Unit II Dr. R. Jayaraj, M.A., Ph.D., UPES.

Slides:



Advertisements
Similar presentations
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
Advertisements

The Costs of Production Chapter 13 Copyright © 2004 by South-Western,a division of Thomson Learning.
Harcourt, Inc. items and derived items copyright © 2001 by Harcourt, Inc. Explaining Supply: The Costs of Production Law of Supply u Firms are willing.
© 2007 Thomson South-Western. The Costs of Production The Market Forces of Supply and Demand – Supply and demand are the two words that economists use.
Copyright©2004 South-Western 13 The Costs of Production.
The Costs of Production   Outline: – –Study how firm’s decisions regarding prices and quantities depend on the market conditions they face – –Firm’s.
The Costs of Production
Copyright © 2004 South-Western/ WHAT ARE COSTS? A Firm’s Objective The economic goal of a firm is to maximize profits.
Chapter 13 The costs of production
 Economists assume goal of firms is to maximize profit  Profit = Total Revenue – Total Cost  In other words: Amount firm receives for sale of output.
THEORY OF FIRM BEHAVIOR
Cost of Production ETP Economics 101.
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
The Costs of Production
Today’s Topic-- Production and Output. Into Outputs Firms Turn Inputs (Factors of Production)
The Costs of Production Chapter 13 Copyright © 2001 by Harcourt, Inc. All rights reserved. Requests for permission to make copies of any part of the work.
Section V Firm Behavior and the Organization of Industry.
The Costs of Production
Production and Costs.
PowerPoint Slides prepared by: Andreea CHIRITESCU
The Costs of Production
The Costs of Production
Copyright©2004 South-Western The Costs of Production.
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
Chapter 13 The Cost of Production © 2002 by Nelson, a division of Thomson Canada Limited.
Chapter The Costs of Production 13. What Does a Firm Do? Firm’s Objective – Firms seek to maximize profits Profits = Total Revenues minus Total Costs.
PowerPoint Slides prepared by: Andreea CHIRITESCU Eastern Illinois University The Costs of Production 1 © 2012 Cengage Learning. All Rights Reserved. May.
Copyright©2004 South-Western 13 The Costs of Production.
CHAPTER 5 COST OF PRODUCTION. PART 1: SHORT RUN PRODUCTION COST Chapter Summary Types of production cost in short run Apply the short run production cost.
Copyright©2004 South-Western 13 The Costs of Production.
5 FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY.
5 FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY.
The Costs of Production 1. What are Costs? Total revenue –Amount a firm receives for the sale of its output Total cost –Market value of the inputs a firm.
MANAGERIAL ECONOMICS COST ANALYSIS. In this chapter, look for answers to production and cost questions: What is a production function? What is marginal.
The Costs of Production. The Market Forces of Supply and Demand Supply and demand are the two words that economists use most often. Supply and demand.
The Costs of Production.  Supply and demand are the two words that economists use most often.  Supply and demand are the forces that make market economies.
The Costs of Production
The Costs of Production
Fixed and Variable Costs
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
Total Revenue, Total Cost, and Profit
Cost of Production ETP Economics 101.
The Costs of Production
The Costs of Production
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
Lesson 6 Production Costs.
Production and Cost in the Firm
The Costs of Production
Background to Supply: Firms in Competitive Markets
Review of the previous lecture
Principals of Economics Law Class
The Costs of Production
Costs: Economics and Accounting
© 2007 Thomson South-Western
The Costs of Production
Lesson 6 Production Costs.
The Costs of Production
FIRM BEHAVIOR AND THE ORGANIZATION OF INDUSTRY
Background to Supply: Firms in Competitive Markets
Chapter 9 Costs.
The Costs of Production
The Costs of Production
Unit 4: Costs of Production
The Costs of Production
The Costs of Production
Presentation transcript:

Unit II Dr. R. Jayaraj, M.A., Ph.D., UPES

The Costs of Production

Production An entrepreneur must put together resources -- land, labour, capital -- and produce a product- people will be willing and able to purchase

Profit, the firm’s objective The economic goal of a firm is to maximize its profit. Profit = Total revenue - Total cost

Total Revenue, Total Cost, and Profit The money a firm receives from the sale of its output. TR = P  Q We saw this is in previous Unit. Total Cost The market value of all the inputs (resources) a firm uses in production.

