A Crash Course in Radio Astronomy and Interferometry: 2 A Crash Course in Radio Astronomy and Interferometry: 2. Aperture Synthesis James Di Francesco National Research Council of Canada North American ALMA Regional Center – Victoria (thanks to S. Dougherty, C. Chandler, D. Wilner & C. Brogan)

Output of a Filled Aperture Aperture Synthesis Output of a Filled Aperture Signals at each point in the aperture are brought together in phase at the antenna output (the focus) Imagine the aperture to be subdivided into N smaller elementary areas; the voltage, V(t), at the output is the sum of the contributions DVi(t) from the N individual aperture elements:

Aperture Synthesis: Basic Concept The radio power measured by a receiver attached to the telescope is proportional to a running time average of the square of the output voltage: Any measurement with the large filled-aperture telescope can be written as a sum, in which each term depends on contributions from only two of the N aperture elements Each term áDViDVkñ can be measured with two small antennas, if we place them at locations i and k and measure the average product of their output voltages with a correlation (multiplying) receiver

Aperture Synthesis: Basic Concept If the source emission is unchanging, there is no need to measure all the pairs at one time One could imagine sequentially combining pairs of signals. For N sub-apertures there will be N(N-1)/2 pairs to combine Adding together all the terms effectively “synthesizes” one measurement taken with a large filled-aperture telescope Can synthesize apertures much larger than can be constructed as a filled aperture, giving very good spatial resolution

A Simple 2-Element Interferometer Aperture Synthesis A Simple 2-Element Interferometer What is the interferometer response as a function of sky position, l = sina ? In direction s0 (a = 0) the wavefront arriving at telescope #1 has an extra path b × s0 = b sinq to travel relative to #2 The time taken to traverse this extra path is the geometric delay, tg = b × s0/c This delay is compensated for by inserting a signal path delay for #2 equivalent to tg

Response of a 2-Element Interferometer Aperture Synthesis Response of a 2-Element Interferometer At angle a, a wavefront has an extra path x = u sina = ul to travel Expand to 2D by introducing b orthogonal to a, m = sinb, and v orthogonal to u, so that in this direction the extra path y = vm Write all distances in units of wavelength, x º x/l, y º y/l, etc., so that x and y are now numbers of cycles Extra path is now ul + vm V2 = V1 e-2pi(ul+vm)

Aperture Synthesis Correlator Output The output from the correlator (the multiplying and time-averaging device) is: For (l1¹l2, m1¹m2) the above average is zero (assuming mutual sky), so

The Complex Visibility Aperture Synthesis The Complex Visibility Thus, the interferometer measures the complex visibility, V, of a source, which is the FT of its intensity distribution on the sky: u,v are spatial frequencies in the E-W and N-S directions, are the projected baseline lengths measured in units of wavelength, i.e., B/l l, m are direction cosines relative to a reference position in the E-W and N-S directions (l = 0, m = 0) is known as the phase center the phase f contains information about the location of structure with spatial frequency u,v relative to the phase center

The Complex Visibility Aperture Synthesis The Complex Visibility This FT relationship is the van Cittert-Zernike theorem, upon which synthesis imaging is based It means there is an inverse FT relationship that enables us to recover I(l,m) from V(u,v): The correlator measures both real and imaginary parts of the visibility to give the amplitude and phase: A=|V | f

Aperture Synthesis The Primary Beam The elements of an interferometer have finite size, and so have their own response to the radiation from the sky This results in an additional factor, A(l,m), to be included in the expression for the correlator output, which is the primary beam or normalized reception pattern of the individual elements Interferometer actually measures the FT of the sky multiplied by the primary beam response Need to divide by A(l,m) to recover I(l,m), the last step of image production Primary Beam FWHM is the “Field-of-View” of a single-pointing interferometric image

Jean Baptiste Joseph Fourier 1768-1830 Aperture Synthesis The Fourier Transform Fourier theory states that any signal (including images) can be expressed as a sum of sinusoids Jean Baptiste Joseph Fourier 1768-1830 signal 4 sinusoids sum (x,y) plane and (u,v) plane are conjugate coordinate systems I(x,y) V(u,v) = FT{I(x,y)} the Fourier Transform contains all information of the original

Some 2-D Fourier Transform Pairs Aperture Synthesis Some 2-D Fourier Transform Pairs I(x,y) Amp{V(u,v)} Constant  Function Gaussian Gaussian narrow features transform to wide features (and vice-versa)

More 2-D Fourier Transform Pairs Aperture Synthesis More 2-D Fourier Transform Pairs I(x,y) Amp{V(u,v)} elliptical Gaussian elliptical Gaussian Disk Bessel sharp edges result in many high spatial frequencies

Aperture Synthesis Amplitude and Phase complex numbers: (real, imaginary) or (amplitude, phase) amplitude tells “how much” of a certain spatial frequency component phase tells “where” this component is located I(x,y) Amp{V(u,v)} Pha{V(u,v)}

Aperture Synthesis Amplitude and Phase complex numbers: (real, imaginary) or (amplitude, phase) amplitude tells “how much” of a certain spatial frequency component phase tells “where” this component is located I(x,y) Amp{V(u,v)} Pha{V(u,v)}

Picturing the Visibility: Fringes Aperture Synthesis Picturing the Visibility: Fringes The FT of a single visibility measurement is a sinusoid with spacing 1/u = l/B between successive peaks, or “fringes” Build up an image of the sky by summing many such sinusoids (addition theorem) FT scaling theorem shows: Short baselines have large fringe spacings and measure large-scale structure on the sky Long baselines have small fringe spacings and measure small-scale structure on the sky - + - + - + - Fringe Sign l/B rad. Source brightness

Aperture Synthesis Aperture Synthesis sample V(u,v) at enough points to synthesize the equivalent large aperture of size (umax,vmax) 1 pair of telescopes  1 (u,v) sample at a time N telescopes  number of samples = N(N-1)/2 fill in (u,v) plane by making use of Earth rotation: Sir Martin Ryle, 1974 Nobel Prize in Physics reconfigure physical layout of N telescopes for more Sir Martin Ryle 1918-1984 2 configurations of 8 SMA antennas 345 GHz Dec = -24 deg

Next: Interferometric Imaging