Multi-Gear Tire Lock

Outline Background Product Introduction Installment

Background Tires are one of the most important component for vehicle. In the recent years, because the cost of material raised up rapidly and the tires can easily be stolen and resold, the rate of losing tires becomes higher and higher. With the above condition, DEFEND GROUP develops a brand new product, which can prevent thieves stealing the tires from the cars.

Product introduction Use the combination of gears, which is hard for thieves to decipher The structure with over 32 combination ways After installing, there will be 2 parts Lock body  Tighten-up on the tires Gear-key  The lock body can’t be unlocked without the gear-key

Product introduction Spec. of Tire Lock Features Specification Unit Material Stainless Steel 420J2 none Volume 57.11 cm³ Pitch M12x1.5 mm Total length of bolt 34.6 Diameter 30 Permutation of gears Over 32Ways

Product introduction Tire Lock Diagram Lock Body Gear-Key

Installment 1. Use the socket wrench to slacken the original nut

Installment 2. Roll in the lock body

Installment 3. Use the gear-key and 21mm socket wrench to tight up the lock body

Installment 4.Use gear-key (bottom) to tight up the dust cover

Installment 5. Done

Thanks for your attention