Explicit and Implicit Costs A firm’s cost of production include explicit costs and implicit costs. Explicit costs are costs that require a direct outlay of money by the firm’s owner(s). Implicit costs are costs that do not require an outlay of money by the firm If some of the resources used in production are provided by the owner(s) of the firm, the firm may not have to pay for them. The market value of such resources is the implicit cost. Implicit costs are included in total cost.

Implicit Costs: Examples You own a restaurant and you work eighteen hours a day in it You could have worked elsewhere and earned a wage. This lost income is an implicit cost You have invested $20,000 of your own savings in your restaurant You could have earned interest had you put that money in a bank instead. This lost interest income is an implicit cost

Economic Profit versus Accounting Profit Economists measure a firm’s economic profit as total revenue minus total cost, which includes both explicit and implicit costs. Accountants measure the accounting profit as the firm’s total revenue minus only the firm’s explicit costs. As a result, accounting profit exceeds economic profit

Figure 1 Economic versus Accountants How an Economist How an Accountant Views a Firm Views a Firm Revenue Economic profit Accounting profit Revenue Implicit costs Total opportunity costs Explicit costs Explicit costs

Economic Profit and Firm Sustainability Non-negative economic profit is essential for the long-run viability of a firm Hungry Helen’s Cookies earns total revenue of $700 per hour and has total explicit costs of $650 per hour (for labor and raw materials) and Total implicit costs of $110 per hour (in wages Helen could have earned as a computer programmer) Accounting profit = $50 per hour. This indicates short-run financial viability Economic profit = – $60 per hour. This indicates a dire long-run future. Dissatisfied with the $50 per hour profit, Helen will eventually shut down the firm and take a programming job

PRODUCTION AND COSTS The Production Function The production function shows the relationship between quantity of inputs used to make a good and the quantity of output of that good.

Table 1 A Production Function and Total Cost: Hungry Helen’s Cookie Factory

Note that the marginal product diminishes as more of the resource is used. This is a common assumption in economics. Marginal Product The marginal product of any input in the production process is the increase in output that arises from one additional unit of that input.

Diminishing marginal product is the property whereby the marginal product of an input declines as the quantity of the input increases. Example: As more and more workers are hired at a firm, each additional worker contributes less and less to production because the firm has a limited amount of equipment.

Diminishing Marginal Product The slope of the production function measures the marginal product of an input, such as a worker. When the marginal product declines, the production function becomes flatter.

Figure 2 Caroline’s Production Function Quantity of Output (cookies per hour) 150 Production function 140 130 120 Note that this production function graph shows diminishing marginal product. 110 100 90 80 70 60 50 40 30 20 10 1 2 3 4 5 Number of Workers Hired

Table 1 A Production Function and Total Cost: Caroline’s Cookie Factory Fixed Cost Variable Cost Number of workers Output (quantity of cookies produced per hour) Marginal product of labor Cost of factory workers Total cost of inputs (cost of factory + cost of workers) 1 2 3 4 5 6 50 90 120 140 150 155 $30 30 $0 10 20 40 60 70 80 50 40 30 20 10 5 Turning these two columns into a graph yields the cost curve. See next slide.

