Learning Objectives • Add drawing sheets to a project using the Sheet tool. • Add views to the drawing sheet. • Modify view properties of the drawing sheet. • Add schedules to the drawing sheet. • Modify the building model on the drawing sheet. • Create Duplicate Dependent Views. • Print drawing sheets and project view.

CREATING DRAWING SHEETS Adding a Drawing Sheet to a Project Ribbon: View > Sheet Composition > New Sheet Figure 1 Selecting the title block from Autodesk Revit’s library

Figure 2 Sheet view with the selected title block Figure 3 Entering the project related information in the Instance Parameters table of the Instance Properties dialog box

Adding Views to the Drawing Sheet Ribbon: View > Sheet Composition > View Figure 4 Selecting the view to be added to the drawing sheet from the Views dialog box

Figure 5 Sheet view with the selected title block Figure 6 Parameters in the label line of the viewport

Modifying the View Properties Figure 7 Properties Palette for the viewport Figure 8 Partial view of the Type Properties dialog box for the viewport

Panning the Viewports Added in the Sheet Rotating the Viewports in the Sheet Adding Schedules to the Drawing Sheet Figure 9 Schedule with controls added to a drawing sheet

Figure 10 The schedule table split into two sections

DUPLICATE DEPENDENT VIEWS Also called multiple views Are dependent on the original view from which they are created Creating Dependent Views Figure 11 The primary view

Figure 12 The left dependent view showing the left portion of the drawing with crop regions Figure 13 The right dependent view showing the right portion of the drawing with crop regions

Adding Matchline to the Dependent Views Figure 14 Matchline showing the area where you want to split the drawing

PRINTING IN Autodesk Revit Architecture PRINTING DRAWING SHEETS AND PROJECT VIEWS Figure 15 The Print dialog box

Selecting and Modifying the Printer Settings Figure 16 The dialog box for the selected laser printer Figure 17 The options of the selected printer Creating a Print File

Setting the Print Range Figure 18 The View/Sheet Set dialog box displaying the created views and sheets

Using the Print Setup Dialog Box Application Menu: Print > Print Setup Figure 19 The Print Setup dialog box

Previewing the Print Setup Figure 20 Previewing the print settings using the Print Preview tool

Tutorial 1 In this tutorial, you will create a drawing sheet for the Apartment 1 project created in Tutorial 2 of Chapter 12, and then add the first floor plan, north elevation, longitudinal section, room schedule, and door schedule to the sheet, as shown in Figure 21. Figure 21 Sketch sheet layout for creating a drawing sheet for the Apartment 1 project

The following steps are required to complete this tutorial: Add a sheet using the New Sheet tool, by loading the specified titleblock. Add the project information in the sheet titleblock, refer to Figure 22. Figure 22 Project information in the titleblock of the sheet view

Add views to the sheet view and compose the drawing sheet, refer to Figure 23. Figure 23 Project views added to the drawing sheet view

Modify the visibility settings of the added views, using the Activate View tool. Add schedules to the sheet. Edit the schedules to compose them on the sheet, refer to Figure 24. Figure 24 Using the Split Schedule Table tool to split the table into two parts