FS 309 14” Maximum Blade Capacity 9 HP Honda engine Weight – 141Lbs Overall Dimensions: 33.5” High 38.4” Long (pointer up) 19.9” Wide

FS 309 Engine Mounting System Patent pending vibration isolation system. Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators Design strongly reduces vibration at handles Increases production

FS 309 Column System Single column, construction Raise/lower system located inside the tube Can be easily dismounted to fit a small van or even a car Handle can be adjusted in numerous working position

FS 309 Blade Shaft System Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings Minimum of 250 hour maintenance intervals Isolated mounting reduces overall vibration

FS 309 Frame Design Frame and engine platform design maintains operator handle and hand wheel at same position when the blade is raised or lowered Improves stability and reduces flexing when sawing Right rear wheel can be pulled out for increased stability

FS 309 Operator Handles Operator handle design allows three dimensional adjustment for optimum operator comfort and controllability Can be adjusted up, down, left, and right.

FS 309 Blade Guard Steel blade guard with water nozzles to control flow Front nose can be lifted Bolt protection Left hand cutting capacity only

FS 309 Water Tank Large opening for easy filling 17 Liter (4.5 Gallon) Capacity giving 17 min autonomy Snaps on and off integrated roll cage Quick disconnect to blade guard

FS 400 18” (450mm) Maximum blade capacity. 13 HP Honda engine options.

FS 400 Depth gauge can be adjusted for different diameter blades.

FS 400 Standard lift bail for easy loading and unloading.

FS 400 Intergraded water tank with garden hose adapter for operation with other water supply.

FS 400 Handles adjust to various heights for operator comfort.

FS 400 Screw feed handle lowers for transportation. Gas spring assist reduces force needed to raise and lower blade in and out of cut.

FS 413 450mm (18”) Maximum Blade Capacity 13 HP Honda engine Weight – 121 KG (266 Lbs) Overall Dimensions: 1,041mm (41”) High 1,499mm (59”) Long 654mm (25-3/4”) Wide

FS 413 Engine Mounting System New patent pending vibration isolation system. Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators Design reduces vibration at handles up to 78% !!! Contributes to increased production

FS 413 Power Drive System 12 groove poly “V” belt drive contributes to reduced vibration Back side type belt tensioning is easier to adjust Increased belt contact with sheaves assists in transferring more horsepower to the blade shaft

FS 413 Blade Shaft System Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings Minimum of 250 hour maintenance intervals Isolated mounting reduces overall vibration

FS 413 Frame Design Frame and engine platform design maintains operator console at same position when the blade is raised or lowered Improves stability and reduces flexing when sawing

FS 413 Operator Console Engine throttle and emergency off button located on console for operator convenience New blade depth gauge is easier to adjust with increased durability Tach/Hour meter is recessed into console to reduce possibility of damage

FS 413 Operator Console Feed handle with positive lock folds down to reduce possibility of damage during transportation Patent pending spring assist raise/lower feature reduces force needed to raise and lower saw into cut.

FS 413 Integrated Lift Bail Integrated lift bail with roll cage design protects engine when transporting or lifting. Also used as mounting platform for water tank.

FS 413 Water Tank Large opening for easy filling 25 Liter (6.6 Gallon) Capacity Snaps on and off integrated roll cage Quick disconnect to blade guard

FS 500 Series 18”, 20”, and 24” Blade capacity 13 Hp, 20 HP, and 24 HP Honda engine options Weight –274 Lbs to 335 Lbs Overall Dimensions: 42” High 66” Long 26” Wide

FS 500 Engine Mounting System Patent pending vibration isolation system. Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators Design reduces vibration at handles up to 78% !!! Contributes to increased production

FS 500 Power Drive System 16 groove poly “V” belt drive contributes to reduced vibration Back side type belt tensioning is easier to adjust Increased belt contact with sheaves assists in transferring more horsepower to the blade shaft

FS 500 Blade Shaft System Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings Minimum of 250 hour maintenance intervals Isolated mounting reduces overall vibration

FS 500 Hydrostatic Differential Drive System Differential style drive system eliminates drive gears to wheels. Self contained system eliminates slipping and allows for better control when sawing Reduced maintenance

FS 500 Frame Design Frame and engine platform design maintains operator console at same position when the blade is raised or lowered Improves stability and reduces flexing when sawing

FS 500 Operator Console Engine throttle and emergency off button located on console for operator convenience New blade depth gauge is easier to adjust with increased durability Tach/Hour meter is recessed into console to reduce possibility of damage Feed handle with positive lock folds down to reduce possibility of damage during transportation

FS 500 Operator Console Key switch for starting engine Engine throttle controls engine speed Forward/reverse lever controls saw direction and speed Hydrostat engage/disengage lever allows saw to be free wheeled Patent pending spring assist raise/lower feature reduces force needed to raise and lower saw into cut.

FS 500 Blade Guard Cast aluminum blade guard with integrated handle for easier transportation Slip on style with locking bolt is easier to remove Steel bushings and bearings strengthens front nose hinge assembly which reduces excessive noise and vibration Water feed system is simple and easily serviced

FS 500 Integrated Lift Bail Integrated lift bail with roll cage design protects engine when transporting or lifting. Also used as mounting platform for water tank.

FS 500 Water Tank Large opening for easy filling 25 Liter (6.6 Gallon) capacity Snaps on and off integrated roll cage Quick disconnect to blade guard