Figure 2 Caroline’s production function and total-cost curve Quantity of Output (cookies per hour) 100 80 60 40 20 160 140 120 (a) Production function (b) Total-cost curve Total Cost 50 40 30 20 10 80 70 60 $90 Production function Total-cost curve Number of Workers Hired 1 2 3 4 5 6 Quantity of Output (cookies per hour) 20 40 60 80 100 120 140 160

THE VARIOUS MEASURES OF COST The Total Cost of production may be divided into fixed costs and variable costs. Fixed costs are those costs that do not vary with the quantity produced. Variable costs are those costs that vary with the quantity produced. TC = FC + VC

The various measures of cost: Conrad’s coffee shop Quantity of coffee (cups per hour) Total Cost Fixed Variable Average Marginal 1 2 3 4 5 6 7 8 9 10 $3.00 3.30 3.80 4.50 5.40 6.50 7.80 9.30 11.00 12.90 15.00 3.00 $0.00 0.30 0.80 1.50 2.40 3.50 4.80 6.30 8.00 9.90 12.00 - 1.00 0.75 0.60 0.50 0.43 0.38 0.33 $0.30 0.40 0.70 0.90 1.10 1.20 $3.30 1.90 1.35 1.30 1.33 1.38 1.43 $0.30 0.50 0.70 0.90 1.10 1.30 1.50 1.70 1.90 2.10 Check that TC = FC + VC

Figure Conrad’s Coffee Shop Total-Cost Curve $15.00 Total-cost curve 14.00 Quantity of coffee (cups per hour) Total Cost 1 2 3 4 5 6 7 8 9 10 $3.00 3.30 3.80 4.50 5.40 6.50 7.80 9.30 11.00 12.90 15.00 13.00 12.00 11.00 10.00 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Average Costs The average cost is also called the per-unit cost. Average costs can be determined by dividing the firm’s total costs by the quantity of output it produces.

Average Costs

Average Fixed and Variable Costs Average Costs Average Fixed Costs (AFC) Average Variable Costs (AVC) Average Total Costs (ATC) We know that TC = FC + VC Therefore, TC/Q = FC/Q + VC/Q Therefore, ATC = AFC + AVC

The various measures of cost: Conrad’s coffee shop Quantity of coffee (cups per hour) Total Cost Fixed Variable Average Marginal 1 2 3 4 5 6 7 8 9 10 $3.00 3.30 3.80 4.50 5.40 6.50 7.80 9.30 11.00 12.90 15.00 3.00 $0.00 0.30 0.80 1.50 2.40 3.50 4.80 6.30 8.00 9.90 12.00 - 1.00 0.75 0.60 0.50 0.43 0.38 0.33 $0.30 0.40 0.70 0.90 1.10 1.20 $3.30 1.90 1.35 1.30 1.33 1.38 1.43 $0.30 0.50 0.70 0.90 1.10 1.30 1.50 1.70 1.90 2.10 Check that ATC = AFC + AVC

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves Costs $3.50 AFC = FC/Q. As FC is constant, FC/Q decreases as Q increases. Therefore, AFC decreases as Q increases 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 AFC 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves Costs AFC decreases as Q increases, AVC increases as Q increases, because of diminishing returns. As ATC = AFC + AVC, ATC is U-shaped: as Q increases, it decreases initially and then begins to increase. $3.50 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 ATC 1.25 AVC 1.00 0.75 0.50 AFC 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves The quantity at which ATC is lowest is called the efficient scale output. Costs $3.50 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 ATC 1.25 For Conrad’s Coffee Shop, the efficient scale is 5 or 6 cups of coffee per hour 1.00 0.75 0.50 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Cost Curves and Their Shapes The average total-cost curve is U-shaped. At very low levels of output average total cost is high because the fixed cost is spread over only the few units that are produced. Average fixed cost declines as output increases. Average variable cost rises as output increases. These features of a firm’s costs explains the U-shape of the ATC curve Recall that ATC = AFC + AVC

Marginal Cost Marginal cost (MC) is the increase in total cost (TC) that arises from an extra unit of production. The increase in cost that arises from an extra unit of production is entirely due to the use of additional raw materials and labor Therefore, marginal cost can also be defined as the increase in total variable cost (VC) that arises from an extra unit of production.

