefly discuss the relevance and impact of your findings to real world applications. You can also mention the future direction of your work. Inlet Fluid 1 Note: Please pay special attention to terminology when describing your use of a Module vs. an Interface of the COMSOL Software. For example, the Electrostatics Interface belongs to the AC/DC Module. Images: PNG files are recommended. Before the final submission, check your poster at 100% zoom to ensure that all images & their text/legend are readable and of good quality. Inlet Fluid 2 Outlet Figure 2. Title of the figure REFERENCES: Author, Article Title, Journal, Volume, Page numbers (year) Author, Article Title, Journal, Volume, Page numbers, (year) Excerpt from the Proceedings of the 2019 COMSOL Conference in Cambridge