©2016 Power Sensors Ltd. www.PQube3.com PQube® 3 Standard Pre-Wired Packages for quick and easy installation PQube 3-in-a-Box PQ3iaB-Rugged - Wall-mount – Indoor/Outdoor package for wall mounting applications - Pole-mount – Indoor/Outdoor package for pole mounting applications PQ3iaB-Portable - Portable indoor package with pluggable connections for shorter term monitoring PQube 3 Rack Mount - Single-phase rack-mount packages for data centers and substations ©2016 Power Sensors Ltd. www.PQube3.com

©2016 Power Sensors Ltd. www.PQube3.com PQ3iaB–Rugged-Wall-Mount Indoor/Outdoor Wall-mount package PQube 3 Power Analyzer, pre-packaged in an IP44 rated rugged polycarbonate indoor/outdoor wall-mount enclosure Hinged window for color touchscreen display viewing or access Quick connect terminal blocks for easy field wiring Voltage measurement range 100~480Vac Eight current channels - 333mV or ±10V peak Relay output, analog and digital inputs PQube 3 powered from measured voltage, and comes with 1-hour battery backup Just drill holes for your conduit or cable glands, connect wiring, and you're ready to go Internal enclosure temperature rating: -20 to +60°C ©2016 Power Sensors Ltd. www.PQube3.com

©2016 Power Sensors Ltd. www.PQube3.com PQ3iaB–Rugged-Pole-Mount Outdoor Pole-mount package Essentially the same package as the rugged wall-mount Comes with stainless-steel pole mount brackets and straps No viewing window on enclosure ©2016 Power Sensors Ltd. www.PQube3.com

©2016 Power Sensors Ltd. www.PQube3.com PQ3iaB–Portable Portable Indoor Package PQube 3 Power Analyzer pre-packaged and pre-wired in an indoor polycarbonate enclosure with hinged window and handle. Pluggable connections for easy field wiring. Voltage measurement range 100~480Vac Eight current channels – 333mV or ±10V peak Relay output, analog and digital inputs PQube 3 powered from measured voltage (360~480Vac), or 24Vdc input plug (100-240Vac:24Vdc power supply provided). 30-minute internal battery backup for PQube 3 Fused voltage cables with alligator clips included Internal enclosure temperature rating: -20 to +50°C ©2016 Power Sensors Ltd. www.PQube3.com

©2016 Power Sensors Ltd. www.PQube3.com PQ3iaB– Accessories Remote Antenna Mounting Bracket This anodized-aluminum bracket lets you mount your Precision GPS Receiver and your 4G Cell Modem antennas almost anywhere. It comes with stainless-steel screws and washers for mounting to any wall. Also included is a stainless-steel strap for poles from 2 to 3.5 inches (5 to 9cm) diameter. Mounting on a bigger pole? Order the optional pole-mount PMB-SS-00, and you'll get a special stainless-steel sharp-toothed adapter, and a stainless-steel strap for poles up to 14 inches (36cm) diameter Antenna and GPS Receiver cables Indoor and outdoor rated cables for remote mounting your cellular antennas and GPS receivers ©2016 Power Sensors Ltd. www.PQube3.com

©2016 Power Sensors Ltd. www.PQube3.com PQube 3 Rack-Mount packages Single-Phase Rack-Mount package A good choice for data centers and substations. PSL can supply single-phase rack mounts with plug-in connectors for pairs of PQube 3’s (DSSP), or just a single PQube 3 (SSSP). ©2016 Power Sensors Ltd. www.PQube3.com