Marginal Cost

The various measures of cost: Conrad’s coffee shop Quantity of coffee (cups per hour) Total Cost Fixed Variable Average Marginal 1 2 3 4 5 6 7 8 9 10 $3.00 3.30 3.80 4.50 5.40 6.50 7.80 9.30 11.00 12.90 15.00 3.00 $0.00 0.30 0.80 1.50 2.40 3.50 4.80 6.30 8.00 9.90 12.00 - 1.00 0.75 0.60 0.50 0.43 0.38 0.33 $0.30 0.40 0.70 0.90 1.10 1.20 $3.30 1.90 1.35 1.30 1.33 1.38 1.43 $0.30 0.50 0.70 0.90 1.10 1.30 1.50 1.70 1.90 2.10 Check that MC = TC/ Q = VC / Q

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves Marginal cost rises with the amount of output produced. This reflects the assumption of diminishing marginal product Costs $3.50 3.25 3.00 2.75 2.50 2.25 MC 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves Costs $3.50 3.25 3.00 2.75 2.50 2.25 MC 2.00 1.75 1.50 ATC 1.25 AVC 1.00 0.75 0.50 AFC 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

Cost Curves and Their Shapes Relationship Between Marginal Cost and Average Total Cost Whenever marginal cost is less than average total cost, average total cost must be decreasing. Whenever marginal cost is greater than average total cost, average total cost must be increasing.

Cost Curves and Their Shapes Relationship Between Marginal Cost and Average Total Cost The marginal-cost curve crosses the average-total-cost curve at the efficient scale. Efficient scale is the quantity that minimizes average total cost.

Figure 4 Conrad’s Coffee Shop Average-Cost and Marginal-Cost Curves Costs $3.50 3.25 3.00 2.75 2.50 2.25 MC 2.00 1.75 1.50 ATC 1.25 1.00 0.75 0.50 0.25 1 2 3 4 5 6 7 8 9 10 Quantity of Output (cups of coffee per hour)

A Typical Firm’s Costs

Figure 5 Cost Curves of a Typical Firm (a) Total-Cost Curve Total Cost $18.00 TC 16.00 14.00 12.00 10.00 8.00 6.00 4.00 2.00 2 4 6 8 10 12 14 Quantity of Output

Figure 5 Cost Curves of a Typical Firm (b) Marginal- and Average-Cost Curves Costs $3.00 2.50 MC 2.00 1.50 ATC AVC 1.00 0.50 AFC 2 4 6 8 10 12 14 Quantity of Output

COSTS IN THE SHORT RUN AND IN THE LONG RUN

COSTS IN THE SHORT RUN AND IN THE LONG RUN For many firms, the division of total costs between fixed and variable costs depends on the time horizon being considered. Because some costs are fixed in the short run and variable in the long run, a firm’s long-run cost curves differ from its short-run cost curves.

Figure 6 Average Total Cost in the Short and Long Run ATC in short run with small factory ATC in short run with medium factory ATC in short run with large factory Cost $12,000 ATC in long run 1,200 Quantity of Cars per Day

Economies and Diseconomies of Scale Economies of scale refer to the property whereby long-run average total cost falls as the quantity of output increases. Constant returns to scale refers to the property whereby long-run average total cost stays the same as the quantity of output increases Diseconomies of scale refer to the property whereby long-run average total cost rises as the quantity of output increases.

Figure 6 Average Total Cost in the Short and Long Run ATC in short run with small factory ATC in short run with medium factory ATC in short run with large factory Cost ATC in long run Economies of scale Diseconomies of scale 1,200 $12,000 1,000 10,000 Constant returns to scale Quantity of Cars per Day

Summary The goal of firms is to maximize profit, which equals total revenue minus total cost. When analyzing a firm’s behavior, it is important to include all the opportunity costs of production.

Summary A firm’s costs reflect its production process. A typical firm’s production function gets flatter as the quantity of input increases, displaying the property of diminishing marginal product. A firm’s total costs are divided between fixed and variable costs. Fixed costs do not change when the firm alters the quantity of output produced; variable costs do change as the firm alters quantity of output produced.

Summary Average total cost is total cost divided by the quantity of output. Marginal cost is the amount by which total cost would rise if output were increased by one unit. The marginal cost always rises with the quantity of output. Average cost first falls as output increases and then rises.

