Quickly Determine Wind Loading for Stadium Safety ANSYS in Action Use ANSYS CFD to determine pressures exerted by the wind on the structure’s various elements. Use ANSYS Workbench to easily transfer pressure values to ANSYS Mechanical for modal analysis. Maximizing Passive Safety Estádio Nacional Mané Garrincha required massive renovations to ensure it was ready for the 2014 FIFA World Cup. Engineers needed  to validate the safety of the stadium design from a wind-loading perspective in much less time (15 days) than would be required for wind-tunnel testing. Key Results Multiphysics allowed engineers to recommend changes to improve safety which were adopted by the designers. The stadium hosted 7 matches of the 2014 FIFA World Cup Brazil and it will host football games for the 2016 Summer Games to be held in Brazil. ANSYS Advantage V9 I1 – Knowling the Score http://www.ansys.com/About+ANSYS/ANSYS+Advantage+Magazine/Past+Issues/Knowing+the+Score Reduced costs by 1/3 over wind-tunnel tests Required 1/10 the time of wind-tunnel tests “ANSYS multiphysics allowed evaluation of a number of different design changes to address a rotating mode problem. The architectural design incorporated these changes, and the structure was completed in 2013.” Paulo de Mattos Pimenta Professor Polytechnic School at University of São Paulo The work was performed under the auspices of Maruska Holanda (NOVACAP) and Pedro Almeida. CFD simulation and support courtesy ESSS.