8 Products Designed For Maximum Protection

8 Products Designed For Maximum Protection At Insulmastic we invest in research and development of new products for corrosion protection, sealing and repair problems. We are constantly seeking innovative ways to economically and easily solve problems on board, or on site. 8 Products Designed For Maximum Protection

Modern Polymer modification process Heavy Duty Strips (5mm) Reinforced Mesh Modern Polymer modification process Costs up to 50% less than Ram-Nek competitors Non-removable Poly core Sealant Mesh Sealant Peel-off paper backing

Easy to Apply 4 Remove paper backing from CanSeal® Strip and press into place, covering hatch joint 1 Surface must be clean and dry 2 Remove loose rust and old tape 5 Step firmly on the full length of tape 3 A thin layer of old CanSeal® can be used as a base for the new application 6 In cold weather it is advisable to heat the hatch surface and adhesive side of tape before application

Roll-type Marine Tape High tack adhesive mastic Textured silver backing Combines quality and convenience Costs up to 50% less than the competition

Tape Test 30 Metric Ton Covers Tape holds the Cover down

Helps make steel hatch covers watertight even under heavy seas conditions

Preparation of the steel hatch is very important

Protects your pipes,valves and fittings against corrosion Minimum preparation for application Protects new or corroded surfaces Withstands temperatures -40ºC to 65ºC Crews can be easily trained for application

Avoid this common problem Use PetroWrap®

High temperature pipe dressing for corrosion protection of steam pipes, valves, windlass cylinder blocks and deck winches Forms a flexible “skin” when cured, will not crack or peel during expansion and contraction of pipes Withstands temperatures -60ºC to 230ºC SteamKote® Is the only non-flammable pipe dressing

Avoid this expensive and time consuming corrosion problem

Application is easy and no major preparation is necessary

One-step application in Blanket and Tape formats Quick and easy way to insulate high temperature surfaces in engine rooms One-step application in Blanket and Tape formats Easily removed and reinstalled using ExoWrap® ‘Silhesive’ Tape Rated for use to 1000ºC max Meets IMO Resolution MSC.61(67) Meets SOLAS Regulation ll - 2/15.2.10

ExoWrap® Blanket For use on straight pipes, valves, exhaust equipment, turbo chargers, angled and uneven surfaces and anywhere that insulation is required. ExoWrap® Blankets are secured with ExoWrap® ‘Silhesive’ Tape for ease of maintenance. Pipe (1-2 m) Blanket Blanket (aluminum backing) Sealing Tape applied Blanket (aluminum backing) Pipe (1-2 m) Pipe (1-2 m)

ExoWrap® Tape For use on bent and flanged pipes in areas where maintenance is not a consideration and/or space is limited. ExoWrap® has a pressure sensitive adhesive on the inner side for ease of installation. Completey wound at thread and welded area Pipe ExoWrap Tape wrapped in spiral motion ExoWrap blanket cut to cover the pipe Pipe

Available in various widths which can be cut to size for use Designed to contain the spray of hazardous liquids in vessel engine rooms Available in various widths which can be cut to size for use on flanges, valves, fittings, or any irregular shaped surfaces Easily installed using our drawstring system Removable, reusable and extremely durable Pocket Lacing Wire Shield Special cut holes Meets SOLAS Regulation II -2 / 15.2.11

Aluminum/glass cloth jacketing system designed to prevent the flammable spray of hot oil Available in Tape and Sheet formats Coated on one side with a silicone adhesive for ease of installation and superior adhesion Meets SOLAS Regulation ll - 2/15.2.11

Completely wrapped pipe and all connecting devices NoSpray Tape Wrap snugly around Flange Hot Surface Leaking Oil Leaking Oil

A complete system for making emergency repairs to any pipe material Fiberglass tape impregnated with water-activated resin that sets in minutes No measuring, no mixing, no messy clean-up

A tub of epoxy for filling and sealing A pair of gloves Each Kit comes with A roll of CanFix cloth A tub of epoxy for filling and sealing A pair of gloves Application instructions Approved and used by the U.S. Navy and Coast Guard

Worldwide Distributors Turkey U.A.E Vietnam Australia Belgium/Netherlands Brazil Canada - Vancouver Chile China Denmark Finland Germany Greece Hong Kong Houston Iceland India Iran Iraq Italy Korea Lithuania Los Angeles New Orleans Pakistan Panama Peru Russia Saudi Arabia Singapore South Africa Spain Taiwan