Summary The average-total-cost curve is U-shaped. The marginal-cost curve always crosses the average-total-cost curve at the minimum of ATC. A firm’s costs often depend on the time horizon being considered. In particular, many costs are fixed in the short run but variable in the long run.

Isoquant Analysis

What is Isoquant? An Isoquant shows the various combinations of two inputs (labour and Capital) that can be used to produce a specific level of output. A higher Isoquant refers to a larger output, where as a lower Isoquant refers to a smaller output. If the two variable inputs (capital and labour) are used in production, we are in long run. If the two variable inputs used with other fixed inputs (say land), we would still be in short run.

An isoquant Units of K 40 20 10 6 4 Units of L 5 12 20 30 50 Point on diagram a b c d e Units of capital (K) Units of labour (L)

An isoquant a Units of K 40 20 10 6 4 Units of L 5 12 20 30 50 Point on diagram a b c d e Units of capital (K) Units of labour (L)

An isoquant a Units of K 40 20 10 6 4 Units of L 5 12 20 30 50 Point on diagram a b c d e Units of capital (K) b Units of labour (L)

An isoquant a Units of K 40 20 10 6 4 Units of L 5 12 20 30 50 Point on diagram a b c d e Units of capital (K) b c d e Units of labour (L)

Characteristics of Isoquant Curves Isoquants further from the origin represent greater output levels There is a different isoquant for every output level the firm could possibly produce, with isoquants further from the origin indicating higher levels of output. Isoquants slope down to the right Along a given isoquant, the quantity of labour employed is inversely related to the quantity of capital employed, so isoquants have negative slopes. Isoquants do not intersect Since each isoquant refers to a specific level of output, no two isoquants intersect, for such an intersection would indicate that the same combination of resources could, with equal efficiency, produce two different amounts of output.

Isoquants are usually convex to the origin Finally, isoquants are usually convex to the origin, meaning that the slope of the isoquant gets flatter down along the curve. To understand why, keep in mind that the slope of the isoquant measures the ability of additional units of one resource — in this case, labour (L) — to substitute in production for another — in this case, capital (K). As we said, the isoquant has a negative slope. The slope of the isoquant is the marginal rate of technical substitution (or MRTS), defined between any two resources as: MRTS = DK / DL

Marginal rate of substitution Marginal rate of substitution –MRTSLK indicates the rate at which additional units of labour (ΔL) can be substituted for fewer units of capital (–ΔK) while keeping output (TP) constant. When much capital and little labour are used, the marginal productivity of labour is relatively great and the marginal productivity of capital is relatively small, so one unit of labour will substitute for a relatively large amount of capital.

Diminishing marginal rate of factor substitution MRS = DK / DL DK = 2 MRS = 2 h DL = 1 Units of capital (K) isoquant Units of labour (L)

Diminishing marginal rate of factor substitution MRS = 2 MRS = DK / DL DK = 2 h DL = 1 Units of capital (K) j MRS = 1 DK = 1 k DL = 1 isoquant Units of labour (L)

An isoquant map

An isoquant map Units of capital (K) I5 I4 I3 I2 I1 Units of labour (L)

Returns to scale

Constant returns to scale 600 Units of capital (K) b 500 400 a 300 200 Units of labour (L)

Increasing returns to scale (beyond point b) 700 600 Units of capital (K) b 500 400 a 300 200 Units of labour (L)

Decreasing returns to scale (beyond point b) 500 Units of capital (K) b 400 a 300 200 Units of labour (L)

Isocosts

An isocost Assumptions PK = £20 000 W = £10 000 TC = £300 000 Units of capital (K) Units of labour (L)

An isocost Assumptions PK = £20 000 W = £10 000 TC = £300 000 Units of capital (K) b c TC = £300 000 d Units of labour (L)

The least-cost method of production

Finding the least-cost method of production Assumptions PK = £20 000 W = £10 000 TC = £200 000 Units of capital (K) TC = £300 000 TC = £400 000 TC = £500 000 Units of labour (L)

Finding the least-cost method of production TPP1 s t TC = £500 000 Units of capital (K) TC = £400 000 r Units of labour (L)

The Cobb-Douglas Production Function

In economics, the Cobb-Douglas functional form of production functions is widely used to represent the relationship of an output to inputs. It was proposed by Knut Wicksell (1851-1926), and tested against statistical evidence by Charles Cobb and Paul Douglas in 1900-1928. For production, the function is Y = ALαKβ, where: Y = total production (the monetary value of all goods produced in a year) L = labor input K = capital input A = total factor productivity α and β are the output elasticities of labor and capital, respectively. These values are constants determined by available technology.

