Introducing the new generation MASTERColour CDM Elite mini lamps MASTERColour CDM-Tm Elite Mini GU6.5 35W/930 new generation Concise technical datasheet A new generation 35W mini lamp with the latest Elite technology will replace the existing generation… Elite

Features and improvements: The latest Elite burner technology will bring Elite performance: CRI = 90 increased lumen output +15% increased lumen maintenance +10% increased lifetime: +25% improved visible red rendering Miniaturised design in standard GU6.5 socket Open system, works with all electronic 35W gears with end-of-life protection Dimensions CDM-Tm Elite Mini GU6.5 35W/930 new generation Commercial specifications Benefits Elite provides a unique combination of: excellent quality of sparkling light lowest Total Cost of Ownership (TCO) - more lumen output can reduce number of light points - longer life reduces relamping costs miniaturised size provides more freedom in luminaire design existing GU6.5 luminaires can be used(*) CDM-Tm Elite Mini GU6.5 35W/930 value lumen output3.800 real lamp power (W)39 efficacy (lm/W)97 CRI hr 91% hr 83% hr 80% hr75% survival 95% (hr)9.000 survival 90% (hr) survival 80% (hr) survival 50% (hr) Dimensions lamp mm D max L max C nom CDM-Tm Elite Mini GU6.5 35W/ Naming12nc = GPCEOC MASTERColour CDM-Tm Elite Mini GU6.5 35W/ HID-PV m 35 /S CDM V 50/60Hz HID-PV m 35 /I CDM V 50/60Hz HID-PV C 35 /S CDM V 50/60Hz HID-PV C 35 /I CDM V 50/60Hz Ordering data lamp and gear CDM-Tm Elite Mini GU6.5 35W/930 – new generation preliminary technical data Lamp dimensions comply with IEC Dimensions of the new generation lamp are same as the previous generation. Also the 20W GU6.5 has same dimensions. (*) in some cases existing reflectors might need adaption to get maximum LOR and optimal light distribution. Above specs are desing targets. Actual values may differ at time of commercial release.

Ordering data lamp and gear When will this new mini lamp be available? The new lamp will be commercially available from June 7, Will the new lamp replace the existing Elite Mini GU6.5 35W/930? Yes the new lamp will replace the existing Elite mini GU6.5 35W/930 lamp. No change in luminaire is needed (a check on optics is advisable for small beam angles in combination with horizontal burning position). Can the new Elite Mini GU6.5 35W/930 also run on EM gear? No, because use of EM gear is not safe at end of life. The lamp is designed to run only on EL gear with end-of-life protection. This can be mini gear or standard 35W gear. Can this lamp replace a GU6.5 35W lamp from another brand? Yes, this new GU6.5 35W lamp is open and standard. That means it will fit into existing luminaires and operate on any EL gear that follows IEC standards. This new lamp is an absolute best-in-class performer on critical items such as quality of light, lumen output, lumen maintenance and lifetime. Can this mini GU6.5 lamp replace a mini PGJ5? Adaptation of the luminiare is needed when going from PGJ5 to GU6.5, because of differences in lampholder, light centre length (LCL) and lamp dimensions. Will Philips keep existing PGJ5 mini lamps in the portfolio? Yes. Our PGJ5 is unique because of its smallest dimensions in the industry and we will continue future supplies of the PGJ5 mini lamp for both initial and relamping business. Frequently asked questions 3000K35W Tm Mini lamps Performance CDM-Tm Mini PGJ5 35W/930 CDM-Tm Elite Mini GU6.5 35W/930 old CDM-Tm Elite Mini GU6.5 35W/930 New lumen output Lamp efficacy (lm/W) CRI90 R940 Maintenance hrs hrs hrs 70% 60% n.a. 75% 70% n.a. 82% 80% 75% Life 50% SocketPGJ5Standard GU6.5 Comparison standard 35W mini lamps: PGJ5 vs old and new Elite GU6.5 CDM-Tm Elite Mini GU6.5 35W/930 – new generation preliminary technical data Elite

For more information, visit: ©2011Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 08/09 / UK Printed in the Netherlands