Cochran Consulting, Inc. 21 March 2016 Cochran Consulting, Inc. Introduction CPU Module C1 Imperial Displays

Introduction Reviewing the PowerPoint “LifeguardDisplaysModules” first will make this easier to understand. For the CPU C1 Module Display unit, there can be one primary screen and one alternate screen. (To see what the various screens show refer to the User Manual or Tutorial for the specific CPU Module.) Tapping or bumping the Display Module case will sequence through the screens. If the Primary screen is currently showing, it will change to the alternate screen showing more dive information. The Alternate screen will revert back to the Primary screen after four seconds. This time is called “Screen Dwell Time” and can be changed by the user. Note: when case is tapped or bumped, the Taclite will turn on and the Alternate Screen will be shown at the same time. Note: When the case is tapped or bumped, the Taclite will turn on and the Alternate Screen will be shown at the same time. Note: Oxygen Toxicities (CNS and POTU) computations and displays can be enabled or disabled by modifying the Configuration. Note: The number of gasses shown depends on the number of switches selected Note: The Screens shown here may depend on the specific algorithm selected. The following Displays are unique to the Imperial C1 CPU Module.

Cochran Consulting, Inc. ISO 9001:2008 Cochran Consulting 972.644.6284 1758 Firman Drive Richardson, TX 75081 Websites: www.DiveCochran.com www.CochranMilitary.com www.CochranConsulting.com