Output elasticity measures the responsiveness of output to a change in levels of either labor or capital used in production, ceteris paribus. For example if α = 0.15, a 1% increase in labor would lead to approximately a 0.15% increase in output. Further, if: α + β = 1, the production function has constant returns to scale. That is, if L and K are each increased by 20%, Y increases by 20%. If α + β < 1,returns to scale are decreasing, and if α + β > 1, returns to scale are increasing

The Cobb-Douglas Production Function Y = AKL(1-)

History Developed by Paul Douglas and C. W. Cobb in the 1930’s

The General Problem An increase in a nation’s capital stock or labor force means more output. Is there a mathematical formula that relates capital, labor and output?

The General Form

An Illustration The Cobb-Douglas Production Function

An Illustration The Cobb-Douglas Production Function

An Illustration A =3 L =10 K =10 The Cobb-Douglas Production Function

RETURNS TO SCALE DIMINISHING RETURNS REFER TO RESPONSE OF OUTPUT TO AN INCREASE OF A SINGLE INPUT WHILE OTHER INPUTS ARE HELD CONSTANT. WE HAVE TO SEE THE EFFECT BY INCREASING ALL INPUTS. WHAT WOULD HAPPEN IF THE PRODUCTION OF WHEAT IF LAND, LABOUR, FERTILISERS, WATER ETC,. ARE ALL DOUBLED. THIS REFERS TO THE RETURNS TO SCALE OR EFFECT OF SCALE INCREASES OF INPURTS ON THE QUANTITY PRODUCED.

CONSTANT RETURNS TO SCALE THIS DENOTES A CASE WHERE A CHANGE IN ALL INPUTS LEADS TO A PROPORTIONAL CHANGE IN OUTPUT. FOR EXAMPLE IF LABOUR, LAND CAPITAL AND OTHER INPUTS DOUBLED, THEN UNDER CONSTANT RETURNS TO SCALE OUTPUT WOULD ALSO DOUBLE.

INCREASING RETURNS TO SCALE THIS IS ALSO CALLED ECONOMIES OF SCALE. THIS ARISES WHEN AN INCREASE IN ALL INPUTS LEADS TO A MORE-THAN-PROPORTIONAL INCREASE IN THE LEVEL OF OUTPUT. FOR EXAMPLE AN ENGINEER PLANNING A SMALL SCALE CHEMICAL PLANT WILL GENERALLY FIND THAT BY INCREASING INPUTS OF LABOUR, CAPITAL AND MATERIALS BY 10% WILL INCREASE THE TOTAL OUTPUT BY MORE THAN 10%.

DECREASING RETURNS TO SCALE THIS OCCURS WHEN A BALANCED INCREASE OF ALL INPUTS LEADS TO A LESS THAN PORPORTIONAL INCREASE IN TOTAL OUTPUT. IN MANY PROCESS, SCALING UP MAY EVENTUALLY REACH A POINT BEYOND WHIH INEFFICIENCIES SET IN. THESE MIGHT ARISE BECAUSE THE COSTS OF MANAGEMENT OR CONTROL BECOME LARGE. THIS WAS VERY EVIDENT IN ELECTRICITY GENERATION WHEN PLANTS GREW TOO LARGE, RISK OF PLANT FAILURE INCREASED.

An Illustration

Constant Returns to Scale

Doubling Capital Diminishing Returns to Scale

Diminishing Returns to Scale Reduction in Substitution variable

Increasing returns to Scale