3D Printing a Susceptibility Assay for Multidrug-Resistant Bacteria Ryan S. Han, Ghazaleh Haghiashtiani, Michael C. McAlpine Chem Volume 1, Issue 3, Pages 346-348 (September 2016) DOI: 10.1016/j.chempr.2016.08.012 Copyright © 2016 Elsevier Inc. Terms and Conditions
Figure 1 There Is Growing Interest in Utilizing Microorganisms, Including Bacteria, in 3D Printing Processes for a Variety of Novel Applications (A) Application map of current and future promising outcomes involving the combination of bacteria and 3D printing. (B) Production schematic of the 3D-printed susceptibility assay. Reprinted with permission from Glatzel et al.1 (C) 3D printing can produce spatially constrained bacterial colonies (scale bar represents 20 μm).9 (D) 3D-printed bio-hybrid fabrics. This image is used with permission under the CC BY-NC-ND 3.0 license (https://creativecommons.org/licenses/by-nc-nd/3.0/). © 2012 Tangible Media Group / MIT Media Lab (http://tangible.media.mit.edu/project/biologic/).10 Chem 2016 1, 346-348DOI: (10.1016/j.chempr.2016.08.012) Copyright © 2016 Elsevier Inc. Terms and Conditions