Basic (cost effective) Load/Current Logging,… for 90% of your needs! Electrocorder Basic (cost effective) Load/Current Logging,… for 90% of your needs!

Electrocorder So why spend 1,000s? >90% of issues are basic loading problems. <10% involve issues with flicker, harmonics or fast transients. So why spend 1,000s?

What are these common ‘basic issues’? Poor voltage due to (self) overloading. Need to monitor load versus capacity. Need to reduce energy via auditing. Need to peak lop.

Our Philosophy Why use £10k worth of kit for simple issues when you can use £1k? Why risk damage, theft, wear & tear; users need a lot of training,….. Use cost effective loggers to filter your issues. 9/10 of your loggers should be Electrocorders. The main selling point, is that Electrocorders are very cost effective, you can have 10 or 20 units for the price of a single Fluke logger! Use this to buy bulk, allowing users to quickly and easily address issues and complaints, then only use expensive high-end loggers once you have established the problem issue being reported need it.

If you have these 90%+ of ‘basic loading or capacity’ issues… Then spend wisely and invest in an Electrocorder Current Logger:- CT-3A-RS (0.5A to 400A) EC-3A-RS (4A to 3kA) Most, the majority, of electrical power issues can be dealt with using an Electrocorder.